1/8
Looks like no tags are added yet.
What is the dilution equation used for? M1V1 = M2V2
Used to calculate the exact volume of a concentrated stock solution (M1) needed to prepare a diluted standard solution (M2) of a specific final volume (V2)
Why is a Volumetric Flask used during this and how do you prepare it
Purpose: to hold a precise total volume when filled right to the calibration mark on the neck
Preparation steps
transfer the solid solute into the flask and dissolve it in a small amount of solvent
carefully add liquid drop-by-drop using a transfer pipette until the bottom of the meniscus rests on the calibration line
Cap the flask and invert to mix
What is beer’s law and what happens to absorbance if you double the concentration of a solution?
Beer’s law is the linear proportionality between a solutions concentration and its light absorption (as concentration increases, absorbances increases)
A higher concentration of substance in a liquid means less light gets through and more light is absorbed (increasing absorbance)
What is beer’s law and its relation to its linear trendline (on graph)?
A = εlc
A = absorbance
ε = molar absorptivity (1 / (M cm))
l = path length (usually 1 cm)
c = concentration (usually in M)
y = mx
y = absorbance
m = εl
A steeper slope means the substance is more sensitive to light absorption (it absorbs more light per unit of concentration)
x = concentration (what we want to find)
y-intercept is ideally 0 when a blank is used
What does wavelength of max absorbance (lamba max) mean
the specific wavelength of light (nm) where the substance absorbs the most light
If a solution absorbs light at a specific lambda max corresponding to green light, what color does the solution appear in your eyes and why?
it appears the complementary color (red) because those absorbed wavelengths pass through the solution to your eyes instead of being blocked.
What does an absorbance reading at lambda max measure and what are its units?
Measures how much light is absorbed by the sample at that peak wavelength
unitless
Difference between lambda max and absorbance
lambda max = which color/wavelength is absorbed best (the location on the spectrum)
absorbance at lambda max = how much light is being blocked or absorbed at the peak (which is what you plug in to beer’s law to find concentration)
On a graph…,
wavelength in nm on x axis
absorbance on y axis