Electromotive force and internal resistance

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/24

encourage image

There's no tags or description

Looks like no tags are added yet.

25 Terms

1
New cards

How is electromotive force (ε) defined in terms of energy and charge?

ε is the total electrical energy produced per unit charge inside the source (ε=E/Q).

2
New cards

What is terminal potential difference (V) across a power source?

V is the electrical energy per unit charge delivered to the external circuit when current flows through the source.

3
New cards

What physical mechanism causes internal resistance (r) within an electric cell?

Opposition to charge flow within the materials of the source itself, converting electrical energy into thermal energy inside the cell.

4
New cards

What does the term 'lost volts' represent in a circuit?

The potential difference dropped across the internal resistance (Ir), representing energy wasted per coulomb inside the source.

5
New cards

What is the fundamental circuit equation linking EMF (ε), current (I), load resistance (R), and internal resistance (r)?

ε=I(R+r)

= IR+Ir

6
New cards

How is terminal potential difference (V) calculated using cell EMF (ε), current (I), and internal resistance (r)?

V = ε−Ir

7
New cards

Under what specific condition does the terminal potential difference of a cell equal its EMF?

When no current is drawn from the cell (I=0), making lost volts (Ir) equal to zero.

8
New cards

Why does terminal potential difference decrease as current drawn from a cell increases?

Increasing current increases lost volts (Ir), reducing the voltage remaining for the external load (V=ε−Ir).

9
New cards

What is the equation for total electrical power supplied by a cell?

Psupplied = Iε= I^2R + I^2r

10
New cards

How is power delivered to an external load resistor (R) expressed in terms of cell EMF (ε), R, and internal resistance (r)?

P =I^2R = ε^2R//(R+r)^2

11
New cards

How is wasted thermal power inside a cell calculated?

Pwasted = I^2r

12
New cards

Under what load condition is maximum power transferred from a source to an external circuit?

When external load resistance equals internal resistance (R=r).

13
New cards

What is the expression for peak power delivered to a load when load resistance is matched to internal resistance (R=r)?

Pmax = ε^2//4r

14
New cards

What efficiency is achieved when a power source operates under the maximum power transfer condition (R=r)?

50% (half of the total power is dissipated internally as wasted heat).

15
New cards

How is V=ε−Ir arranged into standard linear form y=mx+c for plotting?

V=−rI+ε,

where y = V, x=I,

gradient m =−r,

y-intercept c = ε.

16
New cards

In a plot of terminal potential difference (V) against current (I), what feature reveals the cell's EMF (ε)?

The y-intercept of the straight line (V=ε at I=0).

17
New cards

How is internal resistance (r) calculated from a graph of terminal potential difference (V) versus current (I)?

r = −gradient (the absolute magnitude of the line's negative slope).

18
New cards

What physical quantity does the x-intercept of a V vs I cell characteristic graph represent?

The short-circuit current (Isc =ε/r when terminal PD V=0).

19
New cards

What essential electrical components are connected to gather data for a V vs I graph of a cell?

A cell, variable resistor, series ammeter, voltmeter across cell terminals, and a switch.

20
New cards

Why is a variable resistor used in the practical circuit to measure internal resistance?

To vary circuit resistance, enabling measurement of terminal potential difference across a range of current values.

21
New cards

Why is a fixed resistor or lamp included in series during internal resistance experiments?

To limit maximum current, preventing excessive heating and rapid discharge of the cell.

22
New cards

What resistance assumptions apply to ideal meters when measuring cell parameters?

An ideal ammeter has zero resistance; an ideal voltmeter has infinite resistance.

23
New cards

What are total EMF (εtotal) and internal resistance (rtotal) for n identical cells in series?

εtotal = nε and rtotal = nr

24
New cards

What are total EMF (εtotal) and internal resistance (rtotal) for n identical cells in parallel?

εtotal = ε and rtotal = r/n

25
New cards

How does conservation of energy express itself in a circuit with internal resistance?

Energy supplied per coulomb by the cell equals the sum of energy delivered to the load and energy wasted internally per coulomb (ε=V+Ir).