1/63
Looks like no tags are added yet.
Second Law of Thermodynamics
Energy spontaneously disperses from areas of high temperature to low
3 energy transfers via heat
Conduction:
transfer of energy through molecular collisions
Convection:
transfer of energy through movement of matter ( ex. fluids)
Radiation:
transfer of energy through photon emission and absorption
does NOT require matter
Work vs. Heat
Work:
energy transferred through force applied over distance
( W = F x d)
Heat:
energy transferred through conduction, convection, and radiation
Electric field
Tells the direction and strength of force one charge exerts on another
Insulator vs. conductor
Insulator:
resists movement of charge b/c electrons tightly linked with their nuclei
ex.) wood, glass, rubber
Conductor:
allows free movement of charge (electrons)
ex.) metals
Electric potential energy
dependent on position of one charge with respect to another charge or a collection of charges
Describe how the distance of charges affect electric potential energy
‘+‘ and ‘-’ = attractive, so lower potential energy → kinetic energy
Charges farther apart = higher potential energy
Charges closer together = lower potential energy
How does the type of charge relate to the spontaneity of electric potential
Electric potential (V) = electric potential energy per charge ( U/q)
Postive:
spontaneously move in direction that decreases electric potential ( negative voltage)
Negative:
spontaneously move in direction that increases electric potential ( positive voltage)
Equipotential line
Line where the potential at every point is the same, so potential diff b/w points = 0
Magnetic Force
Force exerted when charge moves in a magnetic field w/ a velocity perpendicular to magnetic field vector
Describe the Right Hand Rules
Right Hand Rule for Magnetic Fields near Current Carrying Wires:
Thumb = direction of current (I)
Curled Fingers = direction of magnetic force
Right Hand Rule for Direction of Magnetic Force on Moving Charge:
Thumb = velocity
Fingers = field lines
Palm = force on ‘+‘ charge
Back of hand = force on ‘-’ charge
Anode vs. Cathode
Anode:
electrode where oxidation occurs (anions)
Cathode:
electrode where reduction occurs (cations)
*** movement of electrons = anode (-) → cathode (+)
Galvanic (Voltaic) Cells
uses spontaneous oxidation-reduction rxn to generate electromotive force (release energy)
ΔG < 0, Ecell > 0
Electrolytic Cell
Uses an external voltage source to drive nonspontaneous oxidation reduction rxn (energy stored in cell)
ΔG > 0, Ecell < 0
Describe groups of elements within the periodic table
Representative elements: groups 1,2, 13 - 18 (s and p orbitals)
Alkali metals: group 1 (more reactive)
Alkaline earth metals: group 2
Transition metals: groups 3 - 12 (d block)
multiple oxidative states and color properties
Halogens: group 7 (salts)
Noble gases: most unreactive + stable
Electronegativity vs. Ionization Energy
Electronegativity:
ability to pull shared electrons towards itself
Ionization Energy:
energy needed to remove electrons
Define Effective Nuclear Charge, and describe its relationship periodic trends
Pull that valence electrons “feel” from nucleus (net positive charge)
Electronegativity:
Direct relationship increasing from left to right + bottom to top
Ionization Energy:
Direct relationship increasing from left to right + bottom to top
Atomic Radius:
Inverse, where Zeff increases, atomic radius decreases
Higher Zeff → smaller radius
Lower Zeff → larger radius
Define Reduction Potential and describe its relationship with Zeff
Difference in electric potential energy b/w an atom’s and Hydrogen’s valence electrons
Directly proportional to Zeff
Bigger reduction = reduced ; smaller reduction = oxidized
As electrons go from a lower to a higher energy level, they get AHED
Absorb light
Higher potential
Excited
Distant (from the nucleus)
Pauli exclusion principle
No two electrons in a given atom can possess the same set of four quantum numbers
Describe the electronic structure
Principle quantum # (n) → energy levels/ shells
Angular momentum # (L) → sub shells ( s, p, d, f) ; L = n-1
Magnetic quantum # (m1) → ranges from -1 to + 1
Spin quantum # (ms) → + ½ or - ½
Aufbau principle
each subshell will fill completely before electrons begin to enter the next one
Hund’s rule
orbitals are filled where there are a maximum number of half-filled orbitals with parallel spins
Diamagnetic vs. Paramagnetic
Diamagnetic:
every electron in every orbital paired
Paramagnetic:
atom w/ unpaired electrons
what will the values of L, m1, and # of orbitals be for the different sub shells

Photoelectric Effect
High energy light excites electrons above energy levels associated with the atom itself
Radioactive Decay
naturally spontaneous decay of certain nuclei along with the emission of specific particles
Alpha vs. Gamma decay
Alpha:
results in atom w/ atomic number 2 lower and atomic mass 4 lower than original atom
Gamma:
results in atom w/ same atomic and mass number
Beta -decay vs. Beta +decay
Beta -decay :
electron emitted to be more positive, atomic number +1 and mass number unchanged (gains a proton)
Beta +decay :
nucleus emits position (e+), atomic number drops by 1, mass number unchanged
Conservation of charge
the total charge must remain constant before and after decay process
Conservation of mass
the total number of nucleons must remain constant before and after decay process
Half life
Time required for ½ of sample of radioactive nuclei to decay
Reaction rate vs Rate law
Reaction rate:
measures the rate of reactant consumption or product formation
mols/ L*s
Rate law:
reaction rate from the reaction concentrations
1st law: proportional to 1 reactant
2nd law: proportional to 2 reactants
Describe the relationship between ion product (IP) and solubility (Ksp)
IP < Ksp → unsaturated
IP = Ksp → saturated
IP > Ksp → supersaturated (precipitate formation)
Le Chatelier’s principle
Reducing conc. of product → rxn shifts towards product (right)
Increasing conc. of product → rxn shifts towards reactants (left)
Common Ion Effect
the presence of an ion in solution will decrease the solubility of a compound containing that ion
Electron affinity
energy change (amount of energy released) from an electron to an atom to form a negative ion
Solubility rules
Soluble = all salts of group 1 and nitrate salts
insoluble halides: Ag, Pb
Insoluble salts of sulfate: Ca, Sr, Ba, Pb
Other insoluble: CO32-, PO43-, S2-, SO32-
Scientific Notation
LARS (Left Add ; Right Subtract)
or
move right = ‘-’ notation ; move left = ‘+’ notation
Open, Closed, and Isolated systems
Open = system can exchange both energy (heat and work) and matter with surroundings
Closed = system can exchange energy but not matter with surroundings
Isolated = system cannot exchange energy or matter with surroundings
System vs. Surroundings
System:
matter being conserved/ amount of reactant and product in a chemical rxn
Surroundings :
everything outside of that system/ environment
State vs. Process Function
State:
properties of a system at equilibrium and independent of path taken to reach equilibrium
Ex.) pressure, density, temp, volume, enthalpy internal energy, Gibbs, and entropy
Process:
that oath between equilibrium states, including Q (heat) and W (work)
Phase changes
Solid to liquid → melting/ fusion
Liquid to solid → freezing/ solidification
Liquid to gas → evaporation/ vaporization
Gas to liquid → condensation
Solid to gas → sublimation
Gas to solid → deposition

Heat vs. Temperature
Temperature:
measure of average kinetic energy of particles in a system
Heat:
transfer of energy from a warmer substance to a cooler substance
Hydrostatic pressure
Total pressure exerted on an object that is submerged in a fluid (dependent on depth of fluid)
P = P0 + ρgz
Pascal’s Law
The pressure applied to an incompressible fluid is distributed equally throughout the fluid
Archimedes principle
The buoyant force on an object is equal to the weight of the fluid that object displaces
Buoyant Force
Net upward force in a fluid that results from immersion in a fluid, causing a greater pressure on the bottom than top of an object
Cohesion vs. Adhesion
Cohesion:
attractive force that a molecule of liquid feels toward other molecules of the same liquid
Adhesion:
attractive force that a molecule of the liquid feels toward the molecules of some other substance
Bernoulli’s equation
relies static and dynamic pressure for a fluid to the pressure exerted on the walls of a tube and speed of fluid
Venturi effect
As the cross sectional area of a tube decreases, the speed of the fluid increases, and the pressure exerted on the walls of tube decreases
amphoteric
acts as an acid or a base
Describe the relationship between the reactivity of acids and bases with their conjugate
The STRONGER an acid, the WEAKER its conjugate base
The STRONGER a base, the WEAKER its conjugate acid
The WEAKER an acid, the STRONGER its conjugate base
The WEAKER a base, the STRONGER its conjugate acid
Acid/Base vs. Conjugate acid/base
Acid: donate proton
Base: accept proton
Conjugate acid: when base accepts proton
Conjugate base: when acid gives away proton
Ka vs. pKa
Higher Ka = stronger acid
Lower pKa = stronger acid
Inert molecules
Ka and Kb values less than water (10-14)
Strong acids and bases
acids:
HCl, HBr, HI, H2SO4, HNO3, HClO3, HClO4
bases:
NaOH, KOH, CsOH, Ca(OH)2, Ba(OH)2
Weak acids and bases
acids:
CH3COOH, H2CO3, HF, HCN, H3PO4
bases:
NH3, NH4OH, C5H5N
Level of reactivity of Acid Derivatives
Amides (least reactive/ most stable)
Carboxylic acids, Esters
Acid anhydride
Acyl halide (most reactive/ unstable)
Nucleophilic Acyl Substitution (NAS)
Nucleophilic attack on carbonyl carbon
Tetrahedral intermediate formation
Loss of leaving group

Transesterfication
produces an ester and alcohol
Level of reactivity of halides
F- ( most stable, least reactivity, poor LG)
Cl-
Br-
I- (least stable highest reactivity, best LG)
Oxidation vs. Reduction potential
Oxidation:
when electrons appear as products (lose electrons)
Reduction:
when electrons appear as reactants (gain electrons)