Diffraction and Crystal Structures

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/99

flashcard set

Earn XP

Description and Tags

Comprehensive practice flashcards covering crystal lattices, Bravais systems, close packing, X-ray generation, diffractometer geometries, Bragg's law, indexing techniques, systematic absences, structure factors, and past exam diffraction problems.

100 Terms

1
New cards

How is a crystalline solid defined in terms of its internal components?

A crystal is an array of atoms or molecules in space that can be described using a lattice (which defines the periodic translational symmetry) and a basis (the identical atoms or molecules that decorate each lattice point).

2
New cards

What is the crystallographic definition of a lattice?

A lattice is an array of points in space that describes the periodic translational symmetry of a crystal structure.

3
New cards

What is a basis in crystal structure description?

A basis consists of the atom, group of atoms, molecule, or assembly of molecules that sits on every lattice point to build up the entire crystal structure.

4
New cards

How does the atomic arrangement of a glassy material such as SiO2 differ from that of a crystal?

In a glass, the local coordination environment is preserved (e.g. tetrahedral coordination around SiSi), but there is no long-range periodic translational symmetry or crystalline order.

5
New cards

What fundamental condition must all basis units within a single crystal satisfy?

All basis units decorating the lattice points within a crystal must be identical in composition, structure, and orientation.

6
New cards
<p>What molecule is shown here, and why must its orientation be accounted for when defining the crystal lattice and basis?</p>

What molecule is shown here, and why must its orientation be accounted for when defining the crystal lattice and basis?

This is a C60C_{60} fullerene molecule; because translation alone cannot change the spatial orientation of a molecule, alternating orientations require either a different lattice or a multi-molecule basis.

7
New cards

What mathematical relationship defines a primitive Bravais lattice?

All pairs of lattice points r\mathbf{r} and r′\mathbf{r}' satisfy the vector equation r′=r+n1a+n2b+n3c\mathbf{r}' = \mathbf{r} + n_1\mathbf{a} + n_2\mathbf{b} + n_3\mathbf{c} for integer values of n1n_1, n2n_2, and n3n_3, where a\mathbf{a}, b\mathbf{b}, and c\mathbf{c} are the lattice vectors.

8
New cards

How many lattice points and basis units are present in a primitive unit cell?

A primitive unit cell contains exactly 11 lattice point and therefore exactly 11 basis unit.

9
New cards
<p>What are the six lattice parameters shown that define the size and shape of a 3D unit cell?</p>

What are the six lattice parameters shown that define the size and shape of a 3D unit cell?

Three axial lengths (aa, bb, and cc) and three interaxial angles (α\alpha between bb and cc, β\beta between aa and cc, and γ\gamma between aa and bb).

10
New cards

What essential rotational symmetry element defines a cubic crystal system?

A cubic crystal system is formally defined by having four 33-fold rotation axes inclined at 109.47∘109.47^\circ along the cube body diagonals.

11
New cards

What rotational symmetry element is required for a lattice to be classified as tetragonal?

A tetragonal lattice requires exactly one 44-fold rotation axis.

12
New cards

What symmetry elements define an orthorhombic lattice system?

Three 22-fold rotation axes mutually inclined at 90∘90^\circ, or three mirror planes inclined at 90∘90^\circ.

13
New cards

What symmetry element characterizes a monoclinic crystal system?

A monoclinic crystal system requires either one 22-fold rotation axis or one mirror plane.

14
New cards

What rotational or mirror symmetry is present in a triclinic lattice?

None; a triclinic lattice possesses no rotational symmetry axes or mirror planes.

15
New cards

What symmetry element defines a rhombohedral lattice system?

A rhombohedral lattice system requires exactly one 33-fold rotation axis.

16
New cards

What symmetry element defines a hexagonal lattice system?

A hexagonal lattice system requires exactly one 66-fold rotation axis.

17
New cards

How many unique three-dimensional Bravais lattices exist?

There are exactly 1414 unique three-dimensional Bravais lattices.

18
New cards

What are the fractional coordinates of the lattice points in a body-centred cubic (BCC) unit cell?

There are 22 lattice points per unit cell located at (x,y,z)(x, y, z) and (x+12,y+12,z+12)(x+\frac{1}{2}, y+\frac{1}{2}, z+\frac{1}{2}), typically taken as (0,0,0)(0, 0, 0) and (12,12,12)(\frac{1}{2}, \frac{1}{2}, \frac{1}{2}).

19
New cards

What are the fractional coordinates of the lattice points in a face-centred cubic (FCC) unit cell?

There are 44 lattice points located at (x,y,z)(x, y, z), (x+12,y+12,z)(x+\frac{1}{2}, y+\frac{1}{2}, z), (x+12,y,z+12)(x+\frac{1}{2}, y, z+\frac{1}{2}), and (x,y+12,z+12)(x, y+\frac{1}{2}, z+\frac{1}{2}), typically taken with (x,y,z)=(0,0,0)(x, y, z) = (0, 0, 0).

20
New cards

Why is there no C-centred cubic Bravais lattice?

A C-centred cubic arrangement breaks the cubic symmetry by destroying the four 33-fold axes and is geometrically equivalent to a primitive tetragonal lattice.

21
New cards

What is the layer stacking sequence of a hexagonal close-packed (HCP) array of spheres?

The layer stacking sequence is ABABAB…ABABAB\dots, where the third layer directly eclipses the first layer.

22
New cards

What is the layer stacking sequence of a cubic close-packed (CCP) array of spheres?

The layer stacking sequence is ABCABC…ABCABC\dots, where the third layer occupies hollows distinct from both the first and second layers.

23
New cards

How many atoms are in the hexagonal unit cell of an HCP element, and what are their fractional coordinates?

There are 22 atoms per unit cell located at (0,0,0)(0, 0, 0) and (13,23,12)(\frac{1}{3}, \frac{2}{3}, \frac{1}{2}), despite there being only 11 lattice point.

24
New cards

How many atoms are present in an FCC unit cell of a close-packed metal, and what are their coordinates?

There are 44 atoms per unit cell located at (0,0,0)(0, 0, 0), (12,12,0)(\frac{1}{2}, \frac{1}{2}, 0), (0,12,12)(0, \frac{1}{2}, \frac{1}{2}), and (12,0,12)(\frac{1}{2}, 0, \frac{1}{2}).

25
New cards

How are the octahedral interstitial holes occupied in the Rock Salt (NaCl) crystal structure?

The chloride anions form a CCP (FCC) array, and the sodium cations occupy all of the octahedral interstitial holes.

26
New cards

How are the interstitial sites occupied in the Fluorite (CaF2) crystal structure?

Calcium cations form a CCP (FCC) array, and fluoride anions occupy all of the tetrahedral interstitial holes.

27
New cards

How are the tetrahedral sites occupied in the Zinc Blende (sphalerite ZnS) structure?

Sulfide anions form a CCP array, and zinc cations occupy one-half of the tetrahedral interstitial holes.

28
New cards

How are the interstitial sites occupied in the nickel arsenide (NiAs) crystal structure?

Arsenic atoms form an HCP array, and nickel atoms occupy all of the octahedral interstitial sites.

29
New cards

How are the tetrahedral sites occupied in the Wurtzite (ZnS) crystal structure?

Sulfide ions form an HCP array, and zinc ions occupy one-half of the tetrahedral interstitial sites.

30
New cards

What physical principle allows a crystal to act as a diffraction grating for X-rays?

A periodic array of atoms acts as a diffraction grating because the interatomic lattice spacings (typically 1 to 20 A˚1\text{ to }20\,\text{Å}) are on the same order of magnitude as X-ray wavelengths.

31
New cards

What is the conversion factor between Ångströms, metres, and picometres?

1 A˚=10−10 m=100 pm1\,\text{Å} = 10^{-10}\,\text{m} = 100\,\text{pm}.

32
New cards

Besides X-rays, what particle beams can be used for diffraction experiments if their de Broglie wavelengths match lattice spacings?

Electrons and neutrons.

33
New cards

What is Bragg's Law, and what geometric condition does it express?

nλ=2dsin⁡(θ)n\lambda = 2d\sin(\theta), which expresses that the path difference (2x=2dsin⁡(θ)2x = 2d\sin(\theta)) between waves reflected from adjacent lattice planes separated by distance dd must equal an integer number of wavelengths (nλn\lambda) for constructive interference.

34
New cards

What are Miller indices (h, k, l)?

Miller indices are the reciprocals of the fractional unit cell intercepts, indicating planes that cut the crystal axes at (1h,1k,1l)(\frac{1}{h}, \frac{1}{k}, \frac{1}{l}).

35
New cards

What are the Miller indices for a set of planes in a 2D square lattice that intercept the x-axis once and the y-axis twice per unit cell?

The (1,2)(1, 2) planes.

36
New cards

What are the Miller indices for a set of planes intercepting the x-axis and y-axis once per unit cell, but running parallel to the z-axis?

The (1,1,0)(1, 1, 0) planes.

37
New cards

What is the formula relating the interplanar spacing dhkl to the cubic lattice parameter a?

1dhkl2=h2+k2+l2a2\frac{1}{d_{hkl}^2} = \frac{h^2 + k^2 + l^2}{a^2}, or dhkl=ah2+k2+l2d_{hkl} = \frac{a}{\sqrt{h^2 + k^2 + l^2}}.

38
New cards

What is the interplanar spacing formula for a tetragonal unit cell?

1dhkl2=h2+k2a2+l2c2\frac{1}{d_{hkl}^2} = \frac{h^2 + k^2}{a^2} + \frac{l^2}{c^2}.

39
New cards

What is the interplanar spacing formula for an orthorhombic unit cell?

1dhkl2=h2a2+k2b2+l2c2\frac{1}{d_{hkl}^2} = \frac{h^2}{a^2} + \frac{k^2}{b^2} + \frac{l^2}{c^2}.

40
New cards

What equation combines Bragg's Law with the cubic d-spacing formula to relate the diffraction angle θ to Miller indices?

sin⁡2(θ)=λ24a2(h2+k2+l2)\sin^2(\theta) = \frac{\lambda^2}{4a^2}(h^2 + k^2 + l^2).

41
New cards
<p>In the powder diffraction geometry shown, what is the opening cone angle of the diffracted radiation cones relative to the incident beam?</p>

In the powder diffraction geometry shown, what is the opening cone angle of the diffracted radiation cones relative to the incident beam?

The semi-angle is 2θ2\theta, making the full cone angle equal to 4θ4\theta.

42
New cards
<p>How are X-rays generated in the laboratory vacuum tube shown in this diagram?</p>

How are X-rays generated in the laboratory vacuum tube shown in this diagram?

A high-energy electron beam (>30 kV>30\,\text{kV}) boiled off a filament accelerates in a vacuum tube and strikes a water-cooled metal anode (such as copper), ionizing core electrons.

43
New cards

What percentage of electrical energy supplied to a sealed laboratory X-ray tube is converted into X-rays?

Less than 2%2\%; over 98%98\% of the energy is converted into heat, requiring efficient water cooling.

44
New cards

What electronic transition gives rise to the Kα characteristic X-ray emission line?

An electron falling from a 2p2p orbital into an empty hole in the 1s1s core shell (2p→1s2p \rightarrow 1s).

45
New cards

What electronic transition gives rise to the Kβ characteristic X-ray emission line?

An electron falling from a 3p3p orbital into an empty hole in the 1s1s core shell (3p→1s3p \rightarrow 1s).

46
New cards
<p>What causes the doublet splitting of Kα into Kα1 and Kα2 shown in this emission spectrum?</p>

What causes the doublet splitting of Kα into Kα1 and Kα2 shown in this emission spectrum?

Spin-orbit coupling (interaction) in the 2p2p orbital (2p3/22p_{3/2} vs 2p1/22p_{1/2}).

47
New cards

How does a thin nickel metal foil filter monochromate Cu characteristic X-rays?

Nickel has a KK absorption edge situated energetically between the Cu KαCu\,K\alpha and Cu KβCu\,K\beta lines, causing it to absorb Cu KβCu\,K\beta strongly while allowing Cu KαCu\,K\alpha to pass through.

48
New cards

What are the trade-offs between a metal foil filter and a single-crystal monochromator in laboratory XRD?

A metal foil filter is inexpensive and yields a bright beam but leaves both Kα1K\alpha_1 and Kα2K\alpha_2 present; a single-crystal monochromator isolates a single wavelength (Kα1K\alpha_1) but significantly reduces beam intensity.

49
New cards
<p>What physical process produces synchrotron light when electrons travel through the bending magnet shown?</p>

What physical process produces synchrotron light when electrons travel through the bending magnet shown?

Relativistic charged particles emit intense, highly collimated electromagnetic radiation when their path is curved (accelerated) by the magnetic field of the bending magnet.

50
New cards
<p>What are the primary stages through which electrons pass in the synchrotron facility schematic shown?</p>

What are the primary stages through which electrons pass in the synchrotron facility schematic shown?

Electrons are emitted from an electron gun, pre-accelerated in a linear accelerator (linac), accelerated to operational energy in a booster synchrotron, injected into the main storage ring, and extracted at beamlines.

51
New cards
<p>What are the operational characteristics of the Debye-Scherrer powder diffraction geometry shown?</p>

What are the operational characteristics of the Debye-Scherrer powder diffraction geometry shown?

It uses a convergent incident beam focused at the detector circle, a capillary sample, has only one moving part (detector), measures all diffracted beams in transmission, and is susceptible to sample absorption.

52
New cards
<p>What are the key advantages and drawbacks of the Bragg-Brentano diffractometer geometry shown?</p>

What are the key advantages and drawbacks of the Bragg-Brentano diffractometer geometry shown?

The divergent beam reflects off a flat-plate sample without passing through it (reducing absorption), but it requires coupled motion of both sample stage and detector and scans reflections sequentially.

53
New cards

What information in a powder XRD pattern is determined by the lattice, and what is determined by the basis?

Peak positions (2θ2\theta / dd-spacings) and presence/absence are determined by the lattice (size and symmetry); peak relative intensities are determined by the basis (via the structure factor).

54
New cards

What database contains over 200,000 recorded crystal structures used as fingerprints to identify unknown powder patterns?

The Inorganic Crystal Structure Database (ICSD).

55
New cards

What are the three common polymorphs of titanium dioxide (TiO2) that can be differentiated by powder XRD?

Anatase, Brookite, and Rutile.

56
New cards
<p>What mathematical relationship gives the crystallite thickness t from diffraction line broadening B?</p>

What mathematical relationship gives the crystallite thickness t from diffraction line broadening B?

The Scherrer Formula: t=0.9λBcos⁡(θB)t = \frac{0.9\lambda}{B\cos(\theta_B)}.

57
New cards

What do the variables t, B, and θB represent in the Scherrer Formula?

tt is the crystal thickness/crystallite size, BB is the peak broadening (full width at half maximum in radians), and θB\theta_B is the Bragg angle.

58
New cards
<p>As crystallite thickness decreases from 2000 Å to 500 Å and 200 Å, what observable change occurs in the diffraction peaks shown?</p>

As crystallite thickness decreases from 2000 Å to 500 Å and 200 Å, what observable change occurs in the diffraction peaks shown?

The diffraction peaks broaden progressively due to incomplete destructive interference at angles near the Bragg angle.

59
New cards
<p>What are the factors that determine the observed intensity Ihkl in the formula shown?</p>

What are the factors that determine the observed intensity Ihkl in the formula shown?

KK is a scaling constant, (Lp)hkl(L_p)_{hkl} is the Lorentz-polarization factor, JhklJ_{hkl} is multiplicity, FhklF_{hkl} is the structure factor, e−2Whkle^{-2W_{hkl}} is the Debye temperature factor, and AhklA_{hkl} is the absorption factor.

60
New cards

Why is the scale factor K identical for all reflections hkl in a given powder pattern?

Because KK depends exclusively on experimental bulk parameters: sample quantity, incident beam brightness, and measurement duration.

61
New cards

What is the physical origin of the Lorentz Polarization Factor (Lp)hkl?

Because an unpolarised incident X-ray beam is reflected unequally depending on polarization orientation, the reflected beam is partially polarised, introducing a dependence on Bragg angle and instrument geometry.

62
New cards

What is the multiplicity Jhkl of the {111} reflections in a cubic crystal?

J111=8J_{111} = 8, because the eight symmetry-related planes (111)(111), (1ˉ11)(\bar{1}11), (11ˉ1)(1\bar{1}1), (111ˉ)(11\bar{1}), (1ˉ1ˉ1)(\bar{1}\bar{1}1), (11ˉ1ˉ)(1\bar{1}\bar{1}), (1ˉ11ˉ)(\bar{1}1\bar{1}), and (1ˉ1ˉ1ˉ)(\bar{1}\bar{1}\bar{1}) share identical dd-spacings and 2θ2\theta angles.

63
New cards

How does thermal vibration influence diffraction peak intensities through the Debye temperature factor Whkl?

Thermal vibrations displace atoms around their mean positions, making the crystal act as a fuzzy diffraction grating; this attenuates reflection intensity increasingly at small dd-spacings (large 2θ2\theta).

64
New cards

At what angles is the absorption factor Ahkl most pronounced in powder X-ray diffraction?

At low values of 2θ2\theta, particularly for samples containing heavily absorbing elements.

65
New cards

What is the general mathematical formula for the structure factor Fhkl?

Fhkl=∑qfqcos⁡[2π(hxq+kyq+lzq)]+i∑qfqsin⁡[2π(hxq+kyq+lzq)]F_{hkl} = \sum_q f_q \cos[2\pi(hx_q + ky_q + lz_q)] + i \sum_q f_q \sin[2\pi(hx_q + ky_q + lz_q)], summing over all atoms qq in the unit cell.

66
New cards

Why can the imaginary sine term of the structure factor Fhkl be set to zero for centrosymmetric crystals?

For every atom at (x,y,z)(x, y, z), inversion symmetry dictates an identical atom at (−x,−y,−z)(-x, -y, -z); since sin⁡(−θ)=−sin⁡(θ)\sin(-\theta) = -\sin(\theta), the sine terms cancel out to zero.

67
New cards

What property of an atom or ion determines its X-ray scattering factor fq at zero scattering angle?

Its total number of electrons (ZZ).

68
New cards

Why can isoelectronic species such as Na+, F-, and O2- not be readily distinguished by X-ray diffraction?

Because they all have the same number of electrons (10 e−10\,e^-) and consequently possess virtually identical X-ray scattering factors (fqf_q).

69
New cards
<p>Why does the X-ray scattering form factor decrease as sin(θ)/λ increases, as depicted in this plot?</p>

Why does the X-ray scattering form factor decrease as sin(θ)/λ increases, as depicted in this plot?

Because the spatial extent of the electron cloud is comparable to the X-ray wavelength, rays scattered from different parts of the same atom undergo partial destructive interference at higher angles.

70
New cards

What is the Phase Problem in X-ray crystallography?

Measuring experimental diffraction intensities yields Ihkl∝∣Fhkl∣2I_{hkl} \propto |F_{hkl}|^2, which gives the magnitude ∣Fhkl∣|F_{hkl}| but completely loses the phase angle (or sign) necessary to directly calculate atomic positions.

71
New cards

What reflection condition must h, k, and l satisfy for a diffraction peak to be observed in an FCC lattice?

hh, kk, and ll must be all odd or all even (unmixed parity).

72
New cards

What reflection condition must h, k, and l satisfy for a peak to be observed in a BCC lattice?

h+k+l=2nh + k + l = 2n (the sum of hh, kk, and ll must be an even integer).

73
New cards

Why is it mathematically impossible for any reflection from a cubic crystal to have h2 + k2 + l2 = 7?

No combination of three integer squares can sum to 77 (or any integer of the form 4m(8n+7)4^m(8n + 7)).

74
New cards

In cubic pattern indexing, what lattice type is indicated if the 1/d2 ratios to the first peak yield the sequence 1, 1.333, 2.667, 3.667, 4.000?

A face-centred cubic (FCC) lattice, because multiplying by 33 yields h2+k2+l2=3,4,8,11,12h^2 + k^2 + l^2 = 3, 4, 8, 11, 12, corresponding to unmixed hklhkl values (111,200,220,311,222111, 200, 220, 311, 222).

75
New cards

In cubic indexing, what must be done if dividing 1/d2 values by the first line gives a sequence containing 7?

The values of nn must be multiplied by 22 (giving even integers 2,4,6,8,10,12,142, 4, 6, 8, 10, 12, 14), indicating a body-centred cubic (BCC) lattice with reflection condition h+k+l=2nh + k + l = 2n.

76
New cards

In the reaction of 1.00 g of TiO2 with excess NH3 at 1200 °C, 0.775 g of metallic solid is formed. What is its chemical stoichiometry?

TiN\text{TiN}; 1.00 g1.00\,\text{g} of TiO2\text{TiO}_2 (RMM=79.9 g mol−1\text{RMM} = 79.9\,\text{g\,mol}^{-1}) corresponds to 1.251×10−2 mol1.251 \times 10^{-2}\,\text{mol}, so RMMproduct=0.775 g1.251×10−2 mol=61.9 g mol−1\text{RMM}_{\text{product}} = \frac{0.775\,\text{g}}{1.251 \times 10^{-2}\,\text{mol}} = 61.9\,\text{g\,mol}^{-1}, matching Ti\text{Ti} (47.947.9) + N\text{N} (14.014.0).

77
New cards

What is the Bravais lattice of TiN, given d-spacings of 2.4492, 2.1207, 1.4997, 1.2789, 1.2245, 1.0604, and 0.9730 Å?

Face-centred cubic (FCC), with lines indexed to 111,200,220,311,222,400111, 200, 220, 311, 222, 400, and 331331.

78
New cards
<p>From the plot of 1/d2 vs h2 + k2 + l2 for TiN shown, what is the value of the cubic cell parameter a?</p>

From the plot of 1/d2 vs h2 + k2 + l2 for TiN shown, what is the value of the cubic cell parameter a?

a=4.244 A˚a = 4.244\,\text{Å}, determined from the gradient 1/a2=0.0555 A˚−21/a^2 = 0.0555\,\text{Å}^{-2}.

79
New cards

How many formula units of TiN are contained in its unit cell if its density is 5.39 g cm-3 and a = 4.244 Å?

Z=4Z = 4 formula units per unit cell (cell volume=7.644×10−29 m3\text{cell volume} = 7.644 \times 10^{-29}\,\text{m}^3, cell mass = 4.12×10−22 g4.12 \times 10^{-22}\,\text{g}, mass of one TiN\text{TiN} unit = 1.027×10−22 g1.027 \times 10^{-22}\,\text{g}).

80
New cards
<p>What crystal structure does TiN adopt, and why is it preferred over zinc blende?</p>

What crystal structure does TiN adopt, and why is it preferred over zinc blende?

Rock Salt structure (shown); titanium cations are formally Ti3+\text{Ti}^{3+} (d1d^1), gaining greater crystal field stabilization energy (CFSE) in octahedral coordination than in tetrahedral coordination.

81
New cards
<p>What crystal structure is shown in this unit cell diagram?</p>

What crystal structure is shown in this unit cell diagram?

The Zinc Blende (sphalerite) structure, featuring a face-centred cubic array of one element with the other occupying half of the tetrahedral holes.

82
New cards
<p>What d-orbital splitting diagram represents Ti3+ (d1) in the octahedral coordination of the rock salt structure?</p>

What d-orbital splitting diagram represents Ti3+ (d1) in the octahedral coordination of the rock salt structure?

An octahedral crystal field splitting with an electron occupying the lower t2gt_{2g} level (t2g1eg0t_{2g}^1 e_g^0), yielding an octahedral stabilization of $$\frac{2}{5}\Delta_O$.

83
New cards
<p>What d-orbital splitting diagram represents Ti3+ (d1) in the tetrahedral coordination of a zinc blende structure?</p>

What d-orbital splitting diagram represents Ti3+ (d1) in the tetrahedral coordination of a zinc blende structure?

A tetrahedral crystal field splitting with the single electron in the lower ee level (e1t20e^1 t_2^0), providing a smaller stabilization of 35ΔT\frac{3}{5}\Delta_T.

84
New cards

What is the Bravais lattice of metallic copper given d-spacings of 208.8, 180.8, and 127.8 pm?

Face-centred cubic (FCC), with lines indexed to 111111, 200200, and 220220.

85
New cards
<p>From the plot of 1/d2 vs h2 + k2 + l2 shown for copper, what is the derived lattice parameter a0?</p>

From the plot of 1/d2 vs h2 + k2 + l2 shown for copper, what is the derived lattice parameter a0?

a0=361.38 pma_0 = 361.38\,\text{pm}, derived from the gradient 7.657×10−6 pm−2=1/a027.657 \times 10^{-6}\,\text{pm}^{-2} = 1/a_0^2.

86
New cards

What is the nearest Cu-Cu distance in metallic copper with a0 = 361.38 pm?

a02=255.5 pm\frac{a_0}{\sqrt{2}} = 255.5\,\text{pm}, consistent with twice the atomic radius of copper (≈130 pm\approx 130\,\text{pm}).

87
New cards

What is the Bravais lattice of Cu3Au annealed at 350 °C, given d-spacings of 374.8, 265.0, 216.4, 187.4, 167.6, 153.0, and 132.5 pm?

Primitive cubic, because reflections correspond to n=1,2,3,4,5,6,8n = 1, 2, 3, 4, 5, 6, 8 (100,110,111,200,210,211,220100, 110, 111, 200, 210, 211, 220) without systematic absences.

88
New cards
<p>From the plot of 1/d2 vs h2 + k2 + l2 shown for Cu3Au, what is the derived lattice parameter a0?</p>

From the plot of 1/d2 vs h2 + k2 + l2 shown for Cu3Au, what is the derived lattice parameter a0?

a0=374.79 pma_0 = 374.79\,\text{pm}, calculated from the gradient 7.119×10−6 pm−2=1/a027.119 \times 10^{-6}\,\text{pm}^{-2} = 1/a_0^2.

89
New cards
<p>What structure is represented in this unit cell of ordered Cu3Au?</p>

What structure is represented in this unit cell of ordered Cu3Au?

An ordered primitive cubic structure with gold atoms (blue) at the cell corners and copper atoms (red) occupying the face centres.

90
New cards

Why is the ordered Cu3Au structure classified as primitive cubic despite its similarity to an FCC cell?

Because corner sites and face-centre sites are occupied by different atoms (Au\text{Au} vs Cu\text{Cu}), making them crystallographically non-equivalent and destroying face-centring translational symmetry.

91
New cards

At what temperature does Cu3Au undergo an order-disorder phase transition?

385 ∘C385\,^\circ\text{C}.

92
New cards

Why does Cu3Au annealed at 500 °C and quenched display only three powder reflections with d > 130 pm (111, 200, 220)?

Above 385 ∘C385\,^\circ\text{C}, the Cu\text{Cu} and Au\text{Au} atoms randomize over all positions; on average each site is identical (75% Cu,25% Au75\%\,\text{Cu}, 25\%\,\text{Au}), converting the symmetry to true face-centred cubic.

93
New cards
<p>What average number of electrons sits at each lattice site in disordered Cu3Au, as depicted in this model?</p>

What average number of electrons sits at each lattice site in disordered Cu3Au, as depicted in this model?

41.5 e−41.5\,e^-, calculated as (0.75×29)+(0.25×79)(0.75 \times 29) + (0.25 \times 79).

94
New cards

How is the entropy change of 11.5 J K-1 mol-1 for the Cu3Au phase transition explained using Boltzmann's formula?

ΔS=Rln⁡(W)=8.3 J K−1mol−1×ln⁡(4)=11.5 J K−1mol−1\Delta S = R\ln(W) = 8.3\,\text{J\,K}^{-1}\text{mol}^{-1} \times \ln(4) = 11.5\,\text{J\,K}^{-1}\text{mol}^{-1}, where W=4W = 4 represents the number of equivalent arrangements of gold across the four sites.

95
New cards
<p>From the plot of 1/d2 vs h2 + k2 + l2 shown for CsCl, what is the lattice type and lattice parameter?</p>

From the plot of 1/d2 vs h2 + k2 + l2 shown for CsCl, what is the lattice type and lattice parameter?

Primitive cubic, with a0=4.122 A˚a_0 = 4.122\,\text{Å}, from gradient 0.05884 A˚−2=1/a020.05884\,\text{Å}^{-2} = 1/a_0^2.

96
New cards

What is the Cs-Cl distance in CsCl with a0 = 4.122 Å, and how does it compare to the sum of ionic radii?

32a0=3.56 A˚\frac{\sqrt{3}}{2}a_0 = 3.56\,\text{Å}, matching the sum of ionic radii (rCs+=1.88 A˚r_{\text{Cs}^+} = 1.88\,\text{Å} and rCl−=1.67 A˚r_{\text{Cl}^-} = 1.67\,\text{Å}).

97
New cards

What apparent lattice type is observed in the powder XRD pattern of CsI, and what is its lattice parameter a0?

Body-centred cubic (BCC), with a0=4.569 A˚a_0 = 4.569\,\text{Å}.

98
New cards
<p>Why does CsI appear body-centred cubic by X-ray diffraction when its actual structure is the primitive CsCl type?</p>

Why does CsI appear body-centred cubic by X-ray diffraction when its actual structure is the primitive CsCl type?

Cs+\text{Cs}^+ (54 e−54\,e^-) and I−\text{I}^- (54 e−54\,e^-) are isoelectronic; because their X-ray scattering factors are equal, the corner and body-centre electron densities are indistinguishable, causing all odd (h+k+l)(h+k+l) reflections to cancel out.

99
New cards

Name five other ionic compounds that contain isoelectronic ions and show apparent centring anomalies in XRD.

LiH\text{LiH}, MgO\text{MgO}, KCl\text{KCl}, NaF\text{NaF}, and RbBr\text{RbBr}.

100
New cards
<p>What phase percentages are represented in this multicomponent titanium dioxide powder XRD pattern?</p>

What phase percentages are represented in this multicomponent titanium dioxide powder XRD pattern?

24%24\% Rutile, 36%36\% Brookite, and 40%40\% Anatase.