1/44
This set covers the fundamental vocabulary, construction, and operating principles of Field Effect Transistors (FETs) and Junction Field Effect Transistors (JFETs) as compared to Bipolar Junction Transistors (BJTs).
Bipolar Transistor
An ordinary transistor in which both holes and electrons play a part in the conduction process, typically characterized by low input impedance and a considerable noise level.
Field Effect Transistor (FET)
A semiconductor device where the output characteristics are controlled by input voltage (electric field) rather than input current, featuring high input impedance often exceeding 100megaohms.
Junction Field Effect Transistor (JFET)
A three-terminal semiconductor device in which current conduction is carried by one type of carrier (electrons or holes) and controlled by an electric field between the gate and the conducting channel.
Source (S)
The terminal of a JFET through which charge carriers enter the conducting bar.
Drain (D)
The terminal of a JFET through which charge carriers leave the conducting bar.
Gate (G)
The terminal connected to the two internally joined pn junctions; it controls the width and resistance of the conducting channel.
n-channel JFET
A JFET in which the silicon bar forming the conducting channel consists of n-type material, where electrons are the charge carriers.
p-channel JFET
A JFET in which the silicon bar forming the conducting channel consists of p-type material, where holes are the charge carriers.
Unipolar Transistor
Another name for a JFET because current conduction is by only one type of carrier, either holes in a p-type channel or electrons in an n-type channel.
Transconductance (gm or gfs)
The ratio of the change in output (drain) current to the change in input (gate) voltage, which characterizes the gain of a JFET.
Output Characteristics
The curve showing the relationship between drain current (ID) and drain-source voltage (VDS) at a constant gate-source voltage (VGS).
Pinch off Voltage (VP)
The minimum drain-source voltage above which the drain current essentially becomes constant because the depletion layers almost touch each other.
Shorted-gate Drain Current (IDSS)
The maximum drain current that occurs when the gate-source voltage is zero (VGS=0) and the drain-source voltage is equal to the pinch off voltage.
Gate-source Cut off Voltage (VGS(off))
The specific reverse gate-source voltage at which the two depletion layers touch each other, causing the channel to become a non-conductor and cutting off the current.
Active Region
The region between the pinch off voltage (VP) and the breakdown voltage (VDS(max)) where the JFET behaves as a constant-current device.
Thermal Runaway
A condition of uncontrolled current increase due to rising temperature, which a JFET is notably not subjected to.
MOSFET
Metric Oxide Semiconductor Field Effect Transistor; an improved form of JFET.