1/74
Weeks 0-5
Diagenesis
“Alteration”
process of physical and chemical changes in sediments first caused by water-rock interactions, microbial activity, and compaction after their deposition.
Refers to the low-temperature, low-pressure changes—such as compaction, cementation, and recrystallization—that transform loose sediment into sedimentary rock over time.
Generally increase the resistance of rocks to chemical weathering
biogenesis
creation of materials or sediments (substances, minerals, and debris) by living organisms (biological processes assume leading roles in formation of rock/materials).
ex. limestone (CaCO3 rock), biogenic silica, biogenic calcium phosphate and calcium carbonate
lithosphere
crust and upper mantle of Earth
pedosphere
The terrestrial soil layer and surficial sediments that act as an Earth surface reservoir for bioessential nutrients and elements
hydrosphere
The global water domain (oceans, surface waters, groundwater) forming part of the Earth's surface environment alongside the atmosphere, biosphere, and pedosphere
biosphere
The global sum of living organisms and ecosystems at the Earth's surface that actively drive, transform, and recycle chemical substrates
biomineralization
The biological process through which living organisms secrete mineralized body parts, tissues, or skeletal hard parts (primarily calcium carbonate, silica/biogenic opal, and calcium phosphate) using bioavailable chemical elements
remineralization
respiration
[106(CH2O) 16NH31PO43–] + 138O2 → 106CO2 + 122H2O + 16NO3– + PO42– + 16H+
remineralization of organic matter via respiration
as carbon and nitrogen in the living organisms is largely reduced, while remineralized forms are virtually all oxidized, the remineralization of organic matter was coupled to the depletion of oxygen
photosynthesis (formation of organic matter using light as a catalyst)
aerobic:
106CO2 + 122H2O + 16NO3– + PO42– + 16H+ → [106(CH2O) 16NH31PO43–] + 138O2
In addition to reducing CO2 to organic matter, formation of organic matter by photoautotrophs requires reduction of nitrate to ammonia.
These two forms of nitrogen are critically important in helping to quantify new and export production (key concepts of the microbial loop)
New production
“all primary production associated with newly available nitrogen, for example NO3-N and N2-N”
In a confined system such as the mixed layer of the ocean, new production is therefore the portion of primary production supported by exogenous nitrogen inputs
Exogenous N inputs include:
Upward Deep-Ocean Flux & Upwelling: The vertical transport of deep-water nitrate NO3- into the euphotic zone via upwelling, storm events, or seasonal deep-water mixing In high-latitude and upwelling regions, this upward flux is the dominant source of new nitrogen
Biological Nitrogen Fixation (N2 Fixation): The conversion of dissolved gaseous dinitrogen N2 into bioavailable fixed nitrogen by specialized diazotrophic organisms, particularly cyanobacteria
Atmospheric Inputs: Atmospheric deposition of nitrate NO3- or ammonium NH4+entering the ocean surface via precipitation or dust/dry fallout
Riverine Inputs: Runoff and terrestrial nitrogen delivered by rivers into coastal and continental shelf waters
regenerated production
portion of primary production (90%) supported by recycled nutrients that are re-released internally within the surface ocean (euphotic zone) by heterotrophic respiration, excretion, and microbial decomposition
Unlike new production—which relies on externally supplied nutrients like deep-water nitrate NO3- or atmospheric inputs—regenerated production is fueled by reduced forms of nitrogen, primarily ammonium NH4+, urea, and amino acids excreted by zooplankton, microbes, and heterotrophs
Nitrate (NO3-)
primarily supplied exogenously from deep-water upwelling or mixing, fueling new production that can be exported out of the surface layer without depleting the ecosystem
Ammonium (NH4+)
re-released locally by microbial and zooplankton respiration, fueling regenerated production that stays within the surface recycling loop (microbial loop)

f ratio
fraction of total production accounted for by new production
A low f-ratio (e.g., f < 0.15 in oligotrophic open-ocean gyres like HOT or BATS) indicates a highly efficient recycling system where almost all productivity is regenerated and very little carbon sinks to depth
A high f-ratio (e.g., f > 0.5 in polar polynyas or nutrient-rich upwelling zones) indicates that large exogenous inputs of new nitrate drive high new production, yielding strong potential for organic carbon export to the deep ocean
we use nitrate (new production) and ammonium (regenerated production) in the f ratio as a proxy for carbon (using stoichiometry - Redfield ratio)
Over long temporal and spatial scales under steady-state conditions, new production supported by new nitrogen equals export production (f-ratio = e-ratio), making nitrogen uptake a direct proxy for organic carbon export to the deep ocean
This claim has many caveats
when redfield ratio doesn’t hold
nitrifcation in euphotic zone leads to miscounted new nitrogen
this usually ignores new nitrogen from N2 fixation which is especially important in oligotrophic gyres
e ratio
the ratio of export production (amount or rate of organic carbon physically transferred from the surface to the deep ocean interior) to total primary production
Under steady-state conditions averaged over appropriate space and time scales, the f-ratio equals the e-ratio
major bioessential elements
C, N, P, S, Si, K, and Ca
forcings
External biological, physical, or geophysical drivers and mechanisms that act on biogeochemical cycles across various spatio-temporal scales (e.g., temperature, wind, and rainfall at ecosystem scales; orbital variations, ocean circulation, and plate tectonics at geological scales)
reactive transport models
Numerical models that represent space and time continuously using a set of partial differential equations (expressing mass conservation) to simulate both the physical transport and detailed chemical transformations of chemical species over time
reservoir
refer to a collection of matter of a certain chemical type, within given physical and/or biological boundaries.
For example, a key reservoir in the carbon cycle is living biomass of marine biota.
flux
transfers matter from one reservoir to another. A flux into a reservoir is a source, a flux out of the reservoir is a sink.
combines physical transport and biogeochemical transformation processes
fluxes between reservoirs are not restricted to purely advective flows of matter
For example, the supply of silicic acid to the oceans by weathering of rocks on land may be represented by a flux linking the terrestrial rock reservoir to the marine dissolved silica reservoir
A large number of geological and environmental variables therefore affects the net flux from one reservoir to another. Different variables may dominate at different time-scales.
Different from volumetric exchange based on dimensions (different units)
sink
A flux out of a reservoir, or a process/location that removes matter from a given reservoir
source
A flux into a reservoir, or a process/location that supplies matter to a given reservoir
residence time
transit time
The mean time spent by a carrier fluid or chemical element inside a physically defined reactor or reservoir before exiting
expressed as volume divided by volumetric flow rate (t = V / Q), which equals turnover time under steady-state conditions
time = amount/exchange
Q= exchange rate of EITHER the inputs OR the outputs (must cancel eachother)
box model
A simplified modeling approach adapted from chemical engineering reactor concepts that discretizes a biogeochemical system into a finite number of discrete, internally homogeneous reservoirs linked by transfer fluxes
The two main tasks facing the developer of a biogeochemical box model is the definition of the reservoirs and the parameterization of the fluxes
turnover time
The characteristic renewal time scale of a reservoir mass relative to its removal rate, defined as tR=M/Fout, where M is the total mass in the reservoir and Fout is the total flux leaving the reservoir (sink)
Under steady-state conditions (where inputs equal outputs and total reservoir mass remains constant), turnover time coincides exactly with mean residence time
Outside of steady state, turnover time specifically tracks the replacement time of the current inventory relative to output fluxes, whereas residence time tracks the physical transit time of the carrier fluid or entering species
biological pump
the export of organic matter synthesized in the surface ocean (by phytoplankton) to the deep ocean, sequestering carbon
On short time scales, anthropogenic CO2 may be sequestered by the oceans via this pump
carbonate pump
Marine organisms, in particular calcifying algae, coccolithophores and foraminifera, also secrete calcium carbonate (CaCO3). Part of the calcium carbonate precipitated in the surface ocean sinks to the deep ocean, together with the organic carbon.
Together, the export fluxes of particulate organic carbon (POC) and particulate inorganic carbon (PIC) to the deep ocean represent about 10 Gt of carbon annually (1 Gt = 1015 g), of which 20–40% is under the form of CaCO3.
Thus, uptake of atmospheric CO2 by surface ocean waters depends on the proportion of biomass production carried out by calcifying organisms (mainly coccolithophorids), versus that by non-calcifying organisms (mainly diatoms).
gross photosynthesis
The creation of organic compounds from DIC by phytoplankton
net global photosynthesis
photosynthesis minus respiration
(net result of phytoplankton autotrophy and heterotrophy)
net global photosynthesis is equal to the burial rate of organic matter in sediments (because the earth surface environment is at (quasi-)steady state)
NPP (Net primary production): represents the total flux of organic carbon (and hence, energy) that an ecosystem can utilize for all other metabolic processes.
global respiration of the geosphere
Reverse reaction from photosynthesis)
total oxidative degradation of organic matter, either through weathering of sedimentary organic matter or the oxidation in the atmosphere of reduced carbon gases derived from the degradation of organic matter during late diagenesis, metamorphism or magmatic activity
Redfield ratios
The ratios at which these elements or compounds are used during marine metabolism
106:16:1
106 Carbon
16 Nitrogen
1 Phosphorus
redox reaction
oxidation-reduction reaction
oxidation - atom loses electrons (reducing agent)
reduction - atom gains election (oxidizing agent)
OILRIG
ex. photosynthesis: 6CO2 + 6H20 → C6H12O6 + 6O2
2 reactions occur here
light reaction: 2H2O → O2 +4H (oxidation - O is oxidized, losing electron)
dark reaction: CO2 →(CH2O) (reduction - C is reduced, gaining electron)
conservative elements
elements in seawater that have constant concentration : salinity ratios
not greatly affected by processes other than precipitation and evaporation (the same processes that control salinity in the ocean)
Most of the major ions are conservative (exceptions are Sr2+, HCO-3 and CO2-3 ) and these ions make up more than 99.4% of the mass of dissolved solids in seawater.
bioactive elements
elements in seawater that have concentration versus depth profiles characterized by surface water depletion and deep water enrichment caused by plant consumption in the euphotic zone and release at depth when the biological material dies, sinks and degrades.
Exs:
nutrients required for phytoplankton growth (P, NO-3, HCO03)
O2 consumed during respiration
shell constituents (Si, Ca)
trace metal used for plankton growth (Fe) or incorporated in plankton for some other reason (Cd, Zn)
HNLC (High Nutrient Low Chlorophyll) Regions
In large areas of the open ocean—most notably the Southern Ocean, the Equatorial Pacific, and the Subarctic Pacific—significant quantities of surface nitrate and phosphate remain unconsumed by marine life.
In these High-Nutrient, Low-Chlorophyll (HNLC) regions, primary productivity is limited because iron is in short supply.
Aeolian transport of mineral dust from land deserts serves as the dominant natural source delivering iron to these remote surface waters
ocean circulation and THC
deep water formation and start of AMOC: higher salt content of North Atlantic (due to increased water temps and evaporation) surface waters gives them greater densities at any given temperature than North Pacific waters. This is the main reason for massive downwelling, all the way to the ocean bottom, in the North Atlantic where the water is cold and salty, but no deep water formation in the North Pacific.
Thermohaline circulation: Below 1000–1500 m, temperature gradients are small and Sverdrup transport is weak. In this region large-scale transport is caused by thermohaline circulation. The overall water balance of the ocean below 1500 m consists of sinking of water in the polar regions, which is balanced by upwelling and return flow from ocean depths to the surface
absorbed elements
elements in seawater whose depth profiles are reversed from those in the bioactive category (concentration higher at surface and decrease with depth as elements are absorbed to particles that fall through the ocean)
Exs: Mn and Al
gases
elements dissolved in seawater that are either chemically inert (the noble gases: He, Ne, Ar, Kr, Xe, Rn) or bioactive (e.g. O2 and CO2)
conservative behavior in this case means that the concentrations in seawater are at or near equilibrium (gas saturation) with their respective atmospheric gas concentrations rather than having a constant ratio with salinity.
equilibrium function of temperature (cold water holds more gas at equilibrium)
Because temperature decreases with depth in the ocean, inert gas concentrations increase with depth
ekman transport
Friction on the ocean surface drags the surface water in the direction of the wind. The resulting mean flow in the upper 10–100 m, however, is not in the direction of the wind, but 908 to the right of the wind in the Northern Hemisphere and 908 to the left of the wind in the Southern Hemisphere
This deviation in flow is due to the coriolis force (not actually a true force, but used to compensate for the fact that all measurements and forces are made relative to a rotating Earth)
ekman pumping
surface water flow converges from the north and south, causing waters to ‘‘pile up’’ and creating a location of general downwelling
ex. subtropics (30deg)
ekman suction
divergence in flow that is ‘‘filled in’’ by upwelling of water from below
sverdrup transport
As the water flows from the ‘‘hills’’ to the ‘‘valleys’’ it is also influenced by the Coriolis force, creating largescale gyre transport that is felt to much greater depths.
Ex. Northern hemisphere subtropical convergence zone: as water flows downhill from its high level in the center of the gyre it is forced to the right by the Coriolis force, creating a large-scale anticyclonic gyre (clockwise flow in the Northern Hemisphere)
oxygen light-dark method
net O2 difference in the water column provided a measure of the net synthesis of new organic matter
method used to measure the productivity of very small phytoplankton (nanophytoplankton) and was sensitive enough to measure plankton productivity, at least in coastal ocean waters, with acceptable precision and accuracy
radiocarbon method
use of the radiotracer, 14C, to quantify the fixation of carbon by natural plankton assemblages in short-term (hours) incubations
the radiocarbon method completely replaced the oxygen method for measuring oceanic primary productivity
but this method also has problems: could be something closer to gross rather than net photosynthesis.
chlorophyll concentration method
satellite measurements to derive oceanic chlorophyll concentrations, which these pigments can be used as a proxy for global primary productivity.
This approach forms the basis for the contemporary estimates of oceanic NPP using ocean color sensors on SeaWiFS, MODIS and other Earth observing platforms.
Although there are different models for estimating global NPP, all models basically use satellite-based estimates of phytoplankton chlorophyll biomass and incident solar photosynthetically available radiation (400–700 nm) to derive a vertically integrated estimate of NPP for each pixel set
BUT, chlorophyll does not always correlate to phytoplankton biomass and different species contain different levels of chlorophyll
microbial loop
accounts for the fate of most of the organic matter in the oceans (90%) and also called regenerated production, as organic matter produced by photoautotrophs is regenerated by heterotrophic respiration
characterized by the respiration of organic matter (recycling nutrients for use by PP) and the conversion of organic carbon into recalcitrant (non-labile) carbon (DOC) → long term storage of carbon (pool)
loop is very active in surface waters (although not confined to the surface)
export production vs biological pump
Export production is the material FLUX (how much carbon exits the surface layer) while biological pump is the SYSTEM (mechanism that uses export production to transport carbon to depth and regulate global climate)
the sinking flux of organic matter that is said to be ‘exported’ from the surface waters (the fraction of NPP that is exported to ocean interior)
oxidation of organic matter in the ocean interior, rather than in the surface waters, enriches the interior of the ocean with inorganic carbon. Because the waters from the ocean interior are not in contact with the atmosphere, the enrichment effectively removes carbon dioxide from the atmosphere. Indeed, sinking organic matter and its subsequent regeneration to inorganic carbon in the ocean interior effectively ‘pump up’ the inorganic carbon content in the ocean to values that are significantly higher than predicted from equilibration with the atmosphere.
biological pump: broader oceanographic mechanism by which surface photosynthesis fixes inorganic carbon, exports organic carbon to depth, and remineralizes it back to inorganic carbon in the ocean interior
NPP from the ocean surface sinks and is regenerated in the interior
Perturbations in the food web can change the intensity of the biological pump
Types of perturbations include seasonal changes in irradiance, wind mixing events, and seasonal or pulsed inputs of nutrients (including iron) due to changes in nutricline depth, upwelling and atmospheric events.
When in a perturbed state, the mechanisms controlling production and consumption of organic matter are decoupled, resulting in an accumulation of biomass and an increase in export flux.
EP: transfers from the surface waters to the interior of the ocean by processes such as particle sinking, advection or diffusion of dissolved organic matter (DOM), and vertical migration of zooplankton
Export production from the primary system, the photosynthetic zone, will be equal to new production, although they may, or in most cases will, be separated both in space and time
oceanic methane paradox
methane concentrations in near-surface waters throughout much of the global ocean are 5–75% supersaturated with respect to the atmosphere, implying local methanogenesis and a net flux from the ocean to the atmosphere
BUT the surface ocean is also saturated or slightly supersaturated with respect to atmospheric oxygen, which should not favor methanogenesis
The paradox: near-surface marine waters contain surprisingly high levels of methane (methane supersaturation) despite being oxygen-rich and fully saturated
Phosphonate-Methane Hypothesis
MPn (Methylphosphonate) cycling (its coupled production and decomposition) is a pathway for the aerobic formation of methane in marine ecosystems.
In Escherichia coli, Pseudomonas and many other bacteria, MPn can be used as a sole source of P during aerobic growth. During MPn utilization, methane is quantitatively released, whereas P is incorporated into new cell mass.
The aerobic formation of methane in the sea may represent the ‘missing’ source term needed to reconcile the observed methane supersaturations that sustain a net flux of methane from the ocean to the atmosphere
The Methane Requirement: Physical calculations show that sustaining the observed ocean-to-atmosphere methane flux requires a surface methane production rate of ~2.3 µmol m⁻² d⁻¹.
1-to-1 Stoichiometry: When microbes break down MPn to harvest its phosphorus for growth, methane is released as a direct byproduct at a 1:1 ratio.
The Takeaway: MPn does not need to be a major phosphorus source for the entire marine ecosystem to explain oceanic methane. If microbes route just 1% to 2% of their organic phosphorus intake through MPn, the resulting byproduct methane completely accounts for the observed supersaturation in surface waters.
Influence of Nitrogen Fixation on Phosphonate-Methane Pathway
nitrogen-fixing cyanobacterium possess genes (such as phnD and phnJ) that encode components of the C–P lyase pathway required to break C–P bonds and convert methylphosphonate (MPn) into methane. When incubations were supplied with MPn alone, significant methane production was observed; when inorganic phosphate was provided instead, no methane was produced
Triggered by Chronic Phosphate Stress
Under phosphate-replete conditions, Trichodesmium suppresses phosphonate gene expression. However, when inorganic phosphate falls to critically low levels, Trichodesmium upregulates its C–P lyase pathways to harvest phosphorus from organic compounds like MPn, releasing methane as an unintended byproduct
Nitrogen Fixation Fueling Phosphorus Demand
As a diazotroph, Trichodesmium converts atmospheric nitrogen into biologically usable nitrogen, relieving nitrogen limitation in surface ocean waters
Because the breakdown of MPn requires fixed nitrogen and carbon to build biomass, nitrogen availability directly regulates the rate of MPn utilization. By supplying new fixed nitrogen to the surface ecosystem, nitrogen-fixing microorganisms enhance overall microbial growth, driving higher demand for phosphorus and accelerating the aerobic decomposition of MPn into methane
Thus: MPn decomposition—and the resulting methane production—is strictly regulated by inorganic phosphate availability (low phosphate = more MPn decomposition)
Nitrogen fixers like Trichodesmium fuel the demand for phosphorus by driving microbial growth. However, they only turn to MPn—and generate byproduct methane—as a fallback strategy when inorganic phosphate drops to critically low levels
Stoke’s Law in sinking rate
Sverdrup’s critical depth theory vs Dilution-decoupling theory
conservative elements
controlled by physical properties (don’t change alot with biological interactions)
demonstrated by constant vertical profiles with depth (not chaning
ex. Na
ex. S - looks conservative becuse sulfate reduction only occurs when O2 is low, and S is very abundant in ocean to see huge difference with depth (S in pre-oxygen ocean has a very different profile)
Non-conservative elements
physics AND biology influences concentration/distribution
demonstrated by curved vertical profiles, increasing or decreasing with photic zone, mixed layer depth, oxygen minimum zone, and associated biological reactions (photosynthesis takes up P but releases O)
ex. Nitrogen
ex. Fe - mineral essential for photosynthesis and respiration- used at surface
law of conservation of mass
mass is conserved through time and space
law of conservation of energy
energy cannot be created nor destroyed, only trasnformed (1st law thermodynamics)
all systems move toward increasing entropy (2nd law thermodynamics)
ex. respiration is spontaneous (favored) because it releases energy (therefore increasing entropy), while photosynthesis requires energy (from sun)
electroneutrality (charge balance)
in seawater chemistry (and natural systems), positive and negative charges have to equal (must cancel out —> calculating alkalinity with equivalence)
pCO2
Partial pressure of gaseous carbon dioxide, representing its contribution to the total atmospheric pressure.
fCO2
Carbon dioxide fugacity, representing its effective partial pressure after correcting for non-ideal gas behavior, typically 99.5% to 99.7% of pCO2.
[CO2∗]
The combined concentration of dissolved gaseous CO2 and non-ionized carbonic acid (H2CO3), making up approximately 0.5% of marine dissolved inorganic carbon (DIC).
Henry's Law (in marine aquatic chemistry)
The equilibrium relationship describing gas exchange between the atmosphere and surface water (fa=fw), where the solubility coefficient KH corresponds to K0 formulated by Weiss (1974).
H+
Hydrogen ion or proton that governs acidity, pH level, and chemical speciation in seawater.
HCO3−
Bicarbonate ion, representing the dominant dissolved inorganic carbon species in seawater (approximately 85% of DIC).
CO32−
Carbonate ion, constituting approximately 15% of dissolved inorganic carbon in seawater and essential for calcium carbonate mineral precipitation.
Dissolved Inorganic Carbon (DIC or TCO2)
The sum of all dissolved inorganic carbon chemical species in seawater, calculated as: [CO2∗]+[HCO3−]+[CO32−].
Titration Alkalinity (TA)
The total acid-neutralizing capacity of seawater, defined as the excess of proton acceptors over proton donors.
Carbonate Alkalinity (CA)
The portion of seawater alkalinity contributed specifically by carbonate and bicarbonate ions, expressed as: [HCO3−]+2[CO32−].
Dissolved Organic Carbon (DOC)
The fraction of organic carbon dissolved in seawater that passes through a fine membrane filter, acting as a major oceanic reservoir of reduced carbon.
Revelle Factor
The buffer capacity metric defined as the fractional change in pCO2 relative to the fractional change in dissolved inorganic carbon (DIC), quantifying resistance to ocean acidification.
Rain Ratio Parameter
The fraction of exported inorganic particulate carbon relative to total carbon export, defined as: POC export+CaCO3 exportCaCO3 export.
solubility of gas
Equilibrium, or gas saturation, is primarily a function of temperature (cold water can hold more gas at equilibrium), but salinity also plays a role (saltier water can hold less gas at equilibrium)
calcium carbonate counter pump
In the surface ocean, the production of calcareous shells consumes alkalinity and release CO2 as biproduct
Stokes law and implications for sinking rate (transport efficiency)
According to Stokes’ law, the sinking rate of a particle is directly proportional to its density difference from the ambient fluid.
Assuming that the average densities (g cm 3) of calcite and opal are c. 2.5, and that organic matter and seawater have densities of c.1.1 and c. 1.0, mineral and organic matter will have relative density differences from water of c. 1.5 and c. 0.1, respectively. Under these conditions, a pure inorganic particle will sink 15 times faster than an organic particle of the same dimensions.
An illustration of the effect on sinking organic matter using a simple Stokes’ law settling model (Fig. 6.10) indicates that ballast minerals proportionately deepen the respiration profile in the water column.
Martin Curve and OM transport efficiency
Particles sinking out of the surface ocean already contain on average 30–40 wt% of mineral matter —> two major implications for the transport efficiency of organic carbon (and other bioactive elements) into the interior ocean
The organic components of marine particles should sink much faster than organic particles not accompanied by mineral matter. (CaCO3 and SiO. increase transport efficiency) — STOKES LAW
A fraction of the organic matter in marine particles may be physically protected by mineral armor (ballast), and thus only be respired when the associated mineral is dissolved.
Martin curve arbitrarily sets the amount of organic matter to be protected from degradation to 15% of the total.
Case 1 most closely matches measured data: Exposed and protected OM with ballast dissolution
Key point:
Without protection, organic matter would be oxidized in the upper 2000 m of the water column. Thus, physical protection may explain the characteristic hyperbolic form of POC fluxes and its asymptotic approach to non-zero values at depth.
