1/57
Looks like no tags are added yet.

Faradays experiment


Magnetic flux understanding






Whenever flux changes current is produced or current is induced. So when we are going to talk about the induced current, we are going to see two aspects. So the first one is the value and the second one is direction. But for us, the very first thing which we are going to study about is direction and which was given by Lenz. And for this we are going to study about Lenz law and about the value later. We are going to study the Faraday law. And now, what the Lenz law define is due to change in flux through coil, there is induced current produced such that it opposes the cause due to which it is induced
Magnetic flux depends on the magnetic field, area, and the angle between the magnetic field and the area vector.
Magnetic field entering the surface: Negative flux.
Magnetic field leaving the surface: Positive flux.
Coil —
Coil flux ki inertia
When there is change in flux coil try to maintaintain that flux


Circular loop wale case me aur rectangular wale case me tum ek cheez bhul gai thi jb coil chahe woh rect ho circular agr rest pe hai constant area aur magnetic field ke saath aur agar usko kisi aese wire ke paas rkhe jusne constant current flow kr rha hai toh uska flux constant rehta hai aur induced current zero rehta hai


तो पहले वाले में बताऊँ कि जब हम एक दिन बताना है एरिया घट रहा है तो एरिया घट रहा है तो जो external magnetic field था वो भी घटेगा और वो घटेगा तो उसको बढ़ाना पड़ेगा। वो बढ़ाना पड़ेगा तो हम लोग को पता है कि वो जो clockwise current चल रहा है, clockwise current है तो वो चलता है क्या बोलते हैं inside magnetic field रहता है तो चलता है। मतलब हम लोग को पता चल गया कि जो B induced है वो inside वाला है। उसके बाद second वाले में ये है कि उसमें तुमको बताया गया है कि जो magnetic field है उससे दो conductor को दिखी रहा है। तो उसमें दो conductor को जोड़ दिया तो उसमें magnetic field चूंकि outside वाला magnetic field था, उसको बढ़ा रहा है। तो उसके बढ़ने से भी induced होगा current, बट flow नहीं करेगा एक coil से दूसरे coil में क्योंकि वो circular path में से loop में घूमेगा ना current इसलिए सर हमको यही बताया। आप भी यही बताएंगे। तो इसका answer होगा no current। और दूसरा बात फिर वो जो लास्ट वाला question है, उसमें ऐसा just open वाला circuit। तो circuit पहले जब close था और clockwise ही चल रहा था, हाँ clockwise ही चल रहा था क्योंकि उसमें current का direction दिखाया गया है ध्यान से देखो। और वो जो clockwise चल रहा था ना, तो clockwise चल रहा था मतलब कि magnetic field, inside magnetic field था। Inside magnetic field अचानक से zero हो गया तो मतलब inside magnetic field को बढ़ाने के लिए वो induced magnetic field coil का वो inside वाला ही होगा। और जो current induced होगा वो भी clockwise ही जाएगा

पहले वाले ग्रेस में जब की को जस्ट ओपन करना तो पहले आप तो उसमें आउटसाइड मैग्नेटिक फील्ड है और k को जैसे ही ओपन कर रहा है मैग्नेटिक फील्ड जीरो हो जा रहा है। तो induced magnetic field coil का वो आउटसाइड वाला होगा क्योंकि वो उसको मेंटेन करना चाहेगा। और दूसरा बात इसमें जो induced होगा वो आउटसाइड वाला है तो उसमें anticlockwise वाला induced current होगा coil में। और second case में जब हम key को close कर रहे हैं तो मतलब magnetic field zero तो अचानक से outside magnetic field होने लग गया। तो अब उसको zero करने के लिए वो magnetic field जो induce करेगा वो inside वाला होगा और जो current होगा वो clockwise होगा
लूप में एंडिकपाइस घूम रहा था तो इसका मतलब जो हम लोग को मैग्नेटिक फील्ड था वो आउटसाइड वाला मैग्नेटिक फील्ड था। तो जब हम लोग वायर को राइट साइड मूव करा तो उसका एरिया घटा। मतलब आउटसाइड वाला मैग्नेटिक फील्ड घटा तो आउटसाइड वाला मैग्नेटिक फील्ड को बढ़ाने के लिए आउटसाइड वाला मैग्नेटिक फील्ड को इस्तेमाल होगा और जो करंट होगा वो एंटी क्लॉकवाइज ही होगा। लेकिन उसमें पूछा है कि O पॉइंट पे क्या मैग्नेटिक फील्ड का डायरेक्शन होगा? तो वो आउटसाइड पे पर होगा मतलब पर्पेंडिकुलर टू पर्पेंडिकुलर आउटसाइड तो ये वाला ऑप्शन सही होगा

अगर उसमें वो ऐसे मतलब डायरेक्ट पेंट करता without any overlapping मतलब वो touch नहीं हो रहा है ओवरलैप तो दूसरे वाले में, केस में टच नहीं हो रहा है, वो ऐसा ऊपर से उठ के चला गया है, समझो। तो पहले वाली बीच में ऐसे direct मुझे connection बनाना है। तो उसमें same बात वही है कि जो outside magnetic field है वो बढ़ा तो वो जो induced magnetic field है वो inside वाला लगा। तो उससे clockwise current induce होगा। Clockwise current induce होने से दोनों में clockwise current induced हुआ। जैसे कि पहले वाले में से current गया उधर तो वो ऐसा कहने कि उसी direction में गया है जिस direction में small वाले coil में जा रहा था। तो दोनों add हो गया। तो net current जो था वो induced net current वो I1 plus I2 हो गया। लेकिन दूसरे वाले केस में ऐसा है ना कि same बात उसमें भी हुआ। But problem ये आया कि वो ऐसा overlap करके जा रहा था। मतलब एक तरीके से वो उसके उस direction में नहीं गया जिस direction में उसका current flow कर रहा था। उसके opposite direction में गया तो वहाँ पे वो minus हो गया। और ऐसा मान के चल रहा है कि जो I1 current है वो I2 current से ज़्यादा है। इसलिए I1 minus I2
सारे में यह है कि जो लास्ट वाला जो ट्रेंड है ना वो उसमें जो इंसाइड वाला मैग्नेटिक फील्ड था, इंसाइड वाला मैग्नेटिक फील्ड बढ़ रहा है। तो इंसाइड वाला मैग्नेटिक फील्ड को घटाने के लिए आउटसाइड वाला मैग्नेटिक फील्ड लगेगा। तो आउटसाइड वाला मैग्नेटिक फील्ड लगेगा तो एंटी क्लॉकवाइज घुमेगा। तो एंटी क्लॉकवाइज घूमेगा ना। तो मतलब ऐसा घूमेगा वो उधर जाएगा। तो छोटे वाले ट्रायंगल में भी, बड़े वाले ट्रायंगल में भी एंटी क्लॉकवाइज घूमा और छोटे वाले ट्रायंगल में भी एंटी क्लॉकवाइज घूमा। तो जाहिर सी बात है वो वहाँ से एंटी क्लॉकवाइज घूमा। तो उसका जो करंट का डायरेक्शन है और फिर उसका जो करंट का डायरेक्शन उस बड़े वाले ट्रायंगल में से आएगा। वो दोनों ऐसा ऑपोज कर जाएगा और फिर मतलब जिसका ज्यादा होगा तो वो बड़े वाले ट्रायंगल का ज्यादा होगा। तो जिसका मैग्नेटिक फ्लक्स ज्यादा है तो उसका मैग्नेटिक फील्ड भी ज्यादा होगा। और मैग्नेटिक फील्ड ज्यादा होगा तो उसका एरिया भी ज्यादा है। मतलब ऐसा समझ के पता नहीं, यही है, ऐसा कुछ है। तो उस तरह से उसको अपोज किया ना तो जिसका ज्यादा होगा तो वो बड़े वाले ट्रायंगल वाले के करंट का ज्यादा होगा। तो वो करंट d to C है। तो D to C होगा करेगा तो D to C answer हो जाएगा
तो पहले वाले केस में यह आना कि इसमें बोला कि जो पहले बात तो उसमें आउटसाइड मैग्नेटिक फील्ड और आउटसाइड मैग्नेटिक फील्ड घट रहा है। तो उस घट रहा है तो उसको बढ़ाने के लिए इंड्यूस मैग्नेटिक फील्ड उस कॉइल में आउटसाइड वाले होगा तो उसमें आउटसाइड वाला हो रहा है तो मतलब एंटी क्लॉकवाइज घूमेगा। एंटी क्लॉकवाइज घूमेगा तो in the sense कि अगर वो एंटी क्लॉकवाइज घूम रहा है तो मतलब वही पता चल गया कि A to B जाएगा और C to D जाएगा, बात खत्म

Scientific convention
देखो यहाँ पर ऐसा हुआ ना कि पहले तो initially uncharged था। तो जब उस पे outside magnetic field घट रहा है तो उसका वो उसको outside magnetic field को बढ़ाएगा। तो मतलब anticlockwise current चलेगा। मतलब electron opposite direction में चलेगा जिस direction में current है। Electron clockwise direction में चलेगा। तो इस हिसाब से A plate पे negative charge जमा हो जाएगा और B plate पे positive। तो ये B वाला answer सही है



Faradays law of EMI
Based on conservationof energy.
When there is change in flux through any close loop then there is induced emf in loop
Due to emf there is current if loop is conducting and close


The magnetic flux linked with a loop is given by Φ = 5t² − 36t + 1 Wb. Find the induced EMF and current at t = 2 s. The resistance of the loop is 2 Ω.
















If magnetic flux is zero at any instant then emf induced at that instant must be zero
No it's false cause emf does not depends on value of flux it depends on change in flux
A coil is placed perpendicular to a magnetic field of 5000 T. When the magnetic field is changed to 3000 T in 2 seconds, an induced EMF of 22 V is produced in the coil. If the diameter of the coil is 0.02 m, then the number of turns in the coil is:
(1) 7
(2) 70
(3) 35
(4) 140
The magnetic flux (in Weber) linked with a closed circuit of resistance 8 ohm varies with time (in seconds) as Φ = 5t² − 36t + 1. The induced current in the circuit at t = 2 seconds is _____ ampere.
A conducting loop of radius 10/√π cm is placed perpendicular to a uniform magnetic field of 0.5 T. The magnetic field is decreased to zero in 0.5 second at a steady rate. The induced EMF in the circular loop at 0.25 second is:
Option 1: EMF = 1 μV
Option 2: EMF = 10 μV
Option 3: EMF = 100 μV
Option 4: EMF = 5 μV
A square loop of area 25 cm² has a resistance of 10 ohm. The square loop is placed in a uniform magnetic field of magnitude 40 T. The plane of the loop is perpendicular to the magnetic field. The work done in pulling the loop out of the magnetic field slowly and uniformly in one second will be:
Option 1: 2.5 × 10⁻³ J
Option 2: 1 × 10⁻³ J
Option 3: 1 × 10⁻⁴ J
Option 4: 5 × 10⁻³ J
A conducting circuit loop is placed in the XY plane in the presence of a magnetic field B = 3t³ ĵ + 3t² k̂ (in SI units). If the radius of the loop is 1 meter, the induced EMF in the loop at time t = 2 seconds is nπ V. The value of n is _____.
In a coil of resistance 8 ohm, the magnetic flux due to an external magnetic field varies with time as Φ = (2/3)(9 − t²). The total heat produced in the coil till the magnetic flux becomes zero will be _____ joule.


To find out the direction of higher potential, place your four finger of right hand along velocity and slap magnetic field. Thumb will represent point of higher potential



A vertical rod perpendicular to the XY-plane, of length 2 m, is moving with velocity 2 î m/s in a magnetic field B⃗ = 2 î − 5 ĵ + 3 k̂ T. Find the induced EMF in the rod.
A vertical rod of length 8 m along the Z-axis is moving with velocity (2î − 3ĵ) m/s in a magnetic field B⃗ = (2î − 4ĵ + 3k̂) T. Find the induced EMF in the rod.

Isko thoda dekh lena


















Induced electric field
If we place a circular loop inside a outside magnetic field and the outside magnetic field is increasing by time. So the electron in the loop will start moving in clockwise direction and hence produce current. But if we just remove the loop and just put an electron into the field, it will show the same behavior even without being present in a loop. The electron will show the same motion even after removing the loop. So from this we can conclude that when there is uniform magnetic field which is constant, then there is no force on electron. But when there is change in magnetic field with time, then stationary electron inside field experience a force but magnetic field can't apply force on rest charge. Hence there must be electric field present there. That electric field induced a variable magnetic field that induced electric field firms symmetric circular close loop
Electric world just for understanding we have separated like we have divided electric field into two parts. One, first one is real electric field and the second one is fake electric field. So the real electric field is electrostatic field which is due to rest charge and is a conservative field and does not form closed loop. And the work done in closed loop is zero. And when we talk about the fake electric field, it is the induced electric field. So this field is formed due to time varying magnetic field and is non-conservative and it always forms closed loop. And in closed loop work done is not zero
Now to find the direction of induced electric field, we will take the direction of induced current as the direction of electric field




Is this statement true or false that varying magnetic field induced electric field? So this statement is false because time varying magnetic field induce, sorry, time varying magnetic field induce electric field. We need to be specific about this. Right there it is time varying or space varying. Space varying magnetic field does not induce electric field. But time varying magnetic field induces electric field













Rr























