1/24
Looks like no tags are added yet.
density
density is constant for liquids and solids
If you double the volume, you double the mass, so density stays the same
density can vary slightly with temperature and pressure
density of a gas
much lower and
varies greatly with temperature and pressure
specific gravity of a substance
is the ratio of its density to the density of water at 4°C
dimensionless quantity
1m3
= 1000 Liters
0.001 m3 = 1L (move the decimal 3 places)
1000 cm
= 1L
264.172 gallons
= 1m3
at sea level
the atmosphere exerts a pressure of 101,300 Pa
1 atmosphere (atm)
most pressures on earth
at least 100,000Pa
fluid pressure
Objects immersed in a fluid feel pressure on all sides from molecules colliding with the surface
The pressure acts perpendicular to the surface
forces are perpendicular because the other forces cancel out
pressure inc
with inc depth
pressure is due to all the weight of the fluid above you
air
low density and high pressure
pressure notes
Assumes the fluid is incompressible → rho is constant
Works well for liquids
Only works for gases if h is small
The area does not matter, only the height of fluid above it (or how deep below the surface)
If the surface of the fluid is open to air, you need to add air pressure
absolute pressure
= Gauge pressure + atmospheric pressure
measured relative to a vacuum
It includes atmospheric pressure
guage pressure
is the difference from atmospheric pressure
It is usually the pressure measured by a gauge (i.e. tire pressure)
In a fluid, it is the fluid pressure, ρgh
shape doesn’t matter
only depth
pressure is the same along a horizontal line
if both ends are open, fluid will be at the same height on both sides
the width of the openings don’t matter
every 10m of under water
adds almost one atmosphere of pressure
ex: pressure 30 meters under water, fluid pressure would be almost 3 atm, absolute pressure would be 4 atmospheres or about 400,000 Pa
Pascals principle
Any change in the pressure applied to a completely enclosed fluid is
transmitted undiminished to all parts of the fluid and the enclosing walls
Pressure at any point along a horizontal line is the same
Hydraulic Lift
balance a heavy weight using a small force
Can support a heavy object with a small force if A2/A1 is large enough
Volume displaced is the same on both sides
The work is the same on both sides! You trade force for distance
barometer
Pressure from mercury in tube equals pressure of atmosphere
manometer
One end of the U-shaped tube is open to the atmosphere
The other end is connected to the pressure to be measured
If P in the system is greater than atmospheric pressure, h is positive
If less, then h is negative
buoyancy
Since pressure depends on depth, the pressure on an object immersed in a fluid is not the same on the top and bottom
p is density of fluid, not the object!
Archimedes Principle
Notice that if V is the volume of water displaced, then Fb = pgV is the weight of water displaced
Archimedes’ Principle: The magnitude of the buoyant force always equals the weight of the fluid displaced by the object
Displaced fluid
Sometimes it’s hard to find the volume of an object
We can find the volume of the displaced fluid instead
If the fluid in a container rises a distance h, then V = A h
𝑉 = 𝐴ℎ = 𝜋𝑟2ℎ
apparent weight
The scale measures the tension force, rather than the actual weight
You can use the density to identify a material
floating up
Object floats upward if: Fb > Fg, p fluid, Vg > mg, p fluidV > p object, p fluid > p object