west test 5 assignments

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/169

encourage image

There's no tags or description

Looks like no tags are added yet.

170 Terms

1
New cards

What is meant by technique selection?

Factors used to produce a radiograph.

2
New cards

What are the four prime factors of radiographic technique?

Distance, mA, time, and kVp.

3
New cards

How many volts are in 1 kV?

1,000 volts.

4
New cards

What does mAs control on the film?

Density.

5
New cards

How can you make a radiograph darker?

Increase mAs.

6
New cards

How can you make a radiograph lighter?

Decrease mAs.

7
New cards

Which prime factor controls filament temperature?

mA, the current through the filament in the tube.

8
New cards

What is the minimum temperature for thermionic emission?

2,200 °C.

9
New cards

How many seconds are in 100 ms?

0.1 second.

10
New cards

What is mA multiplied by exposure time in seconds?

mAs.

11
New cards

How do you find exposure time when mA and mAs are given?

Time = mAs ÷ mA.

12
New cards

How do you find mA when exposure time and mAs are given?

mA = mAs ÷ time.

13
New cards

What does kVp stand for?

Kilovolt peak.

14
New cards

What governs X-ray penetration of a body part?

kVp.

15
New cards

What determines the kV used for a body part?

Thickness.

16
New cards

Which prime factor controls the scale of radiographic contrast?

kVp.

17
New cards

What does SID stand for?

Source-to-image receptor distance.

18
New cards

Which two radiologic exams use a 72-inch SID?

Chest and cross-table lateral cervical spine.

19
New cards

Which two radiologic exams use a 40-inch SID?

Hand and foot examinations.

20
New cards

What is a teleroentgenogram?

A radiograph taken at a 72-inch SID.

21
New cards

How do radiopaque and radiolucent areas differ?

Radiopaque areas stop X-rays and appear white; radiolucent areas transmit X-rays and appear dark.

22
New cards

How do areas of bone appear on a radiograph?

White.

23
New cards

What kV values are recommended for the skull, extremities, abdomen, and PA chest with grid?

Skull: 80; extremities: 55-70; abdomen: 70-80; PA chest with grid: 110.

24
New cards

What are the four qualities of a radiograph?

Density, contrast, recorded detail, and distortion.

25
New cards

What describes radiographic blackening, and what primarily controls it?

Density; mAs is the primary control.

26
New cards

What describes visible density differences between adjacent structures, and what primarily controls it?

Contrast; kVp is the primary control.

27
New cards

What are the two types of distortion?

Shape and size distortion.

28
New cards

What is recorded detail?

How accurately the object is recorded.

29
New cards

What is the range of exposure factors that produces a diagnostic radiograph called?

Exposure latitude.

30
New cards

What two qualities must be balanced for a good-quality radiograph?

Visibility and sharpness.

31
New cards

What is radiation exiting the tube outside the window called?

Leakage radiation.

32
New cards

What is the exit beam, and what information does it carry?

The remnant beam; it carries patient information to the image receptor.

33
New cards

What scale of contrast results from changing from nonscreen to screen exposures?

Short scale / high contrast.

34
New cards

How much does contrast change when switching from a slow-speed to a higher-speed screen?

Little.

35
New cards

How do resolution and recorded detail change when switching to a higher-speed screen?

Both become worse.

36
New cards

Which option produces the greatest resolution?

A cardboard holder.

37
New cards

Which screen produces the highest contrast?

A high-speed screen.

38
New cards

Which screen helps alleviate motion?

A high-speed screen.

39
New cards

How should technique change when converting from high-speed to slow screens?

Increase mAs fourfold to maintain similar film density.

40
New cards

How should technique change when converting from par screens to high-speed screens?

Halve mAs to maintain similar film density.

41
New cards

How should technique change when converting from screen to cardboard technique?

Increase technique to maintain similar film density.

42
New cards

What type of kVp produces more high-energy x-rays?

High kVp.

43
New cards

How many volts equal 50 kVp?

50,000 volts.

44
New cards

Which technique factor has the greatest effect on contrast?

kVp.

45
New cards

Which technique factor has the greatest effect on density?

mAs.

46
New cards

Which technique factor has the greatest effect on scatter production?

kVp.

47
New cards

What improves recorded detail according to the technique guide?

A long SID.

48
New cards

What cannot be selected when using a falling load generator?

mA. This question was marked "omit" on the key.

49
New cards

What SID is recommended for extremities?

40 inches.

50
New cards

What SID is recommended for a chest x-ray?

72 inches.

51
New cards

What SID is recommended for a cross-table lateral cervical spine?

72 inches.

52
New cards

What SID is recommended for a KUB?

40 inches.

53
New cards

What happens to radiation intensity when SID is doubled?

It decreases to one-quarter of the original intensity.

54
New cards

How does patient absorption change as kVp increases?

It decreases.

55
New cards

How does higher kVp affect the scale of contrast?

It produces a long scale of contrast.

56
New cards

How does higher kVp affect the recorded density range?

It produces a broad range with many grays.

57
New cards

How does higher kVp affect scatter production?

It increases scatter production.

58
New cards

How does higher kVp affect patient radiation dose?

It decreases patient dose.

59
New cards

How does higher kVp affect the number of high-energy x-rays produced?

It increases their number.

60
New cards

How does exposure time change as screen speed increases?

It decreases.

61
New cards

What is the 15% rule?

Increasing kV by 15% doubles density.

62
New cards

What two components comprise radiographic contrast?

Film contrast and subject contrast.

63
New cards

How can magnification be minimized?

Use the shortest OID and longest SID.

64
New cards

How much scatter can a typical grid absorb?

90%.

65
New cards

Where is a grid positioned?

Between the patient and image receptor.

66
New cards

What is meant by a high-quality radiograph?

A variation in densities that allows details to be visualized.

67
New cards

What is the advantage of using intensifying screens?

They reduce patient dose and allow lower mAs settings.

68
New cards

What focal spot size produces better recorded detail?

A small focal spot.

69
New cards

What do technique charts generally specify?

kVp, mAs, and patient thickness.

70
New cards

Who creates departmental technique charts?

Radiologists and technologists in the department.

71
New cards

What is fixed in a variable-kVp technique chart?

mAs.

72
New cards

What varies in a fixed-kVp technique chart?

mAs varies according to patient thickness.

73
New cards

What is a disadvantage of a fixed-kVp technique chart?

Increased scatter production.

74
New cards

Why are technique charts used?

To obtain the best image the first time.

75
New cards

What are the primary exposure variables?

mA, exposure time, and kVp.

76
New cards

What is the advantage of using short exposure times?

Reduced patient motion blurring.

77
New cards

What is anatomically programmed radiography?

A computerized system selects exposure settings for various exams.

78
New cards

What factors must the technologist consider with automated exposure systems?

Patient pathology, size, and positioning.

79
New cards

How many seconds are in 35 milliseconds?

0.035 seconds.

80
New cards

What is the current through the filament in the X-ray tube?

mA (milliamperage).

81
New cards

What is the grid factor formula?

G₂ = G₁ × (mAs₂ ÷ mAs₁).

82
New cards

What is the grid factor when no grid is used?

1.

83
New cards

What is the grid factor for a 5:1 grid?

2.

84
New cards

What is the grid factor for a 6:1 grid?

3.

85
New cards

What is the grid factor for an 8:1 grid?

4.

86
New cards

What is the grid factor for a 10:1 or 12:1 grid?

5.

87
New cards

What is the grid factor for a 16:1 grid?

6.

88
New cards

What type of relationship exists between mA and time?

Inverse (I).

89
New cards

What type of relationship exists between mAs and density?

Direct (D).

90
New cards

What type of relationship exists between distance and exposure rate?

Inverse (I).

91
New cards

What type of relationship exists between distance and density?

Inverse (I).

92
New cards

What type of relationship exists between kV and contrast scale?

Direct (D): increasing kV produces longer-scale contrast.

93
New cards

What type of relationship exists between distance and beam width?

Direct (D).

94
New cards

What type of relationship exists between distance and magnification?

Inverse (I).

95
New cards

What type of relationship exists between EFSS and recorded detail?

Inverse (I).

96
New cards

What type of relationship exists between kV and absorbed dose?

Direct (D).

97
New cards

What type of relationship exists between kV and wavelength?

Inverse (I).

98
New cards

Referring to the H&D diagram on Page 1, which film displays greater latitude?

Film B.

99
New cards

Referring to the H&D diagram on Page 1, which film requires less exposure to produce a density of 2.0?

Film A.

100
New cards

Referring to the H&D diagram on Page 1, which film displays the highest scale of contrast?

Film B.