1/58
Looks like no tags are added yet.

Equal, at angle

Equal, at 90°

Unequal, at angle

Unequal, at 90°

Equal, or unequal?
Equal

Equal or Unequal?
Unequal

At Angle or 90°
At angle

At Angle or 90°
90°

What colour is the Tangent
Purple

What colour is the Radius
Red

What colour is the Diameter
Cyan

What colour is the Chord
Blue

What colour is the Arc
Yellow

What colour is the Sector?
Pink

What colour is the segment?
Green
The area between an Arc and two Radiuses
Sector
The area between an arc and a chord
Segment

The following is an example of
Perspective

The following is an example of
Isometric

The following is an example of
Oblique

What method of layout is used to layout a Round Elbow
Parallel Line Development

What method of layout is used to layout an Off Centre Taper
Cross Triangulation

What method of layout is used to layout a Right Cone
Radial Line Development
What method of layout is used to layout an On Centre Taper
Radial Line Development

What method of layout is used to layout a T-Branch
Parellel Line Development

What method of layout is used to layout a Square to Round
Triangulation

What method of layout is used to layout a Weather Cap
Radial Line Development

Identify the Apex
B

Identify the Slant Length
A

Identify the Pattern Radius
A

Identify the Apex Height
E

Identify the Frustum Line
C

Identify the Line of Truncation
D
What formula do you use to find the slant length of a right cone with a Diameter of 14” and an Apex Height of 6”
A² + B² = C²
What formula do you use to find the pattern radius of a right cone with a Diameter of 14” and an Apex Height of 6”
A² + B² = C²
What formula would you use to find the arc length of the pattern a right cone?
π x diameter
What formula would you use for the arc length of the cut out?
(2 x π x slant length) - (π x diameter)

In the image of an elboow gore, what is A
Mitre Line

In the image of an elbow gore, what is B
Mitre Angle

In the image of an elboow gore, what is C
Throat Radius

In the image of an elboow gore, what is D
Centre Line Radius

In the image of an elboow gore, what is E
Heel Radius

In the image of an elboow gore, what is F
Rise
What formula is used to determine a question such as: What would the resulting angle be if you only used the 1st, 2nd, and last gore of a 4 piece 90° elbow?
(Degree of elbow(90°) ÷ [(# of pieces x 2) - 2] = degree of individual pieces (15°) = 1st (15°) + 2nd (30°) + last (15°) = 60°
If the first gore of a 4 piece 90° elbow was 15°, what degree would the third gore be?
30°
When triangulating from a plan view, what two lengths are put on the true length of a triangle?
Plan Length 90 degrees to the Elevation Height
When laying out an S&D duct elbow with a finished throat radius of 8”, what should its throat radius be in the layout of the pattern?
7-1/2
From which views are the true lengths taken from to develop a T-Pattern?
Front Elevation
How many true lengths are in the front elevation of a right cone?
2
What is the name of the line dividing the gores of an elbow?
Mitre Line
How many sides are visible in an oblique, isometric, and perspective drawing?
3
What special points or lines used in layout that don’t fall on regular element lines known as?
Auxilliary Lines
What is the name of a rectangular duct fitting that is used to change the elevation of a duct but not the direction of airflow or duct size
Ogee Offset
What is the name of the rectangular duct fitting that changes size from end to end but not the direction of airflow?
Transition
The radius for a pattern from a right cone is obtained from
Slant Length
What formula do you use to determine the actual length of a line drawn using a scale ruler?
Length of line drawn ÷ scale
How many element lines are required to lay out a square to round off center both ways?
16
Pictorial drawings are typically drawn at which angle?
30 Degrees
What is the name of special points or lines that do not fall on regular element lines?
Auxilliary lines/points