Laboratory Equipment Flashcards

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/55

encourage image

There's no tags or description

Looks like no tags are added yet.

56 Terms

1
New cards

How does Quality Assessment (QA) differ from Quality Control (QC) in a laboratory?

Quality Assessment (QA) is an overarching framework that monitors all lab processes, equipment maintenance, and procedures, whereas Quality Control (QC) specifically tests analyzer and assay accuracy.

2
New cards

What is the primary function of test tubes in laboratory procedures?

Holding small volumes of liquids during chemical reactions, mixing, or centrifugation.

3
New cards

What procedure should be followed when centrifuging an odd number of sample tubes?

Prepare a balance tube filled with water to equal volume and place it directly across from the extra sample tube.

4
New cards

Name three essential elements of an equipment Quality Assessment program.

  1. Routine equipment maintenance schedules; 2. Performance checks (temperature/calibration logs); 3. Complete documentation of service and repairs
5
New cards

Why are disposable plastic tips used with micro-pipettes?

They prevent cross-contamination between specimens/reagents and protect the internal barrel of the micro-pipette.

6
New cards

What does the abbreviation "TC" printed on a pipette mean?

"To Contain" — the pipette holds the exact specified volume, requiring rinsing to recover the full amount.

7
New cards

What is the primary function of a volumetric flask?

Preparing precise, critical standard solutions to an exact specified total volume.

8
New cards

Examine the glass flasks shown below: Photo displaying two volumetric flasks and two Erlenmeyer flasks Which flask design is reserved for critical volumetric measurement?

Volumetric flasks (the flasks featuring narrow elongated necks with single etched calibration marks).

9
New cards

What does the abbreviation "TD" printed on a pipette mean?

"To Deliver" — the pipette is calibrated to dispense the specified liquid volume when allowed to drain naturally.

10
New cards

What is a micro-pipette?

A mechanical device designed to measure and dispense ultra-small liquid volumes measured in microliters ( meL\ me\text{L}).

11
New cards

What key safety rule applies to all laboratory refrigerators and freezers?

No human food, beverages, or personal items may ever be stored inside them.

12
New cards

Why is borosilicate glass frequently used for heating liquids in the laboratory?

It possesses high thermal resistance and withstands rapid temperature changes without cracking.

13
New cards

How often should temperatures of laboratory incubators and refrigerators be recorded?

Daily (typically documented every shift using calibrated thermometers).

14
New cards

Name three common types of plastic polymers used to manufacture laboratory plasticware.

  1. Polyethylene; 2. Polystyrene; 3. Polypropylene
15
New cards

What two criteria must be satisfied to properly balance sample tubes in a centrifuge?

  1. Tubes placed directly opposite each other must contain equal liquid weight and volume.; 2. Tubes must be placed in diametrically opposed rotor slots.
16
New cards

Why is stopping a spinning centrifuge rotor by hand strictly prohibited?

Manual braking causes physical injury, rotor wear, sample resuspension, and potential aerosol exposure.

17
New cards

What is the primary purpose of a laboratory pipette?

To accurately measure and transfer specific liquid volumes from one container to another.

18
New cards

What does the abbreviation OPIM stand for in laboratory biosafety?

Other Potentially Infectious Material

19
New cards

What instrument is used to verify the actual rotational speed (RPM) of a centrifuge rotor?

A tachometer

20
New cards

What safety rule must be observed before opening the lid of an operating centrifuge?

The centrifuge lid must remain locked until the rotor has come to a complete, unassisted stop.

21
New cards

What is the curved upper surface formed by a liquid inside a narrow container called?

Meniscus

22
New cards

What are the three primary functions of labware in a clinical laboratory?

  1. Storing reagents and specimens; 2. Preparing reagents and solutions; 3. Performing test procedures
23
New cards

What is labware in a clinical laboratory?

Containers and equipment made of glass or plastic used to store, prepare, or handle reagents and specimens during test procedures.

24
New cards

What is the primary operational mechanism of a laboratory centrifuge?

Spinning samples at high speeds to generate centrifugal force, separating mixture components based on relative density.

25
New cards

In the volumetric measurement setup shown below: Diagram showing a person reading the meniscus level on a volumetric flask Where must the observer's line of sight align relative to the liquid level?

The line of sight must align horizontally (at eye level) with the etched calibration line and the bottom of the meniscus.

26
New cards

Name five common types of centrifuges utilized in medical laboratories.

  1. Clinical centrifuge; 2. Microcentrifuge; 3. Serological centrifuge; 4. Refrigerated centrifuge; 5. Ultra-centrifuge
27
New cards

What is the primary function of a graduated cylinder?

Measuring liquid volumes across a continuous range of values with moderate accuracy.

28
New cards

What backup feature is critical for preserving reagents stored in temperature-controlled chambers during power failures?

Connection to an emergency backup generator system.

29
New cards

What document provides detailed, mandatory instructions for operating equipment and performing tests in a lab?

The Standard Operating Procedure (SOP) manual.

30
New cards

What is the primary function of an Erlenmeyer flask?

Mixing, swirling, or heating liquids for non-critical measurement tasks.

31
New cards

What general design feature indicates that glassware is intended for non-critical volume measurements?

The presence of multiple graduation markings along the container body.

32
New cards

How does a volumetric pipette differ from a graduated pipette?

A volumetric pipette has a single calibration mark for a fixed critical volume, while a graduated pipette has multiple markings for variable non-critical volumes.

33
New cards

How should an analyst position their line of sight when reading a liquid meniscus?

Directly level with the calibration mark at eye level to eliminate parallax error.

34
New cards

Why is mouth pipetting strictly prohibited in clinical laboratories?

It poses a severe risk of accidental ingestion or inhalation of infectious biological specimens or hazardous chemicals.

35
New cards

Which two performance parameters require routine Quality Assessment (QA) verification on centrifuges?

  1. Rotational speed (RPM); 2. Timer accuracy
36
New cards

What structural difference distinguishes an Erlenmeyer flask from a volumetric flask?

An Erlenmeyer flask has a conical body with multiple graduation lines, whereas a volumetric flask has a pear-shaped body, a long narrow neck, and a single etched line.

37
New cards

What factor primarily determines whether a piece of labware is reusable or disposable?

The material, unit cost, and intended usage (e.g., thin plastic test tubes are disposable, while heavy borosilicate glass beakers are cleaned and reused).

38
New cards

Why should liquid-filled glassware never be raised above eye level when adjusting or reading volume?

Raising liquid containers above eye level creates a severe risk of splashing or spilling chemical/biohazardous liquids onto the eyes and face.

39
New cards

What general design feature indicates that volumetric glassware is intended for critical measurements?

The presence of a single, precise etched calibration mark on the neck or body.

40
New cards

Name three common types of glass used to manufacture laboratory glassware.

  1. Flint glass; 2. Borosilicate glass; 3. Quartz glass
41
New cards

What immediate procedure must be followed if a tube breaks inside a running centrifuge?

Turn off power, keep lid closed to allow aerosols to settle, put on appropriate PPE, and clean/disinfect the rotor and chamber according to biohazard spill SOP.

42
New cards

Name five standard types of liquid container labware found in a clinical laboratory.

  1. Bottles; 2. Test tubes; 3. Beakers; 4. Graduated cylinders; 5. Flasks
43
New cards

In the centrifuge loading diagram below: Diagram illustrating four centrifuge rotor loading patterns A, B, C, and D Why is arrangement D classified as an incorrect tube position?

Arrangement D is asymmetrical; one tube lacks a balancing tube placed directly opposite across the central axis of the rotor.

44
New cards

What is the most crucial physical requirement when loading tubes into a centrifuge rotor?

The rotor load must be symmetrically balanced in both tube weight and placement.

45
New cards

What is the primary clinical advantage of using a refrigerated centrifuge?

It maintains a regulated low temperature during centrifugation to preserve heat-labile analytes and cell integrity.

46
New cards

What cardinal rule governs clinical laboratory recordkeeping and compliance?

"If it was not documented, it did not happen."

47
New cards

Name four primary categories of safety hazards present when operating laboratory equipment.

  1. Exposure to blood or OPIM (biological hazards); 2. Electrical hazards; 3. Hazardous chemical reagents; 4. Moving mechanical instrument parts
48
New cards

What is the primary function of an autoclave in a laboratory?

Sterilizing reusable equipment and decontaminating infectious waste using high-temperature saturated steam under pressure.

49
New cards

How do lab personnel confirm that an autoclave run successfully achieved sterilization conditions?

By inspecting chemical indicator strips/tape or biological spore indicators that change color when target temperatures and pressures are met.

50
New cards

What are the main laboratory applications for beakers?

Mixing solutions, holding liquids, and making non-critical volume estimations.

51
New cards

Why must sample tubes remain securely capped during centrifugation?

Capping prevents liquid spills, sample evaporation, and the generation of dangerous biological aerosols.

52
New cards

Name four types of temperature-controlled chambers used in clinical laboratories.

  1. Incubators; 2. Refrigerators; 3. Freezers; 4. Water baths
53
New cards

Why should an adjustable micro-pipette never be adjusted beyond its stated volume range?

Dialing past the minimum or maximum limits damages the internal piston calibration and mechanical threads.

54
New cards

Are volume markings on standard test tubes precise enough for critical volumetric measurements?

No, test tube markings provide only rough volume estimates.

55
New cards

What safety device must always be attached to manual glass pipettes to draw liquid?

A mechanical pipetting aid (such as a rubber pipette bulb or safety pipette pump).

56
New cards

At which specific point on a concave liquid meniscus should a volume reading be taken?

At the lowest point (bottom) of the concave curve touching the calibration line.