1/51
Comprehensive vocabulary flashcards covering Managing Quality (TQM and tools), Statistical Process Control (SPC and process capability), and Lean Operations (JIT, TPS, and waste reduction).
Prevention Costs
Costs associated with reducing the potential for defective parts or services, including quality assurance systems and the design, development, or purchase of inspection equipment.
Appraisal Costs
Costs related to evaluating products, processes, parts, and services, including quality audits and the calibration and maintenance of equipment used in inspection activities.
Internal Failure Costs
Costs resulting from producing defective parts or services before delivery to customers, such as scrap that cannot be repaired and the re-inspection of rectified work.
External Failure Costs
Costs occurring after defective items or services are delivered to the customer, such as handling warranty claims and servicing customer complaints.
Total Quality Management (TQM)
A management approach that encompasses the entire organization from supplier to customer, emphasizing a companywide drive toward excellence in all aspects of products and services important to the customer.
Deming's 14 Points
A framework for implementing quality improvement that includes creating consistency of purpose, ceasing dependence on inspection, driving out fear, breaking down departmental barriers, and involving everyone in the transformation.
PDCA Model
Shewhart's continuous improvement cycle consisting of four steps: 1. Plan (identify the pattern and make a plan), 2. Do (test the plan), 3. Check (check if the plan is working), and 4. Act (implement the plan and document).

Kaizen
The Japanese term describing the ongoing, unending process of continuous improvement across people, equipment, suppliers, materials, and procedures.
Six Sigma
A comprehensive system designed to reduce defects and lower costs, statistically defined as a process operating at 99.9997% capability, yielding no more than 3.4 defects per million opportunities (DPMO).
DMAIC
The five-step Six Sigma improvement discipline consisting of Define project purpose, Measure the process, Analyze data for repeatability and reproducibility, Improve by modifying or redesigning processes, and Control the new process.
Employee Empowerment
The practice of involving employees in product and process improvements, addressing the reality that 85% of quality problems stem from materials and processes.
Quality Circle
A group of employees who meet regularly with a facilitator to solve work-related problems using planning, problem-solving, and statistical methods.
Benchmarking
The process of selecting best practices from internal or external leaders to establish a standard of performance.
Quality Robustness
The Taguchi concept describing the ability to produce products uniformly in adverse manufacturing and environmental conditions so that small variations do not destroy product quality.
Quality Loss Function (QLF)
A Taguchi concept showing that societal, customer, and producer costs increase as a product characteristic deviates from its target value.
Check Sheet
A TQM tool providing an organized method for recording data in real time.
Scatter Diagram
A TQM tool that plots the value of one variable against another variable to identify potential relationships or correlations.
Cause-and-Effect Diagram
A schematic quality tool (also known as an Ishikawa or fishbone diagram) that identifies process causes across categories such as materials, methods, manpower, and machinery affecting an outcome.
Pareto Chart
A quality graph that plots defects or problems in descending order of frequency to prioritize problem-solving efforts.
Flowchart
A process diagram that graphically describes the step-by-step sequence of actions in a system or operation.
Histogram
A graphical representation showing the frequency distribution of occurrences across ranges of a variable.
Statistical Process Control Chart
A graph with time on the horizontal axis used to plot values of a statistic relative to upper and lower control limits.
Source Inspection
A quality control approach, also known as source control, based on the principle that the next step in the process is the customer, ensuring perfect product handoff.
Poka-Yoke
A foolproof device or technique designed to prevent errors and ensure that only acceptable products pass through a process.

Attribute Inspection
A quality evaluation method that categorizes items dichotomously as either acceptable or defective (good or bad) without measuring the degree of failure.
Variable Inspection
A quality evaluation method that measures continuous dimensions such as weight, speed, height, or strength to determine if they fall within an acceptable range.
LEARN Routine
Marriott's service recovery framework consisting of five steps: Listen, Empathize, Apologize, React, and Notify.
Statistical Process Control (SPC)
A process control system designed to provide a statistical signal when assignable causes of variation are present in an operation.
Natural Variations
Common causes of variation inherent to virtually all production processes that follow an expected, stable probability distribution over time.
Assignable Variations
Special causes of variation that can be traced to a specific change or reason in a process, requiring identification and elimination.
Central Limit Theorem
A statistical theorem stating that sample means drawn from any population will approach a normal distribution with mean μ and standard error σxˉ=nσ.
xˉ-Chart
A variables control chart used to track changes in the central tendency (mean) of a process over time.
R-Chart
A variables control chart that monitors process variability and dispersion over time by plotting the difference between the largest and smallest values in each sample.
Process Capability
A measure of the relationship between the natural variation of a process and design specifications to verify that output meets required standards.
Process Capability Ratio (Cp)
A capability ratio calculated as Cp=6σUpper Specification−Lower Specification, requiring a value of at least 1.0 for a process to be considered capable.
Process Capability Index (Cpk)
A capability index that accounts for process centering, defined as Cpk=min(3σUpper Specification−xˉ,3σxˉ−Lower Specification), requiring a minimum value of 1.0 for process capability.
Acceptance Sampling
A quality testing procedure for incoming lots or finished shipments where random samples are inspected to decide whether to accept or reject the entire lot.
Lean Operations
An operational system that focuses on eliminating waste, reducing process variability, and improving throughput to deliver value from the customer's perspective.
Waste
Any activity or resource that does not add value from the customer point of view, including storage, inspection, delay, waiting, and defective products.
Ohno's Seven Wastes
Taiichi Ohno's categorization of non-value-adding operational waste: overproduction, queues, transportation, inventory, motion, overprocessing, and defective products.
5Ss
A Lean workplace organization system consisting of Sort/segregate, Simplify/straighten, Shine/sweep, Standardize, and Sustain/self-discipline, often expanded with Safety and Support/maintenance.
Variability
Any deviation from the optimum process caused by internal or external factors, often hidden by excess inventory.
Manufacturing Cycle Time
The elapsed duration from the arrival of raw materials at a facility to the final shipping of the finished customer order.
Pull System
A production scheduling approach where units are produced and moved only when signaled by downstream demand.
Push System
A production scheduling system that dumps orders and materials on downstream workstations regardless of immediate need or capacity.
Just-in-Time (JIT)
An operational philosophy where materials arrive exactly where and when they are needed in the exact quantity required, removing inventory buffers and exposing problems.
Supplier Partnerships
Collaborative relationships between buyers and suppliers built on mutual trust to eliminate waste, remove in-plant and in-transit inventory, and improve quality.
Toyota Production System (TPS)
An operations model characterized by continuous improvement (kaizen), respect for people as knowledge workers, standard work practices, and jidoka.
Jidoka
The Lean practice of stopping the production line automatically or manually whenever an abnormality or defect is detected.
Andon
A visual display board and signaling system used to communicate production abnormalities and line stops in real time.
Kanban
A Japanese visual authorization card or signal indicating the need to produce or transfer a small batch of components in a pull system.
Gemba Walk
The management practice of walking through the actual place where work is performed to observe operations, engage with workers, and identify improvements.