1/32
Vocabulary practice flashcards covering hillslope classifications, processes, mechanics of mass movements, shear strength equations, factor of safety, mitigation engineering, and subsidence hazards.
Hillslope
The elevated land situated between valley bottoms.
Soil-Mantled Hillslope
A hillslope where the soil production rate is greater than or equal to the soil transport rate (erosion), characterized by soil covering bedrock, sufficient transportable material, downhill slope steepening, and prevalence in warm, humid climates.
Bedrock Hillslope
A hillslope where the soil production rate is less than the soil transport rate (erosion), featuring little to no soil or thin soil over bedrock; common in arid/semiarid regions (due to slow chemical weathering) and arctic/high alpine regions (due to glacial weathering).
Threshold Slope
A steep hillslope with a slope angle >25∘ (typically 30∘−40∘) and elevation >1000m, where mass transport and erosion are controlled by landsliding rather than slope angle.
Divergent Slope
A slope that is convex in profile and divergent in planform, causing water and material flow to diverge.
Convergent Slope
A slope that is concave in profile and convergent in planform, causing water and material flow to converge.
Planar (Straight) Slope
A slope characterized by a straight profile and planar planform where flow remains planar.
Rain-Splash
A hillslope process involving the detachment and movement of soil particles caused by raindrops impacting the ground with substantial force.
Soil Creep
The very slow downslope movement of soil or sediment driven by gravity.
Sheet-Wash
Unconcentrated overland flow moving across a slope surface.
Landslide
The translation of soil and/or rock along a failure surface or shear plane, occurring as a coherent mass whose parts remain connected.
Mass Wasting
The downslope movement of Earth materials where the moving mass is less coherent and its individual parts are not connected.
Shallow Mass Movement
Mass movement occurring along the soil-bedrock contact that involves surficial materials such as soil and saprolite, typically common on steep, soil-mantled hillslopes.
Deep-Seated Bedrock Failure
Movement of mass occurring along bedrock planes, commonly associated with geological structures such as faults, fractures, or joints.
Active Mass Movement
Currently moving landslide activity characterized by sharp scarps, tilted trees, sag ponds not connected to external drainage, and little to no soil development on depositional areas.
Inactive (Dormant) Mass Movement
A historically displaced landslide mass characterized by rounded scarps, unaffected trees, well-integrated drainage with few ponds, and soil development on depositional areas; capable of reactivation if conditions change.
Flows (Mass Movement)
Mass movements where internal shear occurs throughout the moving mass with no well-defined shear plane, disrupting the material continuously throughout the movement (e.g., earthflows, debris flows).
Slides / Slumps
Mass movements where failure occurs along a well-defined shear plane (rotational or translational), allowing the displaced material to move as coherent units and preserve relict structures.
Falls / Topples
Mass movements occurring along very steep faces such as cliffs or eroding stream banks, where rock or soil moves downward through the air.
Shear Stress (Fsh)
The driving force per unit area acting downslope, equal to the downslope component of the weight of the slope-forming material: Fsh=ρgzsin(θ).
Shear Strength (SS)
The internal resisting strength of slope-forming materials that counteracts shear stress and holds material in place on slopes via solid friction.
Cohesion (C)
The intrinsic strength of a material that arises from chemical bonds, interlocking of mineral grains, and electrostatic bonding.
Frictional Strength
The resistance to shear between mineral grains and surfaces, measured in terms of the angle of internal friction (ϕ).
Effective Normal Stress (σ′)
The normal gravitational stress acting on a plane minus the buoyant pore-fluid pressure: σ′=[ρ−(ρwm)](gzcos(θ)).
Coulomb Equation
The equation describing the total shear strength of slope materials: SS=C+σ′tan(ϕ).
Pore-Fluid Pressure
Pressure exerted by water in pore spaces that creates buoyancy, counteracts normal stress, and reduces the effective normal stress on a failure plane.
Factor of Safety (FS)
The ratio of resisting shear strength to driving shear stress (FS=FshSS), where FS>1 defines stable slopes and FS≤1 indicates unstable or failed slopes.
Slope Grading
A slope stabilization technique that reduces slope angle and increases stability by removing material from high elevations and placing it at the toe.
Benching
A slope mitigation method that cuts a series of steps or benches into a hillside to reduce the overall average slope gradient.
Retaining Wall
An engineered wall built to support the toe or face of a slope and physically prevent movement.
Subsidence
The very slow to rapid downward sinking of Earth materials into voids or depressions.
Sinkhole (Solution Pit)
A surface depression created by chemical weathering when acidic groundwater (containing carbonic acid) dissolves underlying soluble rock such as limestone (CaCO3).
Snow Avalanche
A rapid downslope movement of snow and ice.