1/19
Looks like no tags are added yet.
What are the 3 layers of the Hierarchical Design Model?
Access Layer
2. Distribution Layer
3. Core Layer[cite: 1]
When should you use a 3-Tier Hierarchical Design instead of a Collapsed Core?
When your campus spans multiple buildings and requires more than two distribution switches. The Core layer connects all buildings together.[cite: 1, 3]
When should you use a 2-Tier (Collapsed Core) Design?
For smaller campus sites spanning a single building (with multiple floors) where the Core and Distribution layers are combined.[cite: 1, 3]
What is the primary role of the Access Layer?
Provides end-user and endpoint access, handles VLAN segmentation, and acts as the QoS trust point (classification/marking happens here, not traffic queuing).[cite: 1]
What is the primary role of the Distribution Layer?
Aggregates access layer switching, acts as the services and control boundary between Core and Access, defines the Layer 2 STP boundary (down to Access) and Layer 3 IP routing boundary (up to Core), and performs IP route summarization.[cite: 1]
What is the primary role of the Core Layer?
Serves as the high-speed core backbone of the LAN, interconnecting distribution and edge segments (especially when connecting more than 3 distribution blocks).[cite: 1]
What are the two categories of High Availability (HA) network design?
What are 4 key techniques for Network-Level High Availability?
What are 5 key techniques for System-Level High Availability?
How does CEF (Cisco Express Forwarding) assist during a Route Processor (RP) failover?
The standby RP continues forwarding traffic using the pre-populated FIB data while waiting for routing adjacencies to reconverge.[cite: 1]
What 4 HA technologies allow traffic to keep forwarding during a Route Processor (RP) failover on dual-RP Cisco devices?
How do SSO and NSF work together, and what is their main limitation?
SSO syncs Layer 2 state info to the standby RP, while NSF syncs the Layer 3 FIB so traffic keeps forwarding during failover. Limitation: They do NOT prevent neighboring routers from dropping routes due to dead adjacencies (requires GR or NSR).[cite: 2]
How does Graceful Restart (GR) protect the Layer 3 data plane during an SSO/NSF failover?
GR uses routing protocol extensions (IETF RFC 4729) to tell neighboring routers to maintain OSPF/EIGRP adjacencies and keep forwarding traffic during an RP switchover. Note: Neighboring "GR-aware" routers do not need dual RPs or SSO/NSF themselves.[cite: 2]
What is Nonstop Routing (NSR) and when is it best used?
NSR is an internal router feature that maintains routing protocol adjacencies and TCP sockets internally without relying on neighbor assistance. It is best used when neighbors are GR-unaware.[cite: 2]
How can you combine NSR and GR in the same network?
Because NSR is CPU-intensive, use GR for neighbors that are GR-aware and reserve NSR only for GR-unaware neighbors.[cite: 2]
In a Two-Tier (Collapsed Core) campus design, what are the 4 standard functional edge/service blocks?
What is a "Simplified Campus Design"?
A campus architecture using VSS or StackWise Virtual (SVL) for the Core/Distribution layer combined with StackWise switch stacking at the Access layer.[cite: 3]
What is the best practice for VLANs in a Layer 2 Access Layer design?
Restrict each VLAN to a single access switch. Extending the same VLAN across multiple access switches forces STP to block uplinks, reducing available bandwidth.[cite: 3]
If a VLAN must span multiple Layer 2 access switches, how should you optimize STP and FHRPs?
Put odd VLANs on Distribution Switch 1 and even VLANs on Distribution Switch 2 so STP blocks fewer links. Use GLBP (if the topology is loop-free) to load-balance traffic across both uplinks, or use HSRP/VRRP.[cite: 3]
What are the pros and cons of a Layer 3 Access Layer design?
Pros: Routing extends down to the access switch, eliminating STP and FHRPs, maximizing uplink bandwidth, and giving faster EIGRP/OSPF convergence.
Cons: More expensive and cannot be used if Layer 2 VLANs must span multiple access switches.[cite: 3]