1/47
Comprehensive vocabulary flashcards covering intermolecular forces, phase changes, phase diagrams, colligative properties of solutions, vapor pressure dynamics, gas solubility, and stoichiometry principles from General Chemistry I.
Saturated Solution
A solution in which the quantity of dissolved solute remains constant over time at a specific temperature; adding more solute does not increase the dissolved amount, causing the excess solid to collect at the bottom.
Unsaturated Solution
A solution that contains less dissolved solute than the maximum equilibrium capacity at a given temperature, allowing additional solute to dissolve.
Supersaturated Solution
An unstable solution that contains a greater quantity of dissolved solute than a saturated solution at the same temperature, prepared by heating and cooling carefully; introducing a seed crystal triggers rapid precipitation.
Vapor Pressure
The pressure exerted by a vapor in dynamic equilibrium with its liquid phase resulting from the evaporation of the liquid in a closed container.
Boiling Point
The temperature at which the vapor pressure of a liquid equals the surrounding atmospheric pressure.
Melting Point
The temperature at which a solid loses its definite shape and transitions into the liquid state; it is numerically identical to the freezing point of the liquid.
Phase Diagram
A graphical representation showing the temperature (on the x-axis) and pressure (on the y-axis) conditions under which thermodynamic equilibria exist between the solid, liquid, and gas phases of a substance in a closed system.
Triple Point
The unique temperature and pressure at which three distinct phases of a substance (typically solid, liquid, and gas) coexist in thermodynamic equilibrium.
Critical Point
The terminating point on a phase boundary curve at critical temperature (Tc) and critical pressure (Pc) where the liquid and vapor phases become indistinguishable and merge into a single phase.
Supercritical Fluid
A physical state of matter existing at temperatures and pressures beyond the critical point, characterized by possessing the high density of a liquid alongside the low viscosity of a gas.
Negative Slope of the Solid/Liquid Boundary
An atypical feature on a phase diagram—characteristic of water—indicating that the melting point decreases as pressure increases because the solid phase (ice) is less dense than the liquid phase.
Homogeneous Mixture
A uniform mixture of two or more substances having identical composition and properties throughout, also known as a solution.
Heterogeneous Mixture
A mixture containing two or more substances that possesses varying composition and non-uniform properties in different regions.
Molarity (M)
A concentration unit defined as the number of moles of solute dissolved per liter of solution (mol solute/L solution).
Molality (m)
A concentration unit defined as the moles of solute divided by kilograms of solvent (mol solute/kg solvent); its value is independent of temperature changes.
Mole Fraction (χA)
A dimensionless concentration metric expressing the ratio of the moles of a specific component (molA) to the total moles of all components (moltot) in a mixture.
Colligative Properties
Physical properties of solutions that depend solely on the total number of dissolved solute particles present, rather than the chemical identity of those particles.
van 't Hoff Factor (i)
A multiplier representing the number of moles of individual particles produced in solution per mole of solute dissolved (e.g., i=2 for NaCl, i=5 for Fe2(SO4)3).
Freezing Point Depression
The reduction in the freezing temperature of a solvent when a nonvolatile solute is added, calculated by ΔTf=iKfm, resulting from solute particles replacing solvent particles at the surface and shifting the equilibrium.

Eutectic Point
The lowest possible temperature to which a specific chemical or deicer formulation can depress the freezing point of water, attained at a unique solute concentration.
Boiling Point Elevation
The increase in the boiling temperature of a solvent caused by the addition of a solute, represented mathematically by ΔTb=iKbm, which occurs because solute particles decrease solvent surface concentration and lower vapor pressure.
Osmosis
The net spontaneous flow of a pure solvent through a semipermeable membrane into a solution containing a non-penetrating solute, moving from higher solvent concentration to lower solvent concentration.
Semipermeable Membrane
A thin barrier containing microscopic pores that selectively permit the diffusion of solvent molecules while preventing the passage of larger solute particles.
Osmotic Pressure (Π)
The external pressure required to completely prevent the net inward osmotic flow of solvent across a semipermeable membrane into a solution, modeled by Π=iMRT.
Reverse Osmosis
A separation process in which an external pressure exceeding the osmotic pressure is applied to a solution, forcing pure solvent backwards through a semipermeable membrane from a concentrated solution to a dilute side.
Raoult's Law
A thermodynamic law stating that the partial vapor pressure of a solvent above a solution (PA) is equal to the mole fraction of the solvent in the liquid phase (χA,liq) multiplied by the vapor pressure of the pure solvent (PA∘): PA=χA,liqPA∘.
Ideal Solution
A solution that adheres strictly to Raoult's law across all concentrations, characterized by components with virtually identical intermolecular forces that mix without releasing or absorbing heat (ΔHmix=0).
Positive Deviation from Raoult's Law
A condition where the total vapor pressure of a real solution is higher than predicted by Raoult's law because the adhesive forces between unlike molecules are weaker than the cohesive forces in the pure components.
Negative Deviation from Raoult's Law
A condition where the total vapor pressure of a real solution is lower than predicted by Raoult's law because newly formed attractive interactions (such as intermolecular hydrogen bonds between acetone and chloroform) are stronger than the original interactions.

Fractional Distillation
A laboratory and industrial separation technique that isolates components of a volatile liquid mixture based on differences in their boiling points through continuous, repetitive vaporization-condensation cycles in a column.
Clausius-Clapeyron Equation
A mathematical relationship describing how vapor pressure changes non-linearly with temperature, expressed in two-point form as ln(P2P1)=RΔHvap(T21−T11).
Enthalpy of Vaporization (ΔHvap)
The quantity of heat energy required to vaporize one mole of a liquid at a given temperature and pressure.
Henry's Law
A gas law stating that the solubility of a gas in a liquid solvent (Cg) is directly proportional to the partial pressure of that gas above the solution (Pg), given by Cg=kPg.
Stoichiometry
The branch of chemistry dealing with the quantitative relationships and proportions between the amounts of reactants consumed and products formed in a balanced chemical reaction.
Combustion Reaction
A chemical reaction in which a carbon- and hydrogen-containing starting material reacts with oxygen gas (O2) under heating to yield carbon dioxide gas (CO2) and water vapor (H2O).
Decomposition Reaction
A type of chemical reaction where a single reactant compound breaks down into two or more simpler elements or compounds.
Synthesis Reaction
A chemical reaction where two or more individual chemical species combine to produce a single, more complex product compound.
Precipitation Reaction
A chemical process wherein soluble ionic reactants in aqueous solution react to form one or more insoluble solid products known as precipitates.
Molecular Weight (MW)
The sum of the atomic masses of all atoms present in a molecular formula, reported in units of g/mol (referred to as formula weight for ionic substances).
Limiting Reactant
The reactant in a chemical reaction that is completely consumed first, thereby limiting the theoretical yield of product that can be generated.
Excess Reactant
The reactant that remains unconsumed after the limiting reactant has completely reacted in a chemical reaction.
Theoretical Yield
The maximum calculated quantity of product that can be generated from given starting amounts of reactants assuming complete stoichiometric conversion and zero losses.
Percent Yield
The ratio of the experimentally measured mass of product obtained to the calculated theoretical maximum mass, expressed as a percentage: theoretical massactual mass×100%.
Percent Composition
The percentage by mass of each individual element present within a compound, calculated by dividing the total elemental mass by the total molar mass of the compound and multiplying by 100%.
Empirical Formula
The simplest chemical formula showing the lowest whole-number molar ratio of atoms of each element in a chemical compound.
Molecular Formula
A formula indicating the actual total numbers of atoms of each element present in a single molecule of a compound, which is an integer multiple of its empirical formula.
Combustion Analysis
An analytical method used to deduce the empirical formula of an organic sample by burning it in excess oxygen and measuring the resultant masses of produced CO2 (yielding carbon mass) and H2O (yielding hydrogen mass).

Volumetric Flask
A precise piece of laboratory glassware calibrated to contain an exact, specified volume of solution at a marked etched fill line.