Engines Exam 2

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/66

encourage image

There's no tags or description

Looks like no tags are added yet.

67 Terms

1
New cards
<p>What happens during process 1 —&gt; 2?</p>

What happens during process 1 —> 2?

Compression Stroke

Adiabatic, reversible compression of the fuel-air mixture from BDC to TDC

2
New cards
<p>Why is entropy constant during 1 —&gt; 2?</p>

Why is entropy constant during 1 —> 2?

Compression is assumed adiabatic and reversible, making it isentropic

3
New cards
<p>What happens during process 2 —&gt; 3?</p>

What happens during process 2 —> 3?

Combustion

Constant volume, adiabatic combustion at TDC

4
New cards

Why is work zero during constant volume combustion?

There is no volume change so W = integral of P dv = 0

5
New cards

Why is U3 = U2 even though combustion occurs?

No heat crosses the boundary and no work is done, chemical energy is included in U

6
New cards
<p>What happens during process 3 —&gt; 4?</p>

What happens during process 3 —> 4?

Expansion Stroke

Adiabatic, reversible expansion of combustion products from TDC to BDC

7
New cards

Why is an IC engine modeled as an open system?

Air and fuel enter, exhaust leaves, and the engine transfers heat and shaft work

8
New cards

Why cool exhaust to environmental temperature

To account for the recoverable energy remaining in the hot exhaust

9
New cards

What determines the max possible work from combustion?

The difference in Gibbs free energy between reactants and products

10
New cards

Why can theoretical IC engine efficiency exceed 100%?

Max reversible work can exceed fuel LHV, this is not actual engine efficiency

11
New cards

Does theoretical efficiency above 100% violate thermodynamics

No. Fuel LHV is not the total theoretical work limit. Environmental heat may contribute

12
New cards

What is a heat engine?

Working fluid operates in a cycle, receives energy as heat from a thermal reservoir, produces work from a heat source

Exchanges heat with two thermal reservoirs, peak efficiency coincides with peak temperature

13
New cards

What is an IC engine?

Working fluid does not complete a cycle (products are not returned to reactants like in a heat engine), they are exhausted

There is no thermodynamic need to exchange heat

Peak efficiency does not always coincide with peak temperature

14
New cards

Why must a heat engines thermal efficiency be bellow 100%?

The second law requires some heat rejection to a lower temperature reservoir

15
New cards

What are the five major sources of engine efficiency losses?

Incomplete combustion, heat transfer, unrecovered exhaust energy, pumping, and friction

16
New cards

Why does increasing compression ratio improve work extraction?

It increases the expansion ratio, recovering more work and reducing exhaust losses

17
New cards

What disadvantages come with decreasing equivalence ratio?

Flame speed decreases, combustion losses rise, and naturally aspirated load falls

18
New cards

How is load controlled in a spark ignition engine?

By throttling the intake, controlling how much air-fuel mixture enters

19
New cards

SI: how does a carburetor draw fuel into the intake air?

A venturi creates a pressure difference that draws fuel through an orifice

20
New cards
<p>Which shows throttle body injection? </p>

Which shows throttle body injection?

A

21
New cards
<p>Which shows port fuel injection?</p>

Which shows port fuel injection?

B

22
New cards
<p>Which shows direct injection?</p>

Which shows direct injection?

C

23
New cards

SI: why do higher cylinder pressures require greater spark voltage?

High pressure makes electrical breakdown across the spark gap more difficult

24
New cards

SI: what does MBT spark timing mean?

Minimum spark advance needed to achieve max brake torque

25
New cards

SI: why does torque decrease when spark timing is too retarded?

Combustion occurs too late, reducing useful expansion work

26
New cards

SI: why is max spark advance limited by knock?

Advancing the spark heats and compresses the end gas sooner, promoting auto ignition

27
New cards

SI: why is turbulence important for engine combustion?

It increases effective flame speed and allows faster combustion

Increases surface area available

28
New cards

SI: What happens to flame speed as the flame approaches the wall?

It decreases because wall cooling and reduced turbulence slow combustion

29
New cards

SI: what factors govern flame propagation?

Air-fuel ratio, chamber geometry, bulk air motion, and turbulence

30
New cards

SI: what causes combustion knock?

Spontaneous auto ignition of unturned end-gas before the flame arrives

31
New cards

SI: why does higher end gas temperature increase knocking?

Higher temperature shortens ignition delay, encouraging auto ignition

32
New cards

SI: what methods reduce knocking tendency?

Lower CR, retard spark, increase octane, speed up burning, or use cooled EGR

33
New cards

SI: how do knock, pre ignition, and post ignition differ?

Knock is end gas auto ignition, pre ignition occurs before spark, post ignition is after spark

34
New cards

How is combustion initiated in a CI engine?

Fuel is injected into hot, high pressure compressed air and auto ignites

35
New cards

CI: What enters the cylinder during the intake stroke of a diesel engine?

Air alone

Fuel is injected later into the compressed air

36
New cards

How is load controlled in a CI engine?

By changing the quantity of fuel injected

37
New cards

CI: What controls combustion phasing in a diesel engine?

Start of Injection timing (SOI)

38
New cards

CI: What is ignition delay?

The time between start of injection (SOI) and start of combustion (SOC)

39
New cards

CI: What happens to ignition delay with a less reactive fuel?

Ignition delay increases because the fuel takes longer to auto ignite

40
New cards

CI: What happens to premixed HRR (heat release) if CR decreases?

It generally increases because cooler air extends ignition delay and premixing

41
New cards

CI: Why does reducing compression ratio increase ignition delay?

Lower compression temperatures slow the fuel’s autoignition chemistry

42
New cards

CI: What is liquid length?

The distance from the injector to the end of the liquid fuel region

43
New cards

CI: Does every early injection increase liquid impingement on the wall?

Yes, cooler, less dense air allows longer liquid penetration toward the walls

44
New cards

Alkanes

Saturated hydrocarbons with single bonds

Straight or branched chains

45
New cards

What does octane number measure?

A fuels resistance to spontaneous reaction (knock) at high pressure and temperature

46
New cards

What are RON and MON?

Research and Motor Octane Numbers, measures under different engine test conditions

47
New cards

What is AKI (Antiknock Index)?

The average RON and Mon, the octane rating displayed at US gas pump

48
New cards

What is fuel sensitivity?

RON minus MON, it shows how knock resistance changes with operating conditions

49
New cards

What does cetane number measure?

How readily a fuel auto ignites under high temperature and pressure

50
New cards

How are cetane and octane numbers related?

Generally inversely

High cetane favors diesel ignition, high octane resists SI knock

51
New cards

How does molecular structure affect octane number?

Longer straight chains lower octane, branching and aromatic rings raise it

52
New cards

How can diesel fuels cetane number be increased?

Use more long chain normal alkanes, fewer aromatics, or cetane improvers

53
New cards

At 50 deg F will switching from 87 to 93 AKI save fuel if 87 reaches MBT?

No expected benefit, spark timing already achieves max torque without knock

54
New cards

At 100 deg F why might switching from 87 to 93 AKI save fuel?

Higher octane resists knock and may let spark timing advance closer to MBT

55
New cards

What happens if cetane number decreases by 10 points?

Ignition delay increases because the fuel is less prone to autoignition

56
New cards

Would diesel fuel make knock more problematic in an SI engine?

Yes, diesel has low octane and is more prone to autoignition

57
New cards

What is entropy?

A thermodynamic property related to energy dispersal. Entropy generation indicates irreversibility

58
New cards

What does adiabatic mean?

A process with no heat transfer between the system and surroundings

59
New cards

What does isentropic mean?

A constant entropy process, ideally both adiabatic and reversible

60
New cards

What is equivalence ratio?

Actual fuel air ratio divided by stoichoimetric fuel air ratio

< 1 is lean

> 1 is rich


61
New cards

What is a Venturi?

A narrowed flow passage that increases fluid velocity and lowers static pressure

62
New cards

What does BDC stand for?

Bottom Dead Center

The pistons lowest position, where cylinder volume is maximum

63
New cards

What does TDC stand for?

Top Dead Center

The pistons highest position, where cylinder volume is minimum

64
New cards

What does stoichiometric combustion mean?

Combustion with exactly enough oxygen to completely burn the fuel

65
New cards

What is heat release rate (HRR)?

The rate at which chemical energy is released during combustion

66
New cards

What is lower heating value (LHV)?

Fuel combustion energy released, excluding heat recovered by condensing product water vapor

67
New cards

What is brake thermal efficiency (BTE)?

The fraction of fuel chemical energy converted into useful engine shaft work