1/24
Looks like no tags are added yet.
What is the haber process
In the haber process nitrogen and hydrogen gas are used to make ammonia
nitrogen is obtained easily from the air
hydrogen mainly comes from reacting natural gas (methane) with steam
What is Ammonia
Ammonia is an important chemical in the production of lots of other chemicals
What is the ammonia produced by the Haber process used for
used to manufacture nitrogen based fertilisers
How the haber process makes ammonia
Some of the hydrogen and nitrogen reacts to form ammonia
The reaction is reversible so ammonia breaks down again into nitrogen and hydrogen
The gas is then cooled in a condenser, liquefies and is removed from the reaction vessel
The unused nitrogen and hydrogen are recycled

What is the effect of making Ammonia
It consumes of 1% of all man made power (a significant amount of all world energy)
what is the equation for the Haber process
This reaction produces heat, so it is exothermic

What is the temperature, pressure and catalyst used to make ammonia
Temperature - 450 degrees
Pressure - 200 atm
Catalyst - Fe (iron)
Haber compromise - why does the haber process use the condition of 450 degrees (temperature)
Increase in temp favours the endothermic reaction, in this reaction this is the backwards reaction. Equilibrium shifts to the left, make more N2 + 3H2
Needs to be low to favour forwards reaction
But low temp = low rate
Compromise = 450 degrees
Low enough to favour forwards reaction
But high enough so rate isn’t too slow
Haber compromise - why does the haber process use the condition of 200 atm (pressure)
Increase in pressure favours the reaction that produces less gas molecules in this reaction this is the forward reaction as it produces less moles of gas. Equilibrium shifts to the right, make more NH3
The forward reaction produces less molecules so high pressure needed
But high pressure is difficult to maintain, could explode and cost a lot
Compromise = 200 atm
High enough to favour forwards reaction
But low enough so it is safe/cheap
Haber compromise - why does the haber process use the condition of Fe catalyst
Adding a catalyst does not alter the position of equilibrium. Both reactions are sped up equally, so we reach equilibrium faster
ideal use is iron catalyst, so no compromise
What are the conditions for the Haber process chosen based on
cost, yield, rate and availability of raw materials
What are the three main essential elements needed by plants
nitrogen, phosphorus, and potassium
Why do plants require nitrogen, potassium and phosphorus?
Nitrogen promotes healthy leaves,
Potassium promotes growth, healthy fruit and flowers
Phosphorus promotes healthy roots
What happens to plants if they don’t get enough of these elements and why might they be missing from the soil
their growth and life processes are affected and these elements might be missing from the soil if they’ve been used up by a previous crop
What is a fertiliser
A fertiliser is a compound containing nutrients that is applied to soil or plants to promote growth and increase crop yields
What are NPK fertilisers
formulations containing salts of nitrogen (N), phosphorus (P) and potassium (K) in the right percentages of the elements
What is ammonia produced by the Haber process used for in fertilisers
it can react to form other nitrogen-containing compounds
How is nitric acid produced
Reacting ammonia with oxygen and then water products
What are ammonium salts
common compounds found in fertilisers formed by reacting ammonia with acids
How is the salt ammonium nitrate formed
it can be formed from the reaction of nitric acid and ammonia

Why is the salt ammonium nitrate an especially good component of fertiliser
it has a high proportion of nitrogen per unit mass
What are good potassium compounds used in fertilisers
Potassium chloride and potassium sulfate can be mined and used as a source of potassium
Can phosphate rock be used directly as a fertiliser
no, it must react with different types of acids to produce soluble salts that can be used as fertilisers
What are the names of the salts produced when phosphate rock is treated with nitric acid, sulfuric acid and phosphoric acid
Reacting phosphate rock with nitric acid produces phosphoric acid and calcium nitrate
Reacting phosphate rock with sulfuric acid produces calcium sulfate and calcium phosphate (this mixture is known as single superphosphate)
Reacting phosphate rock with phosphoric acid only produces calcium phosphate (the product of this reaction can be called triple superphosphate)
Compare producing fertilisers in industry and in the laboratory
Industry:
Ammonia gas is added directly to giant vats containing highly concentrated nitric acid
It’s an exothermic reaction
The heat released is used to evaporate water from the mixture to make a very concentrated ammonium nitrate product
Lab:
The reaction is carried out on a much smaller scale by titration
Ammonia solution is used, and the reactants are at a much lower concentration than in industry
Less heat is produced by the reaction, and it’s safer for a person to carry it out
After the titration, the mixture needs to be crystallised to give pure ammonium nitrate crystals. Crystallisation isn’t used in industry because it’s very slow