1/25
Looks like no tags are added yet.
What are the 4 magnetic materials
Iron
nickel
cobalt
steel
What are magnetic materials
Magnetic materials are those that are attracted or repelled by a magnet
2 properties of magnetically soft materials
easy to magnetise
easily lose their magnetism
2 properties of hard magnetic materials
difficult to magnetise
do not easily loose their magnetism
What are permanent magnets
Generally made of steel, They have all of their domains aligned so they constantly pull in the same direction and will therefore pull any magnetic materials towards them
Magnetic materials act like a temporary magnet when… this is called…..
brought near a magnet causing their domains to align temporarily
Induced magnetism
Describe one method to force the electrons to line up (Iron nail)
Stoke the nail with the magnet in a circular motion so that the domains of the iron nail begin to align
it will become a WEAK magnet
Since magnetism is a consequence of the motion of electrons..
it follows that anything that has an electrical current running through it has a magnetic field surrounding it
What is the law of magnetism
Opposite poles attract, like poles repel
Describe and explain 3 ways to demagnetise a magnet
To demagnetise a magnet you need to jumble the domains again
do this by:
Disrupting them mechanically (e.g. hit with a hammer)
heat it up (extra vibrations cause the domains to be disturbed)
Place it in a strong varying magnetic field
What 2 planets have no magnetic field
Venus and Mars
Why is the earths magnetic field important
It acts like a shield deflecting harmful charged particles that come from the sun
at the poles there is a “way in” where charged particles from the sun interact with the atmosphere causing their aurorae
magnetic field lines are drawn so they travel…
away from the north and towards the south
ANTS
Explain how to investigate the shape of magnetic fields using Iron fillings
Place a card over the magnet (using 2 books)
sprinkle the card with iron fillings
tap the card - to reveal magnetic fields lines
Explain how to investigate the shape of magnetic fields using small compasses
Place small compasses around the magnet
mark where each arrow points w/ a dot
join up the dots to form field lines
What is the difference between investigating the shape of magnetic field lines using iron fillings vs compasses
Iron fillings only reveal shape while compasses also show direction of field lines (N → S)
what do you need to remember when sketching magnetic fields lines
all lines need arrows, N→S
field lines must not cross each other
field lines = closest at poles and strongest
What are uniform magnetic fields
regions in which the field stays a constant strength and in a constant direction
How do you know a magnetic field is uniform
it has parallel, evenly spaced lines all in a constant direction
What is the right-hand grip rule
If you point you thumb in direction of current + to -, then your fingers curl in the direction of the field lines
2 ways to increase the strength of the magnetic field
Increase current
increase length of wire within magnetic field
give 3 ways the magnetic field surrounding a SOLENOID can be increased (solenoid = coil of wire)
increase current
increase number of turns in the coil
add an iron core
Why is the core of a solenoid iron and not steel
iron is a soft magnetic material meaning it can easily gain and lose magnetism, can be switched on and off

Describe how an electric bell makes use of an electromagnet
When switch (bell push) is pressed the circuit is complete
This causes the soft iron core to become magnetised attracting the iron armature (which is attached to the striker)
This causes the striker to hit the gong/ bell and at the same time a gap is made at the contact/ adjusting screws
This means the circuit is again incomplete so current stops
This means the spring pulls the armature back up to its original position
the circuit is again complete and the process repeats
What is the purpose of a circuit breaker
It cuts off the circuit if the current becomes to high

Describe how an electromagnet is used in a circuit breaker
If the current is too high
the electromagnet becomes strong enough to pull iron armature out so the contacts open breaking the circuit
once the problem is corrected the armature is repositioned by pressing the reset button