Archaeology Examination: Lithic Technology, Ceramic Morphology, Petrography & Pyrotechnology

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/19

flashcard set

Earn XP

Description and Tags

Comprehensive vocabulary flashcards covering lithic technology, ceramic morphology, chaîne opératoire, petrography, microwear, and pyrotechnology from the Module 3 short answer examination.

20 Terms

1
New cards

Chaîne opératoire

Chaine operatiore in archaeology created by Andre Lehroi Gourhan is the sequence of manufacturing the artifact and it will help archaeologist understand how the artifact is used and can help define the context on how it is used.

2
New cards

Ceramic chaîne opératoire (Five general stages)

  1. Treatment and transformation of raw material

  2. Form and shape

  3. Decoration

  4. Fire and cool

  5. Utilization and discard.


3
New cards

How does the chaîne opératoire framework apply to stone tool technology and tool-kit management?

The chaine operatoire framework is used to apply stone tool technology to understand the stone tool making from different stages rather than by the final product

4
New cards

How is petrographic analysis performed on ceramics, and what primary information does it provide to archaeologists?

You take the a thin slice from the ceramic so light passes through it and can be used under a microscope. It provides the provenience studies or the specific technique of making the pot

5
New cards
<p class="p1">How does X-ray radiography reveal the manufacturing method of a ceramic vessel?</p>

How does X-ray radiography reveal the manufacturing method of a ceramic vessel?

X-ray radioology could reveal the method on how the person formed the ceramic, whether it was using coils, the slab method, or from a wheel.

6
New cards

 If an excavated ceramic sherd exhibits a dark (gray or black) core when broken in cross-section, what does this reveal about its firing conditions?

If the ceramic sherd is dark (gray or black) core broken in cross-section it means that the firing temperature was too low to oxidize the clay fully and the duration of the firing is insufficient which also means it was fired in an open kiln

7
New cards

What does a vitrified or glazed surface on a ceramic sherd reveal about the firing

temperature and the type of firing structure used?

The melting and fusion of ceramic constituents into a glassy, impermeable matrix at high firing temperatures (typically exceeding 900–1000∘C900\text{--}1000^\circ\text{C}), characteristic of an enclosed kiln rather than an open pit fire.

8
New cards
<p class="p1">What internal structural pattern visible under X-ray radiography indicates that a pot was made using a potter's wheel?</p>

What internal structural pattern visible under X-ray radiography indicates that a pot was made using a potter's wheel?

An internal structural pattern visible under X-ray radiography characterized by spiral or diagonal orientations of pores and inclusions and uniform horizontal wall ridges produced by rotational kinetic energy.

9
New cards

Define ceramic paste and explain the purpose of adding temper to the raw clay matrix.

Cermaic paste is a mixture of raw clay with clay temper to help shape the ceramic it holds the clay together and helps with the structure of the vessel and prevent the pot from breaking apart when firing

10
New cards

What is retouch in stone tool manufacturing, and what function(s) can it serve?

Retouch in stone tool making is where you shape the tool into a specific form by secondary flaking the edge of the tool and can be used to maintain the stone tool and keep the use fresh

11
New cards

What is the process of refitting in lithic analysis, and what valuable information does it provide about stone tool manufacture?

Refitting will allow the archaeologist to retrace the chaine operatoire and understand how the stone tools were made and used

12
New cards

How does micro-wear analysis assist in identifying stone tool function?

Microwear analysis when comboned with refitting can paint a picture of prehistoric life of the stone tools.

13
New cards

What is microdebitage, and by what archaeological technique is it typically recovered from excavated soil?

Microdebitage are tiny flakes of rocks that are less than a milimeter which is formed during the process of making stone tools. It is recovered by wet sieving.

14
New cards

Compare the mechanics of building a vessel using the coil technique versus the slab technique.

Coil method is where the person creates the clay into a ball and rolls it out into a coil and then place the coil around the base of the ceramic vase. A slab is where you flatten the clay into a rectangle/slab and then take the slab and wrap it around the base of the ceramic vase

15
New cards

Explain the morphological difference between simple rims and compound rims on ceramic vessels.

Simple rims are a continrous a continous, unbroken from the vessel wall and a compound rim is where the shape changes direction of the ceramic vessel.

16
New cards

Identify four distinct rim lip profiles categorized in ceramic morphology studies.

Four recognized morphological profile categories of the terminal edge of a ceramic rim: rounded, flat (squared), tapered (beveled), and thickened (everted or beaded).

17
New cards
<p>Two-piece mold ceramic production (Huaca Sialupe, Peru)</p>

Two-piece mold ceramic production (Huaca Sialupe, Peru)

This ceramic was made by using a mold to help shape the vessel and then joining the two halves together

18
New cards

Vessel morphology zones

The anatomical divisions of a ceramic vessel profile, comprising the lip and rim, neck, shoulder (point of maximum diameter change), main body, and base.

19
New cards

How do archaeologists measure the rim diameter of a fragmented ceramic sherd using a rim chart template?

Match the curve of the broken piece against the rim chart template and then the diameter is measured in centimeters

20
New cards

What is burnishing surface treatment on ceramics, and what funcSonal benefit can it provide?

Burnishing is used on the surface of the ceramics to make the pottery look shiny and also makes the surface smooth