Flashcards ISCI 1A24 Earth Sci Fall Midterm Review

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/34

encourage image

There's no tags or description

Looks like no tags are added yet.

35 Terms

1
New cards

What is our current understanding of the formation of the solar system?

4.5-4.6 billion years ago, a dense cloud of interstellar gas and dust collapsed (possibly due to a supernova shockwave), forming a spinning, swirling disk of material (solar nebula). At the center, hydrogen fused into helium, creating the Sun. Matter farther out formed planetesimals, dwarf planets, and large moons; smaller pieces became asteroids, comets, and meteoroids. Planets form routinely as part of star formation.

2
New cards

On what scientific evidence is our understanding of solar system formation based?

Meteorites (fragments of asteroids, uniform age 4.53-4.58 Ga, ~4.54 Ga); meteorite craters (e.g., Manicougan Crater, Quebec, 214 Ma; Meteor Crater, Arizona, 50 ka); Canada's largest meteorite (167.8 kg, near Madoc, Ontario); asteroid belt samples (many contain chondrules); carbonaceous chondrites (contain ~5% carbon compounds including amino acids, building blocks of DNA); observations of rotating disks of gas and dust around new stars.

3
New cards

How do we get information about planetary age and composition?

Meteorites (uniform age ~4.54 Ga); isotopic dating; mass spectrometers; remote sensing; seismic waves; volcanoes and diamonds (mantle composition); Moon samples (Lunar Highlands

4
New cards

How and when did the Earth form?

~4.5 billion years ago from the solar nebula. Accretion converted gravitational potential energy to kinetic then thermal energy. Differentiation caused dense materials (Ni, Fe) to sink to the core and light materials (Si, O) to rise to the crust. Radioactivity added thermal energy. Earth became layered by density: core (inner solid, outer liquid), mantle, crust. Earth is a differentiated planet.

5
New cards

How did the Moon form?

Giant Impact Theory: A proto-planet (Theia) ~10% of Earth's mass hit Earth ~4.45 Ga. Ejecta from the impact formed the Moon. This thinned Earth's atmosphere, allowing cooling and solidification of the surface.

6
New cards

How do other planets in the solar system differ from Earth?

Inner planets (Mercury, Venus, Earth, Mars) are terrestrial, rocky, and differentiated. Mercury: heavily cratered, 4,880 km diameter, 5.427 g/cm³ (heavily cratered due to little dynamic process like erosion). Venus: similar to Earth, 12,104 km diameter, 5.243 g/cm³. Mars: crust, core, similar composition to Earth. Outer planets (Jupiter, Saturn, Uranus, Neptune) formed from gases (H, He, water, methane, ammonia); have lighter elements (molecular hydrogen) and heavier elements (metallic hydrogen, core).

7
New cards

What is our current understanding of the internal structure of the Earth?

Core: radius ~3,500 km; inner solid, outer liquid; Ni/Fe (metallic). Mantle: radius ~2,900 km; solid but can flow; O, Si, Fe, Mg (lighter elements). Crust: oceanic (5-12 km, 3.0 g/cm³, basaltic) and continental (up to 75 km, 2.7 g/cm³, granitic). Lithosphere (rigid crust + uppermost mantle), asthenosphere (soft, flows), Moho (crust-mantle boundary), ULVZ (core-mantle boundary).

8
New cards

On what scientific evidence is our understanding of Earth's internal structure based?

1) Earth Materials: Asteroid dating gives conditions of earliest ages of solar system. 2) Drilling: Deepest hole ~12 km (took 15 years to dig). 3) Seismic data: Seismic reflection and refraction; P-waves (pass through solids and fluids) and S-waves (only solids, not fluids — indicates liquid outer core). Volcanoes (magma composition); diamonds (form >150 km depth, >1500°C, >55 kilobars, in kimberlite pipes); LITHOPROBE (Canadian Shield seismic reflection); home seismometers.

9
New cards

What material can provide information about the mantle?

Volcanoes (molten magma/lavas); diamonds (high-pressure carbon, form >150 km depth, found in kimberlite pipes, most ~3.3 Ga, no newer or older diamonds); kimberlite pipes; xenoliths; ophiolites.

10
New cards

What is the process of differentiation?

Dense materials fall to the core, converting gravitational potential energy into thermal energy; light materials rise to the surface. Earth melts, minerals mix, iron-nickel settles toward the center, forming a differentiated Earth (core, mantle, crust). All inner planets have undergone differentiation.

11
New cards

What is LITHOPROBE?

A multidisciplinary project investigating the structure and composition of the Canadian Shield using seismic reflection methods ("dancing elephants" — enough to create a geological map that displayed depths). It provided data on crustal structure and the Canadian Shield.

12
New cards

How do we date geological materials and events?

Isotopic dating: measure radioactive elements and their unique daughter products (e.g., ²³⁸U→²⁰⁶Pb, ⁴⁰K→⁴⁰Ar). Measure parent/daughter ratio, calculate initial parent, use known half-life to calculate age. Common pairs: C-14→N-14 (5,730 yr, up to 50,000 yr); U-235→Pb-207 (710 Myr); K-40→Ar-40 (1.3 Gyr); U-238→Pb-206 (4.5 Gyr); Th-235→Pb-208 (14 Gyr); Rb-87→Sr-87 (47 Gyr).

13
New cards

What assumptions are made in radiometric dating of rocks?

The rock has remained a closed system (no loss/gain of parent or daughter isotopes); no daughter product initially present; decay rate has remained constant; measurements are accurate; rock has not been heated or altered (which could reset the clock); for K-Ar, no initial argon; for C-14, sample must contain wood, bone, or carbonate and organism must have been alive.

14
New cards

What are the best isotopes to use for dating geologic events?

Those commonly found in rock-forming minerals (e.g., ⁴⁰K in micas, feldspars, hornblendes) and those with a unique daughter product (e.g., ²⁰⁶Pb only from ²³⁸U; ⁴⁰Ar only from ⁴⁰K). Best rocks: igneous rocks (lava flows, magma solidifies) that solidified in a chemical formula; easy to date. Metamorphic rocks: ???. Sedimentary rocks: difficult to date (from different time periods).

15
New cards

Why are zircons commonly used in geochronology?

Mineral ZrSiO₄; common in igneous rocks; hard and resistant to erosion; contains trace uranium and thorium; datable by U-Pb and fission track techniques; oldest material dated on Earth is a zircon crystal (4,404 ± 8 Ma) from Australia; high closure temperature retains radiogenic Pb.

16
New cards

Why is the Earth's surface constantly changing?

Earth is a dynamic planet with two main energy sources: 1) Internal (or geothermal heat) — melts rocks, makes volcanoes, moves continents. 2) External (solar) heat — creates climate and weather, controls erosion and deposition. Plate tectonics creates and destroys crust, builds mountains, opens ocean basins, and causes earthquakes and volcanoes.

17
New cards

Who were the scientists primarily responsible for the development of the plate tectonic theory?

Alfred Wegener (1912) — continental drift, proposed Pangea (a supercontinent), suggested continents moved by plowing through sea floor. Harry Hammond Hess (1962) — sea floor spreading, sea floor created at Mid-Ocean Ridges and reabsorbed at trenches. Others conducted magnetometer surveys confirming magnetic anomalies.

18
New cards

What is our current understanding of plate tectonics and on what scientific evidence is this based?

Earth's surface is divided into large plates that move (cm/yr). Divergent boundaries (plates move apart, new crust, basaltic volcanism, shallow earthquakes), convergent boundaries (plates move together, subduction, volcanic arcs, mountain building, shallow to deep earthquakes), transform boundaries (plates slide past, shallow earthquakes). Evidence: glacial deposits of Gondwana; similar rocks/fossils on both sides of the Atlantic (Lystrosaurus, Glossopteris, Cynognathus, Mesosaurus); mid-ocean ridges; sea floor spreading; paleomagnetism; age of oceanic lithosphere; seismic activity; GPS; deep-sea drilling; ophiolites.

19
New cards

What is paleomagnetism and how has it been used to validate the theory of plate tectonics?

Paleomagnetism is the record of Earth's magnetic field in rocks. Magnetic minerals (e.g., magnetite) align with the field when the rock solidifies or lithifies. Magnetic reversals (field flips) are documented for the past 330 million years (last reversal 780,000 years ago; takes 1,000-8,000 years). Magnetometer surveys of the ocean floor revealed symmetric magnetic anomaly stripes on each side of mid-ocean ridges, matching the pattern of magnetic reversals. This confirmed sea floor spreading and plate motion.

20
New cards

How old is the sea floor?

Youngest at Mid-Ocean Ridges (currently forming). Oldest ~280 million years (from age of oceanic lithosphere maps; Muller et al., 2008). Exception: 340-million-year-old ocean crust preserved beneath the eastern Mediterranean (Herodotus Basin). Most sea floor is less than 200 million years old because it is constantly created at MORs and destroyed at subduction zones.

21
New cards

What processes operate at divergent plate boundaries?

Plates move away from each other. Processes: thinning, rifting, extension; volcanism (basaltic lavas); shallow focus earthquakes. Creates new ocean basins and new oceanic crust. Examples: Red Sea (spreading ~1 cm/yr each side), East African Rift Valleys, Mid-Atlantic Ridge, Iceland (Thingvellir, Krafla).

22
New cards

What processes operate at convergent plate boundaries?

Plates move toward each other. Oceanic-continental: subduction, deep trenches, volcanic arcs (Cascades, Andes). Ocean-ocean: denser plate subducts, deep trenches, island arc volcanoes (Japan, Philippines, Mount Pinatubo). Continental-continental: crust crumples, mountain ranges (Himalayas), obduction. Processes: subduction, partial melting, andesitic/rhyolitic volcanism, mountain building, shallow to deep earthquakes. Examples: Pacific Ring of Fire, Andes, Himalayas, Cascades.

23
New cards

What processes operate at transform plate boundaries?

Two plates slide horizontally past each other. Associated with shallow focus earthquakes. Examples: San Andreas Fault (~1,200 km long); often link sections of divergent or convergent margins.

24
New cards

Why do we need to know the plate tectonic history of North America?

North America consists of many small micro-continents (provinces) joined together. Joints (sutures) are areas of weakness in the crust — potential sites for future earthquakes. Example: Hamilton lies close to the old suture zone in the Shield (CMBBZ), a weakness and potential earthquake site. The N. American plate is moving westward (2.7 cm/yr), generating stresses. Understanding this history helps assess seismic hazards in eastern North America.

25
New cards

Why do we need to know the plate tectonic history of South America and other parts of the Global South?

The Andes Mountain Range formed by subduction of the Nazca Plate under the South American Plate, rich in mineral deposits (copper, silver, gold). 2022 copper production: Chile #1, Peru #2. 2022 silver production: Mexico #1, Peru #3, Chile #4. Porphyry Cu deposits associated with subduction zones. Earthquake and tsunami hazards: Venezuela 2026 earthquakes (M7.5, M7.2, 3,535 deaths, ground displacement up to 60 cm); Haiti 2021 (M7.2), 2010 (M7.0); Morocco 2023 (M6.8); Mexico 2022 (M7.6). Understanding tectonics helps assess hazards, manage risk, and locate resources.

26
New cards

What is an earthquake?

The sudden break or movement along a fault when strain exceeds the strength of rock, releasing energy as seismic waves. Focus: point of initial movement on a fault. Epicenter: point on Earth's surface directly above the focus. Fault: a planar fracture or discontinuity in rock with significant displacement. Stress causes strain; when strain > strength, sudden break/movement occurs.

27
New cards

Where do most earthquakes occur and why?

Most occur along plate boundaries (faults) because these are zones of weakness where stress accumulates due to plate motion. Concentrations: Circum-Pacific Belt (Ring of Fire, ~80% of earthquakes), Mediterranean-Himalayan Belt, Mid-Ocean Ridges (divergent, shallow), Transform Boundaries (e.g., San Andreas). Intraplate earthquakes occur in stable regions (eastern North America) due to ancient suture zones and stresses. Examples: Haiti, Venezuela, Morocco, Mexico.

28
New cards

How are seismic waves generated and what are the different types?

Generated when strain > strength of rock, causing sudden break/movement on a fault, releasing energy as seismic waves. Body waves: P-waves (primary, compressional, fast 4-7 km/s, parallel vibration, pass through solids and fluids, arrive first) and S-waves (secondary, shear, slower 2-5 km/s, perpendicular vibration, only solids, arrive after P). Surface waves: Love waves (horizontal, side-to-side, perpendicular vibration, slow, most damage) and Rayleigh waves (rolling, very destructive, ocean-like motion).

29
New cards

How are earthquake epicentres located?

Use travel-time curve to determine distance to epicentre from S-P time interval. Need three or more stations (triangulation). Draw circles with radius = distance around each station; intersection = epicentre. Example: Denver, Montreal, Lima; S-P intervals of 3, 8, 12 minutes; distances 2,000, 5,300, 9,000 km; circles intersect at epicentre. Focus depth: shallow

30
New cards

How do we determine the size of an earthquake?

Intensity (Modified Mercalli Scale I-XII): measures damage based on observed effects; variable over area; depends on size, depth, distance, local conditions. Magnitude (Richter Scale): measures energy released; amplitude of seismogram squiggles; base-10 logarithmic; each unit increase = 10x ground displacement, 32x energy. Magnitude calculated from rock strength, fault rupture area, and rock displacement. Examples: Chile 1960 (M9.5), Alaska 1964 (M9.2), Kobe 1995 (M7.2), Northridge 1994 (M6.7).

31
New cards

What hazards are caused by earthquakes?

Ground shaking (collapse of structures); surface faulting; landslides (San Fernando Valley 1994, Hokkaido 2018, El Salvador 2001, Ancash 1970); liquefaction (soil flows like liquid, buildings tilt/sink; Niigata 1964, Christchurch 2011, Kobe 1995); tsunamis (displacement of sea floor, long low waves, hit shore as large fast waves, water rises 5-10 min; 2004 Indian Ocean, 2011 Tohoku); ground vibration amplification (Mexico City 1985, 6-15 story buildings damaged); fire, flooding, disease, economic disruption.

32
New cards

How can we tell if we are at risk of earthquakes in eastern North America?

Ancient suture zones from micro-continent collisions are areas of weakness in the crust — potential earthquake sites. Example: Hamilton lies close to the old suture zone in the Shield (CMBBZ). The N. American plate is moving westward (2.7 cm/yr), generating stresses. Seismic monitoring by Earthquakes Canada; historical earthquakes (Miramichi 1982 M5.8; Long Island 1884 M5.0; Charleston 1886 M7.3). Faults: Grenville Front Tectonic Zone, Alliston, Georgian Bay, Lake Huron, Lake Erie, CMBBZ, Central Gneiss Belt. Risk based on proximity to ancient faults, suture zones, and current stress patterns.

33
New cards

Can we predict earthquakes?

No, earthquakes cannot be predicted with current technology. We can only assess probability and hazard based on plate tectonic history, ancient suture zones and faults, current stress patterns, seismic monitoring, and historical records. Earthquake early warning systems can detect P-waves and send alerts before S-waves arrive (seconds to minutes). Forecasting provides long-term probability estimates (e.g., 30-year probability). Short-term prediction (days to weeks) is not currently possible.

34
New cards

Which areas of Canada are at risk from earthquakes?

West Coast (British Columbia): highest risk; Pacific, Juan de Fuca, Explorer, and North American plates; Cascadia subduction zone; San Andreas Fault; Queen Charlotte Fault; recent events: M5.5, M5.4, M4.9, M4.4, M4.3 near Port Hardy and Haida Gwaii. Eastern Canada: moderate risk; ancient suture zones; Grenville Front Tectonic Zone; Charlevoix Seismic Zone; Miramichi, N.B.; Southern Ontario; Southern Quebec; Gaspé Peninsula; recent events: M3.1, M2.9, M2.8, M2.3, M2.2, M1.6, M1.1. Northern Canada: Yukon, NWT, Nunavut; M4.1, M4.3.

35
New cards

What do we know about earthquakes in the Caribbean and the Global South?

Venezuela sits on the South American plate, adjacent to the Caribbean plate. Most earthquakes occur on or near plate margins. 2026 twin earthquakes (M7.5, M7.2) caused ground displacement up to 60 cm near Caracas and La Guaira; 3,535 deaths; 18,000 homeless. Haiti: Enriquillo-Plantain Garden fault zone, Septentrional fault zone; 2021 M7.2, 2010 M7.0. Morocco 2023: M6.8, 71 km SW of Marrakesh, 18.5 km depth; 1,000+ casualties. Mexico 2022: M7.6, 66,000 people felt very strong shaking. These regions face significant hazards due to tectonic activity, building codes, and population density.