1/7
Looks like no tags are added yet.
Astigmatism
A refractive error in which the eye has different refractive powers in its two principal meridians. The meridians are always 90∘ apart but can lie at any orientation, and the condition is corrected with cylindrical lenses.
Finding the principal meridians in retinoscopy
Neutralising the most hypermetropic meridian first
The most hypermetropic meridian is identified by the slowest 'with' movement or fastest 'against' movement of the reflex. It is neutralised first because UK prescriptions are usually written in minus cylinder form.
Complete order of astigmatic retinoscopy
Cylinder axis placement for the second meridian
When neutralising the second meridian, use minus cylinders with the cylinder axis aligned to the retinoscope streak. Continue until neutrality is reached and verify by reversal.
Recording an astigmatic retinoscopy result
Written as Sphere / Cylinder × Axis, with the sphere first, a '/' separator, the cylinder power, then '×' and the axis. Example: +3.00DS/−1.00DC×90
Types of astigmatism by axis
With-the-rule astigmatism has an axis within 15∘ of 180∘. Against-the-rule astigmatism has an axis within 15∘ of 90∘. Oblique astigmatism has an axis not within 15∘ of horizontal or vertical.
Common retinoscopy problems and solutions
Scissor reflex: often caused by aberrations such as keratoconus; use larger lens steps or increase illumination. Large pupils: peripheral reflex affected by spherical aberration; concentrate on the central reflex only. Poor accommodation control: reflex changes rapidly; use a distant non-accommodative target or cyclopentolate in children. Strabismus: may need to occlude the good eye. Elderly patients: small pupils or media opacities; work closer, use a larger aperture, or dilate if necessary.