1/64
Looks like no tags are added yet.
Homeostasis
Maintaining a near-constant, steady internal state (e.g., temperature, pH, glucose, water balance) despite changes in the environment.
Negative feedback
A control mechanism that reduces the stimulus, bringing conditions back toward the set point. Used to maintain homeostasis.
Positive feedback
A control mechanism that amplifies the stimulus, driving the change further away from the starting point. Used to deviate from homeostasis (e.g., blood clotting).
Is a thermostat positive or negative feedback?
Negative feedback: too cold turns the heater on, too hot turns it off, so the temperature returns to the set point.
Thermoregulation and why it matters
Maintaining internal temperature within a normal range. Important because enzyme function depends on temperature (and pH); outside the range enzymes slow down or denature.
Ectotherm
An animal that gains heat from its surroundings, so body temperature changes with the environment (reptiles, amphibians, fish, invertebrates). It regulates temperature mostly by behavior.
Ectotherm pros and cons
Pro: saves lots of energy. Con: metabolism and movement slow down when it is cool.
Endotherm
An animal that generates body heat through metabolism and keeps a near-constant body temperature (birds and mammals).
Endotherm pros and cons
Pro: can be active at any time of day or temperature. Con: uses a lot of energy to stay warm, especially small animals that lose heat quickly.
How do endotherms regulate body temperature?
Sweating, shivering, and dilating or constricting blood vessels in the skin.
Osmoregulation and why it matters
Maintaining solute concentrations and water balance. Cells must stay isotonic with their environment, and toxic solutes (e.g., amino groups from protein breakdown) must be excreted.
Paramecium: osmotic challenge and solution
A freshwater protist is in a hypotonic environment, so water constantly flows in. Its contractile vacuole actively pumps water out.
Osmotic challenge of a marine fish
The ocean is hypertonic to the fish, so it tends to lose water. It drinks constantly and rarely urinates.
Osmotic challenge of a freshwater fish
The lake is hypotonic to the fish, so it tends to gain water. It rarely drinks and urinates a lot.
Which organ releases insulin and glucagon?
The pancreas. The hormones travel through the bloodstream to affect other cells.
Insulin
Lowers blood glucose: stimulates the liver to form glycogen from glucose and stimulates body cells to take up glucose. Released after a meal.
Glucagon
Raises blood glucose: stimulates the liver to break down glycogen into glucose and release it into the blood. Released between meals when glucose is low.
Why is it important to keep blood glucose fairly constant?
Cells need a steady supply of glucose for energy. Levels that are too low starve cells, and levels that are too high are harmful. Insulin and glucagon keep it in range by negative feedback.
Three phases of cell signaling
Reception (ligand binds receptor), transduction (signal is relayed and amplified inside the cell), and response (a specific change in cell behavior).
Ligand
A signaling molecule that binds to a specific receptor protein to start a cellular response.
Why does a ligand affect only particular cells?
Only cells with the right receptor respond, because the receptor's shape must be complementary to the ligand's shape.
Can one ligand affect more than one type of cell, and in the same way?
It can affect many cell types, but not always in the same way. Different receptors and intracellular proteins give different responses, so the same hormone can have different effects.
Epinephrine effects: liver cell, skeletal muscle blood vessel, intestinal blood vessel
Liver cell: breaks down glycogen to glucose and releases it. Skeletal muscle blood vessel: dilates. Intestinal blood vessel: constricts.
Two types of cellular responses to a signal
Altering enzyme activity (short-term) or changing gene expression (long-term).
Autocrine signaling
Secreted molecules trigger a response in the same cell that secreted them (self-signaling). Example: some cancer cells release their own growth factors.
Juxtacrine signaling
Cells communicate by direct contact, through gap junctions (animal cells), plasmodesmata (plant cells), or contact between surface molecules (some immune cells).
Gap junctions vs. plasmodesmata
Both are cytoplasmic channels between neighboring cells. Gap junctions: animal cells (e.g., heart muscle contracting together). Plasmodesmata: plant cells.
Paracrine signaling
Secreted molecules trigger a response in nearby cells. Examples: quorum sensing, induction during development, neurotransmitters crossing a synapse.
Endocrine signaling
Hormones are secreted into the bloodstream and can affect cells anywhere in the body (e.g., insulin, TSH, epinephrine).
Classify: pituitary TSH acting on the thyroid; pancreas insulin acting on liver
Both are endocrine signaling (hormones travel through the bloodstream to distant target cells).
Quorum sensing
Bacteria release signaling molecules; when enough cells are present, the signal concentration changes behavior in all of them. Example: dental plaque. It is a form of paracrine signaling.
Why would bacteria only make a toxin when many cells are present?
One bacterial cell cannot make enough toxin to overcome a host, so natural selection favors toxin production only when there are enough cells to be effective.
Morphogens and induction in development
Signals from neighboring cells or a concentration gradient of morphogens change gene expression, so cells at different distances differentiate into different tissues.
Key point: do hormones reach all cells?
Yes, hormones travel to all body cells in the bloodstream, but only cells with the appropriate receptor respond.
Steroid hormones: solubility and receptor location
Lipid-soluble, so they diffuse across the plasma membrane and bind intracellular receptors (in the cytoplasm or nucleus).
Steroid hormone mechanism
Hormone crosses the membrane and binds its receptor; the hormone-receptor complex enters the nucleus, binds DNA, and acts as a transcription factor that turns specific genes on or off to make new proteins.
Steroid hormones: effect and examples
Change gene expression and cause long-term changes (e.g., secondary sex characteristics). Examples: testosterone and estrogens.
Water-soluble hormones: receptor location and why
They cannot cross the lipid bilayer, so they bind receptors on the cell surface (plasma membrane).
Water-soluble hormones: effect and examples
Trigger a signal transduction pathway that changes enzyme activity, causing short-term changes. Examples: epinephrine, insulin, melatonin (proteins, polypeptides, or amines).
Steroid vs. water-soluble hormones: quick comparison
Steroid: receptor inside the cell, changes gene expression, long-term. Water-soluble: receptor in membrane, signaling cascade that alters enzymes, short-term.
Signal transduction pathway
A series of steps in which the binding of a signaling molecule leads to a cellular response.
G protein
A protein that is active when bound to GTP and inactive when bound to GDP.
G protein-coupled receptor (GPCR)
A membrane receptor that, when activated by a ligand, activates a G protein by causing it to swap GDP for GTP.
Protein kinase
An enzyme that transfers a phosphate group from ATP to another protein (phosphorylation), usually activating it by changing its shape.
Why does phosphorylation activate a protein?
The added phosphate changes the protein's shape into the active form, similar to an allosteric activator.
Second messenger
A small molecule or ion (e.g., cAMP, cGMP, Ca2+, IP3) that relays the signal inside the cell. Its small size lets it diffuse quickly, giving a fast response.
First vs. second messenger
First messenger: the original ligand outside the cell (e.g., epinephrine, nitric oxide). Second messenger: the small intracellular molecule that carries the signal (e.g., cAMP, cGMP).
Epinephrine signal transduction steps
1) Epinephrine binds a GPCR. 2) The receptor activates a G protein (GDP -> GTP). 3) The G protein activates an enzyme that makes cAMP from ATP. 4) cAMP starts a kinase cascade. 5) The target enzyme breaks down glycogen into glucose.
Epinephrine's role
Triggers the fight-or-flight response by raising blood glucose through glycogen breakdown to supply energy.
Amplification
One signal molecule produces a very large response because each protein in the pathway activates many proteins in the next step (e.g., one epinephrine leads to thousands of glucose molecules).
Tyrosine kinase receptors
Ligand binding makes two receptors join together; each phosphorylates the other, activating them and starting a transduction pathway.
Ion channel receptors
Ligand binding opens a channel in the receptor so ions can enter or exit the cell (e.g., between nerve cells).
IP3 and Ca2+ as second messengers
Some pathways use IP3, which triggers release of Ca2+ that acts as a further messenger. It is still called a second messenger system.
Yeast mating pathway: key players
Mating factor (ligand) binds a G protein-coupled receptor, which activates a G protein and a phosphorylation cascade. The kinase Fus3 phosphorylates formin, which builds microfilaments to form the shmoo projection.
Cytoskeleton and shape change in a cell
The cytoskeleton is a network of protein filaments that supports the cell and gives it shape. Building more microfilaments in one region lets the cell grow a projection.
Nitric oxide signaling pathway
Nitric oxide (first messenger) activates guanylate cyclase in smooth muscle, which converts GTP to cGMP (second messenger). cGMP lowers Ca2+ so the muscle relaxes and blood flows in.
How does Viagra work?
It inhibits PDE-5, the enzyme that inactivates cGMP. cGMP stays active longer, so smooth muscle stays relaxed and an erection is maintained.
Blood clotting as positive feedback
Injury activates clotting factors, which convert prothrombin to thrombin. Thrombin activates more clotting factors (amplifying the change) and converts fibrinogen to fibrin, forming a clot.
Why can't people with hemophilia form clots?
They cannot convert prothrombin to thrombin, and thrombin is needed to produce fibrin and form a blood clot.
Pathway symbols: arrow vs. blunt-ended arrow
Normal arrow = activates or increases. Blunt arrow = inhibits or decreases.
How do you determine the overall effect of a multi-step pathway?
Count the inhibitions: an even number cancels out, so the start activates the end; an odd number means the start inhibits the end.
W activates X, X inhibits Y, Y inhibits Z. What does W do to Z?
W activates Z, because inhibiting an inhibitor cancels out (X inhibits Y, so Y can no longer inhibit Z).
A activates B, B activates C, C inhibits D. What does A do to D?
A inhibits D (one inhibition, so it does not cancel out).
J inhibits K, K activates L, L inhibits M. What does J do to M?
J activates M (two inhibitions cancel out).
Acetylcholine -> receptor -| heart rate: what is the effect?
Acetylcholine decreases heart rate, because the pathway ends with an inhibition.