1/52
Units 1-6
Definition of a Limit
lim (x→c) f(x) = L means f(x) gets arbitrarily close to L as x approaches c from both sides, regardless of f(c).
Continuity at x = c (3 Conditions)
f(c) is defined, 2. lim (x→c) f(x) exists (left = right limit), and 3. lim (x→c) f(x) = f(c).
Types of Discontinuities
Removable (hole where limit exists), Jump (left limit ≠ right limit), and Infinite (vertical asymptote).
Intermediate Value Theorem (IVT)
If f is continuous on [a, b] and k is between f(a) and f(b), then there is at least one c in (a, b) where f(c) = k.
Horizontal Asymptotes (Limits at Infinity)
Compare degrees of numerator and denominator as x → ±∞
Special Trig Limits
lim (x→0) (sin x)/x = 1 and lim (x→0) (1 - cos x)/x = 0.
Limit Definition of the Derivative
f'(x) = lim (h→0) [f(x + h) - f(x)] / h, or at a point c: f'(c) = lim (x→c) [f(x) - f(c)] / (x - c).
Differentiability vs. Continuity
Differentiability implies continuity, NOT vice versa. Functions fail to be differentiable at discontinuities, corners/cusps, and vertical tangents.
Power Rule
d/dx [x^n] = n·x^(n - 1).
Product Rule
d/dx [f(x)·g(x)] = f'(x)·g(x) + f(x)·g'(x).
Quotient Rule
d/dx [f(x)/g(x)] = [g(x)·f'(x) - f(x)·g'(x)] / [g(x)]² ("low d-high minus high d-low, square the bottom and away we go").
Chain Rule
d/dx [f(g(x))] = f'(g(x)) · g'(x) (derivative of the outside evaluated at the inside, times derivative of the inside).
Trig Derivatives
d/dx(sin x) = cos x
Exponential & Logarithmic Derivatives
d/dx(e^x) = e^x
Implicit Differentiation
Differentiate both sides with respect to x, multiplying by dy/dx whenever differentiating a y-term, then solve for dy/dx.
Inverse Function Derivative Formula
If g = f⁻¹, then g'(x) = 1 / f'(g(x)). Note: if (a, b) is on f, then (b, a) is on f⁻¹ and slopes are reciprocals.
Inverse Trig Derivatives
d/dx(arcsin x) = 1/√(1 - x²)
Second Derivative Notation
f''(x) = d²y/dx² = d/dx(dy/dx). For implicit functions, substitute dy/dx back in when finding d²y/dx².
L'Hôpital's Rule
If lim f(x)/g(x) gives 0/0 or ±∞/∞, then lim f(x)/g(x) = lim f'(x)/g'(x). (On FRQs, write "lim f(x) = 0 and lim g(x) = 0", NEVER "= 0/0").
Average Rate of Change (AROC) vs. Instantaneous Rate of Change (IROC)
AROC = [f(b) - f(a)] / (b - a) (secant slope)
Particle Motion: Position, Velocity, Acceleration
Position = s(t)
Speeding Up vs. Slowing Down
A particle speeds up when v(t) and a(t) have the SAME sign
Related Rates Strategy
Linearization (Tangent Line Approximation)
L(x) = f(a) + f'(a)(x - a). Overestimates if f is concave down (f'' < 0)
Mean Value Theorem (MVT)
If f is continuous on [a, b] and differentiable on (a, b), there exists c in (a, b) such that f'(c) = [f(b) - f(a)] / (b - a).
Rolle's Theorem
Special case of MVT: if f is continuous on [a, b], differentiable on (a, b), and f(a) = f(b), then there is at least one c in (a, b) where f'(c) = 0.
Extreme Value Theorem (EVT)
If f is continuous on a closed interval [a, b], then f is guaranteed to have both an absolute maximum and an absolute minimum on [a, b].
Critical Numbers
Interior domain values x = c where f'(c) = 0 or f'(c) is undefined.
Candidates Test (Finding Absolute Extrema)
To find absolute max/min on [a, b], evaluate f(x) at all critical numbers in (a, b) AND at endpoints a and b, then compare y-values.
First Derivative Test (FRQ Justification)
f has a local max at x = c because f'(x) changes from positive to negative at x = c (local min if f' changes from negative to positive).
Increasing vs. Decreasing Justification
f is increasing on an interval because f'(x) > 0 on that interval (decreasing because f'(x) < 0).
Concavity Justification
f is concave up on an interval because f''(x) > 0 (or f' is increasing)
Point of Inflection Justification
f has a point of inflection at x = c because f''(x) changes sign at x = c (or f' changes from increasing to decreasing or vice versa).
Second Derivative Test
If f'(c) = 0 and f''(c) > 0, f has a local min at c (concave up). If f'(c) = 0 and f''(c) < 0, f has a local max at c (concave down).
Optimization Strategy
Riemann Sums (Left, Right, Midpoint)
Approximate definite integrals using rectangles of width Δx = (b - a)/n
Trapezoidal Sum
Approximates area using trapezoids: (Δx / 2) · [f(x_0) + 2f(x_1) + 2f(x_2) + … + f(x_n)]. Overestimates concave up functions
Definite Integral as Net Signed Area
∫_a^b f(x) dx = (Area above x-axis) - (Area below x-axis) on [a, b].
Properties of Definite Integrals
∫_a^a f(x) dx = 0
Fundamental Theorem of Calculus (Part 1 - Derivative of an Integral)
d/dx [∫_a^(g(x)) f(t) dt] = f(g(x)) · g'(x).
Fundamental Theorem of Calculus (Part 2 - Evaluation)
∫_a^b f(x) dx = F(b) - F(a), where F'(x) = f(x).
Accumulation Function Formula
f(b) = f(a) + ∫_a^b f'(x) dx (Final Amount = Initial Amount + Net Change).
Total Distance vs. Displacement
Displacement = ∫_a^b v(t) dt
Average Value of a Function
f_avg = [1 / (b - a)] · ∫_a^b f(x) dx.
Power Rule for Integration
∫ x^n dx = [x^(n + 1) / (n + 1)] + C (for n ≠ -1).
Basic Trig Integrals
∫ cos x dx = sin x + C
Exponential & Logarithmic Integrals
∫ e^x dx = e^x + C
Inverse Trig Integrals
∫ 1/√(1 - x²) dx = arcsin x + C
U-Substitution Strategy
Let u = inside function, find du = u'(x) dx, rewrite integral completely in terms of u (including changing limits of integration for definite integrals!), integrate, and substitute back if indefinite.
Integrating Even vs. Odd Functions on [-a, a]
If f is even (f(-x) = f(x)), ∫(-a)^a f(x) dx = 2·∫_0^a f(x) dx. If f is odd (f(-x) = -f(x)), ∫(-a)^a f(x) dx = 0.
Integration by Long Division
Use when integrating a rational function where the degree of the numerator is GREATER THAN OR EQUAL TO the degree of the denominator.
Integration by Completing the Square
Use when integrating 1/(ax² + bx + c) or 1/√(ax² + bx + c) that doesn't factor nicely, turning it into an arctan or arcsin form.