1/9
Vocabulary flashcards covering the components, electrical characteristics, and noise cancellation mechanics of balanced audio cables.
Balanced Audio Cable
An audio cable composed of three main components—conductors (internal wires or cores) and shielding—working together to carry audio signals and protect against electromagnetic and other noise interference over long distances.
Conductors (Cores)
The internal wires within an audio cable that carry the electrical audio signal.
Shielding
The protective component of an audio cable that helps protect the integrity of the information passing through the conductors from external electromagnetic and noise interference.
Line Level
The required signal level that an audio signal must reach via amplification before it can successfully travel through an audio system.
Preamplifier (Preamp)
A device at the receiving end of a microphone cable that provides a hefty amount of amplification to boost very low voltage signals up to Line Level, which also amplifies any infiltrated cable noise.
Phase Reverse (180∘ Inversion)
The transmission technique where the signal generated by a microphone capsule is sent across two wires, with one side inverted by 180 degrees.
Differential Input Amplifier
An amplifier located at the microphone preamp input that re-inverts the inverted signal wire and then combines both signals together.
Induced Noise Cancellation
The phasing out of transmission interference that occurs because noise enters both conductors equally; upon re-inversion by the differential amplifier, the noise on one conductor cancels out the noise on the other.
Signal Recombination
The summing together of the two conductors' in-phase signals at the differential input amplifier, which slightly strengthens the original signal to compensate for losses on long cable runs.
Inherent Noise
Noise that originates directly from within the sound source or equipment itself (such as a noisy microphone), which cannot be eliminated by balanced cable cancellation.