1/19
Looks like no tags are added yet.
What is seasoning?
• The controlled removal of excess moisture from timber
Why is seasoning necessary?
• Improves dimensional stability
• Reduces shrinkage and warping
• Improves workability
• Reduces risk of fungal decay
What are the four seasoning methods?
• Air seasoning
• Kiln seasoning
• Combined seasoning
• Microwave seasoning
What is air seasoning?
• Timber is stacked with spacers
• Air circulates around boards
• Moisture gradually evaporates
What are the advantages of air seasoning?
• Relatively inexpensive
• Low energy requirements
• Simple process
What are the disadvantages of air seasoning?
• Slow
• Weather-dependent
• Less control over final moisture content
What is kiln seasoning?
• Timber is dried in a controlled chamber
• Temperature, humidity and airflow are regulated
What are the advantages of kiln seasoning?
• Faster drying
• More consistent results
• Better control over moisture content
What are the disadvantages of kiln seasoning?
• Higher cost
• Energy consumption
• Incorrect conditions may cause defects
What is combined seasoning?
• A combination of air and kiln seasoning
• Often involves partial air drying followed by controlled kiln drying
What is microwave seasoning?
• Uses electromagnetic energy to heat moisture within timber
• Encourages moisture evaporation
What is free water?
• Water found in the cavities of timber cells
• Removed first during drying
• Its removal causes relatively little shrinkage
What is bound water?
• Water held within timber cell walls
• Its removal causes cell wall contraction and timber shrinkage
What is the fibre saturation point?
• The approximate moisture content at which free water has been removed but cell walls remain saturated with bound water
• Often around 30%, depending on species
What is collapsing?
• Excessive shrinkage of the timber's cellular structure during drying
What is warping?
• General distortion of the original shape of timber
What is cupping?
• Curving across the width of a board
What is twisting?
• Distortion where the corners of a board no longer lie in the same plane
What is splitting?
• Separation of timber fibres creating cracks
What is the main cause of seasoning defects?
• Uneven drying
• Unequal shrinkage throughout the timber
• Internal stresses