1/32
Looks like no tags are added yet.
Windbreak establishment
How are they planted?
• In single or double rows near the fence line and within the
orchard
The most important role of windbreak is to reduce windspeed and
to protect the crop from damage
Height
Canopy density
Windbreak Effectiveness depends on:
Height
Tall windbreak protects a larger area
It was estimated that windbreak can reduce windspeed
up to the maximum distance of 20x its height.
It could be lesser depending on other factors
Canopy density
A dense canopy provides more protection than the
windbreak with less dense canopy
At 30% density
windspeed is reduced less than 80 %
of its speed in the open to the distance of 12x the
tree height
At 50 % density
windspeed is reduced to less than 80 % of
its speed in the open to a distance of 20x the tree height
Tall species (over 15 m)
Mahogany
Molave
Santol
Tamarind
Pili
Agoho
Narra
Medium (5-15 m)
Chico
Kakawati
Banaba
Short
Bougainvilla
Achuete
An integrated process of timely application of the needed
amount of water and the removal of excess water from the
field to ensure optimum growth and crop productivity
Water management
An integrated process of timely application of the needed
amount of water and the removal of excess water from the
field to ensure optimum growth and crop productivity
Excess water causes
1. too much leaching of nutrients
from the soil and lead to high
acidity
2. water-logged condition which
leads to reduced root
development and death of
roots due to lack of oxygen
3. predisposes the plant to root-rotting pathogens
e.g. Phytopthora, Pythium, Rhizoctonia,
Fusarium
Irrigation
Hence, the need for an effective and efficient irrigation
program that addresses the following:
1. Appropriate timing and frequency of irrigation
2. Adequate volume of water to apply
3. Efficient method of application
Soil factors
affects water holding capacity, water percolation
includes soil structure, texture and depth
Climatic factors
affects the rate of water losses through evaporation
& transpiration
includes temperature, length and intensity of
sunshine, relative humidity, wind movement
rainfall increases level of soil moisture
Plant factors
includes rooting characteristics, drought tolerance
and growth stages
Drought resistance – genetics
e.g. sorghum vs corn
Related to rooting characteristics: shallow rooted vs.
deep rooted plant
Perennial crops:
• Drought-tolerant ( siniguelas, cashew, mango, and
tamarind)
• Drought-susceptible (banana, lanzones, durian,
papaya, cacao)
Critical stages affected by water stress
Early vegetative growth/ establishment period
Flowering
Fruit setting
Fruit development
In many crops, application of irrigation water after a
brief period of drought can induce flowering e.g.
durian, rambutan, citrus, lanzones, coffee
Gravimetry
involves oven drying a sample of soil
and compute soil moisture content
Use of tensiometer
to measure the water potential
which is inversely related to amount of available
water
Measure the evapotranspiration rates
to determine values of evapo-transpiration rates of the crops
over a short time intervals
use of evaporative pan* which can be installed throughout the farm
*circular metallic container with open top (120.7 cm diameter)
Observing visual symptoms on the plants
a. Temporary wilting/leaf rolling
b. Color of the foliage
Sandy
Appears dry but doesn’t form a ball
Loam
Somewhat crumbly but
particles hold together
Clay
Somewhat pliable, forms a
ball, but does not readily
form ribbon
Sand-cum-miniplot technique
After laying out the field, choose 2 to 3 hills on a representative
section of the field.
Dig pits (1 cubic meter volume). Add 5% sand to the soil and
return the mixture to each pit. Then, plant the seedlings
When soil moisture becomes limiting, seedlings planted in these
pits are expected to wilt 2-3 days ahead of others
This serves as indicator that it is time to irrigate the entire field
Surface irrigation systems
Furrow method
Flooding method
Basin Method
Sprinkler irrigation
Highly-pressurized water is
delivered through network
of pipes and comes out as
fine droplets
Drip system
Water is applied through network of pipes and comes out in the
form of drips
Drippers control the flow of water
Water is applied directly to the root zone in small amount and
continuously until desired wetting of soil is attained
Furrow method
Applied water seeps into side
and bottom of furrows to attain
desired wetting
Flooding method
Water is applied by
flooding the entire
field
Basin Method
Trees are irrigated individually
Solves most of limitations of ordinary flooding method
In this method, the water is applied to leveled field that
is bounded by dikes/ridges or check banks to stop
runoff.
Sub-surface irrigation systems
Water is applied below the soil surface (through the
underground system) and reaches plant root zone by capillary
movement
Sources of irrigation
1. River, stream, and lake
a. Pumping
b. Dam
2. Small farm reservoir or water impounding system (WIS)- structure to
collect rain and run–off water
3. Ground water
a. Open well
b. Tube well