1/37
Vocabulary practice flashcards based on the UNC CHEM 101L lab final review sheet, covering laboratory safety, calorimetry, stoichiometry, conductivity titrations, spectroscopy, and atomic transitions.
Incident Report Procedure
The standard lab protocol requiring a student to immediately report any accident to the TA and fill out an incident report.
Standard Laboratory Safety Practices
Essential rules for maintaining safety in the lab, including no running, no eating or drinking, and placing personal bags in cabinets.
Personal Protective Equipment (PPE)
Protective gear required in the laboratory consisting of eye wear, a lab coat, gloves, proper closed shoes, and full clothing coverage.
Density
The ratio of mass to volume (density=volumemass). As temperature increases, density decreases, producing a negative slope.
Independent Variable
The experimental variable that is directly manipulated or kept within the experimenter's control, such as temperature in Experiment 1.
Dependent Variable
The measured variable that responds to changes in the independent variable, such as density in Experiment 1.
Reactant
A starting chemical substance that participates in a chemical reaction, appearing before the yield arrow in a chemical equation.
Product
A substance formed as the result of a chemical reaction, appearing after the yield arrow in a chemical equation.
Dissolution
The physical process of breaking ionic or intermolecular bonds between solute particles and solvent molecules.
Solute
The component of a solution present in a smaller amount, typically a solid that is dissolved.
Solvent
The component of a solution present in the larger amount, typically a liquid that dissolves the solute.
Precipitate
An insoluble solid substance that forms and separates out of an aqueous solution as a result of a chemical reaction.
Calorimetry
An experimental technique used to measure the amount of heat energy evolved or absorbed during a physical or chemical process in a closed system.
Spectator Ions
Ions that appear in identical aqueous form on both the reactant and product sides of a complete ionic equation and are omitted from the net ionic equation.
Acid-Base Neutralization Reaction
A chemical reaction in which an acid reacts with a base to produce water and a salt, such as 2HCl(aq)+Mg(OH)2(s)→2H2O(l)+MgCl2(aq).
Endothermic Reaction
A process that absorbs heat energy from its surroundings, characterized by a decrease in temperature (Tfinal<Tinitial) and a positive enthalpy change (+ΔH).
Exothermic Reaction
A process that releases heat energy into its surroundings, characterized by an increase in temperature (Tfinal>Tinitial) and a negative enthalpy change (−ΔH).
Stoichiometry
The quantitative numerical relationships between the amounts of reactants and products in a balanced chemical equation, grounded in the conservation of matter.
Conductivity
The measure of a solution's ability to conduct an electrical current, expressed in Siemens (S), which decreases as the concentration of free ions in solution decreases.
Endpoint of Conductivity Titration
The titration stage reached when the measured electrical conductivity drops to a minimum, after which 4 to 5 additional titrant additions are recorded.
Gas-Forming Reaction
A reaction that generates an insoluble gas as a product, visible experimentally through the vigorous formation of bubbles, such as Zn+2HCl→ZnCl2+H2.
Combustion Reaction
A highly energetic oxidation-reduction reaction with oxygen, such as 2H2(g)+O2(g)→2H2O(g), which releases optimal energy at a 2:1 hydrogen-to-oxygen ratio.
Catalytic Reaction
A reaction whose decomposition rate is accelerated by a substance that is not consumed in the process, such as using catalase in yeast to speed up 2H2O2→2H2O+O2.
Thermochemistry
The branch of chemistry focused on studying the heat energy changes that accompany chemical reactions and physical changes of state.
Specific Heat
The quantity of heat energy needed to raise the temperature of exactly 1g of a substance by 1∘C.
Heat Capacity
The magnitude of heat energy flow that accompanies a given increase in temperature, which is dependent upon both the mass and chemical identity of the substance.
Hess's Law
The principle stating that if a reaction is the sum of two or more component reactions, the overall ΔH equals the sum of the ΔH values of those constituent reactions.
State Function
A property whose value depends entirely on the current state of the system and is independent of the pathway taken between reactants and products.
Beer's Law
The mathematical equation A=ϵbc, showing that absorbance (A) is directly proportional to molar extinction coefficient (ϵ), path length (b), and concentration (c).
Colorimetry
An instrumental method of quantitative analysis based on measuring the absorption of light passing through colored liquid solutions.
Transmittance
The fraction of incident light that passes completely through a sample relative to the light transmitted through a reference blank.
Molar Extinction Coefficient
A constant (ϵ) indicating how strongly an analyte absorbs radiation at a designated wavelength.
Stock Solution
A concentrated standard solution used to prepare various lower-concentration working dilutions that form a Beer's Law calibration curve.
Electronic Absorption
The electronic transition that occurs when an electron absorbs a photon of energy and moves from a lower ground state to a higher excited energy level.
Electronic Emission
The electronic transition that occurs when an excited electron drops from a higher energy level down to a lower level, releasing a photon of equivalent energy.
Balmer Series
The set of four distinct spectral lines visible in the optical region produced when an excited hydrogen electron drops from an upper level (n>2) down to n=2.
Rydberg Equation
The mathematical expression ΔE=constant×(nf21−ni21) used to calculate energy differences for transitions between quantum states ni and nf.
Enthalpy Change of Reaction (qrxn)
The total heat energy gained or lost by a reaction in Joules, defined in calorimetry as qrxn=−(qsoln+qcal).