1/19
Comprehensive practice flashcards covering the regulatory, technical, and metrological requirements of the Mexican standard NMX-AA-179-SCFI-2018 for measuring national water volumes.
The purpose of the NMX-AA-179-SCFI-2018 standard is to provide ________ in the measured volumes of used, exploited, or harnessed national waters.
certainty
The standard aims to avoid the sub-declaration of water usage and the ________ of the resource.
hoarding
A ________ is a legal entity accredited by the EMA and approved by CONAGUA to handle the selection, installation, and operation of measurement systems.
prestador de servicios integrados
Users of national waters have a legal obligation to transmit their measurement data to the ________.
Comisión Nacional del Agua
The standard defines the constant of acceleration of gravity (g) as ________.
9.81m/s2
For subterranean water sources with pressure flow, a meter must be selected for nominal diameters (DN) between ________.
13mm≤DN≤800mm
In conduits with a diameter greater than 800 mm (DN>800mm), the meters must be ________ of the spool (carrete) type.
electromagnetic
According to the Maximum Permissible Error (MPE) for Class 2 meters, the error in the lower flow zone (Q1≤Q<Q2) must be ±________ %.
5
For the upper flow zone (Q2≤Q≤Q4), the MPE for Class 2 meters at temperatures between 0.1∘C and 30∘C is ±________ %.
2
The ratio of the transition flow to the minimum flow rate (Q2/Q1) is specified as ________.
1,6
The ratio for the maximum extraordinary operating flow to the maximum operating flow (Q4/Q3) is specified as ________.
1,25
The periodic verification for volumetric meters with moving parts (such as propellers or turbines) must be conducted every ________.
year
Meters without moving parts (such as electromagnetic or ultrasonic) must undergo periodic verification every ________ year(s).
seven
An initial verification must be performed within ________ natural days following the installation of a new or repaired meter.
30
The measurement system's non-volatile memory must be capable of storing and keeping data accessible for a minimum of ________ year(s).
five
The cabinet used to protect the electronic components must comply with NEMA-4X or ________ standards.
IP-66
To prevent condensation inside the cabinet, the user must place at least ________ of desiccant material such as silica gel.
200g
The data transmission unit can send information to the authority via File Transfer Protocol (FTP) or ________.
short message service (SMS)
The NMX-AA-179-SCFI-2018 standard is ________ to any international standard because none existed at the time of its creation.
Not equivalent (NEQ)
An ultrasonic flowmeter configuration consisting of a single pair of sensors with one trajectory for pressure piping is abbreviated as ________.
ATTC