Bipolar Junction Transistor (BJT) Fundamentals and Biasing

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/22

flashcard set

Earn XP

Description and Tags

Vocabulary flashcards covering the history, structure, operating regions, terminal relationships, amplifier configurations, and biasing circuits of Bipolar Junction Transistors (BJTs).

23 Terms

1
New cards

Vacuum Tube (Valve)

An electronic device that controls electric current flow in a vacuum between electrodes, functioning as an amplifier, switch, or rectifier.

2
New cards

Thermionic Emission

The process in which a heated element (cathode) emits electrons across a vacuum toward a positive electrode (anode).

3
New cards

Vacuum Tube Diode

A two-electrode vacuum tube device invented in 1904 by J. A. Fleming.

4
New cards

Vacuum Tube Triode

A three-electrode vacuum tube device invented in 1906 by Lee de Forest.

5
New cards

PN Junction

A semiconductor interface structure discovered in 1939 by Russell Ohl.

6
New cards
<p>Point Contact Transistor</p>

Point Contact Transistor

The first solid-state transistor developed in 1947 by Walter Brattain and John Bardeen, made with gold foil contacts on an n-type germanium slab.

7
New cards

William Shockley

The physicist who successfully created the Bipolar Junction Transistor (BJT).

8
New cards

John Robinson Pierce

The individual who coined the term "transistor".

9
New cards

Bipolar Junction Transistor (BJT)

A three-terminal semiconductor device using two different types of materials (n-type and p-type) and opposite polarity biasing voltages, where both holes and electrons participate in conduction.

10
New cards

BJT Terminal Current Equation

The mathematical relationship relating the three BJT terminal currents: IE=IB+ICI_E = I_B + I_C.

11
New cards

Cut-off Region

The BJT operating state where both the base-emitter (B-E) and base-collector (B-C) junctions are reverse biased, resulting in IB=0I_B = 0, IC=0I_C = 0, and VCE=VCCV_{CE} = V_{CC}, acting as an open switch ("fully-OFF").

12
New cards

Forward Active Region

The BJT operating state where the base-emitter (B-E) junction is forward biased (VBE≥0.7 VV_{BE} \ge 0.7\,\text{V}) and the base-collector (B-C) junction is reverse biased, allowing the transistor to act as an amplifier.

13
New cards

Saturation Region

The BJT operating state where both the base-emitter (B-E) and base-collector (B-C) junctions are forward biased, yielding VCE=VCE,sat≈0.2 VV_{CE} = V_{CE,\text{sat}} \approx 0.2\,\text{V}, acting as a closed switch ("fully-ON").

14
New cards

Inverse Active Region

The BJT operating region where the base-emitter (B-E) junction is reverse biased and the base-collector (B-C) junction is forward biased, primarily used in digital circuits.

15
New cards

BJT Characteristic Curve

A plot of collector current (ICI_C) against collector-to-emitter voltage (VCEV_{CE}) showing the saturation region, active region (Q-point), and cut-off region.

<p>A plot of collector current ($$I_C$$) against collector-to-emitter voltage ($$V_{CE}$$) showing the saturation region, active region (Q-point), and cut-off region.</p>
16
New cards

Common Emitter (CE) Configuration

A transistor configuration providing moderate voltage gain, moderate current gain, highest power gain, moderate impedances, a 180∘180^\circ phase shift, and universal circuit application.

17
New cards

Common Base (CB) Configuration

A transistor configuration with input at the emitter and output at the collector, providing highest voltage gain, lowest current gain, lowest input impedance, highest output impedance, no phase shift, and application in RF amplifiers.

18
New cards

Common Collector (CC) Configuration

A transistor configuration with input at the base and output at the emitter, providing highest current gain, lowest voltage gain, highest input impedance, lowest output impedance, no phase shift, and application in signal isolation.

19
New cards

Bias

The application of DC voltages to establish a fixed level of current and voltage to set a transistor's operating point.

20
New cards

Fixed Bias

A biasing method that sets a transistor's operating point using a base resistor (RBR_B) tied to VCCV_{CC}, establishing a constant base current.

21
New cards

Collector Feedback Bias

A biasing configuration where the base resistor (RBR_B) is connected to the collector, feeding back a portion of the output voltage to automatically stabilize base current against temperature or parameter changes.

<p>A biasing configuration where the base resistor ($$R_B$$) is connected to the collector, feeding back a portion of the output voltage to automatically stabilize base current against temperature or parameter changes.</p>
22
New cards

Emitter Feedback Bias

A biasing technique where an emitter resistor (RER_E) is added to introduce negative feedback, offsetting increases in collector current with opposing changes in base-emitter voltage.

23
New cards

Voltage Divider Bias

A widely used biasing method where resistors R1R_1 and R2R_2 form a voltage divider to set base voltage, and an emitter resistor (RER_E) provides operating point stabilization.

<p>A widely used biasing method where resistors $$R_1$$ and $$R_2$$ form a voltage divider to set base voltage, and an emitter resistor ($$R_E$$) provides operating point stabilization.</p>