CJ 110 | Objectives: Tread Impressions

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/13

encourage image

There's no tags or description

Looks like no tags are added yet.

14 Terms

1
New cards

Describe the three types of shoeprints found at crime scenes.

  • Visible 2D print: Dirt or other material is picked up by a shoe and deposited onto a flat, hard surface.

  • Visible 3D print: A shoe leaves an impression in soft material, such as dirt or snow.

  • Latent 2D print: A barely visible print made from dry dust, residue, moisture, or a faint impression.


2
New cards

Explain why all shoeprints should be documented, even if the prints are suspected from coming from same shoe.

Different shoes will leave behind prints of different sizes and patterns. Most suspects wear shoes and can lead to more evidence. Location of prints can refute alibis.

3
New cards

Describe how a barely visible shoeprint is located.

Darken the room and shine a bright light at a low angle across the surface. This can make some prints visible. The scene should be controlled to prevent the evidence from being destroyed. (Pages 6–7)

4
New cards

Describe how a 2D shoeprint can be documented and collected.

  • Record the location of the print.

  • Take an examination-quality photograph.

  • Include a ruler or scale so the image can be enlarged to the actual size.

  • If the print is on a removable object, such as paper or glass, remove the object if possible. (Page 7)


5
New cards

Describe how a shoeprint is collected using electrostatic lift.

An electrostatic charge lifts light, dry materials from a surface onto black film. The film provides greater contrast, allowing the print to be photographed and preserved as evidence. (Page 8)

6
New cards

Describe how a 3D shoeprint is documented and collected.

  • Photograph the impression before casting.

  • Make a cast using dental stone, which captures detail and is durable.

  • For prints in snow, spray colored wax to highlight the impression for photography and help prevent the snow from melting during casting. (Page 9)


7
New cards

Describe the class characteristics and individual characteristics of shoes.

  • Class characteristics: Pattern and size. These characteristics help investigators determine whether a shoe could have made a print or eliminate a shoe that does not match.

  • Individual characteristics: Cuts, rocks, and wear marks that are unique to a specific shoe. These can help identify the exact shoe. (Pages 11–12)


8
New cards

Explain how the individual characteristics of shoes can change over time.

Individual characteristics can change as a shoe becomes more worn or damaged. These changes are generally one-way: a shoe can develop additional wear or damage, but it does not repair itself. (Page 13)

9
New cards

Describe the class characteristics and individual characteristics of shoes.

This question is repeated. See Question 6: class characteristics include pattern and size, while individual characteristics include unique cuts, rocks, and wear marks. (Pages 11–12)

10
New cards

Explain why a car with replacement tires may be easier to identify than a car with OE tires.

  • Original equipment (OE) tires come with new cars, and thousands of cars may have the same tire brand and size.

  • Replacement tires are purchased when old tires wear out and are usually different from the original tires.

Replacement tires may therefore provide more distinguishing information when investigators compare tire impressions. (Page 15)

11
New cards

Explain how a tread wear indicator can e used as a class characteristic of tires

A tread wear indicator is a raised bar beneath the tire's tread pattern. It becomes visible as the tire wears. Its appearance and position can help investigators compare tire impressions and assess shared tread characteristics. (Page 15)

12
New cards

Describe the following terms: wheelbase, track width, turning diameter

  • Wheelbase: The distance from the center of the front wheels to the center of the back wheels. (Page 16)

  • Track width: The distance from the center of the right tire to the center of the left tire. The front and rear track widths are not always the same. (Page 16)

  • Turning diameter: The diameter of the circle made when the wheels are turned fully. (Page 17)


13
New cards

Explain how a 2D and 3D tire impression should be documented and collected.

2D tire impressions:

  • Photograph the tire track and record its location.

  • Take examination-quality photographs with a ruler or scale.

  • Take overlapping photographs of the entire track because the tread pattern varies along its length.

3D tire impressions:

  • Photograph the impression before collecting it.

  • Make a cast using dental stone.

  • Cast long sections of the impression, approximately three feet long. (Pages 18–19)


14
New cards

Describe the class characteristics and individual characteristics of tire impressions.

  • Class characteristics: Tire size, tread design, and some wear marks. These can help investigators suggest a possible tire or eliminate a tire that does not match.

  • Individual characteristics: Unique cuts, rocks, and wear marks that can help identify a specific tire.

When class characteristics match, investigators can estimate how rare the pattern is by using databases or contacting manufacturers. Individual characteristics can provide more specific identifying information, although they may change over time. (Pages 19–20)