1/36
Looks like no tags are added yet.
ROR - Collusion theory and activation energy
for a reaction to occur, particles must collide in the correct orientation and with sufficient energy, known as the activation energy
Factors affecting ROR - temp
increased temp- particles move faster and collide with more energy
Factors affecting ROR - surface area
Increased surface area - Breaking solids into smaller pieces exposes more particles for collision
Factors affecting ROR - increased concentration
more particles in a space lead to more frequent collisions
Factors affecting ROR - adding a catalyst
this provides an alternative pathway with lower activation energy, speeding up the reaction without being consumed
Experiments - repeating an experiment
ideally experiments would be repeated 5 times → allows you to calculate an average
The more repeats completed - the closer the average will be to the true value
→ trials impacted by ransom error (outliers) can be justifiable eliminated
Experiment error types - systemic vs random
SYSTEMIC
can be controlled by adjusting the method
Impacts all repeats the same way
RANDOM
not able to be controlled by the individual
Impact one repeats only
Random errors
random errors are caused by:
the readability of the measuring instrument
The effects of changes in surroundings → eg: temp variations and air currents
The observer misinterpreting the reading
→ random errors make a measurement less precise but not in any particular direction
Expressed in uncertainty range → eg: 25.05 +- 0.05C
Evaluation
evaluations are used to identify all sources of error that took place during an investigation
Blunder is not an error - human error is irrelevant

Accuracy and precision
accuracy refers to proximity of your results to the true value
Precision refers to the repeatability of your results
Experiments - Repeatable
experiments are repeatable if the same person duplicates the experiment with the same results
→ results can only be carried forward if they are concordant with each other
→ High variation in raw data suggests random errors
→ data that is skewed in the same direction form the true value suggests a systemic error
Experiments - reproducible
experiments are reproducible if several experimentalists duplicate the results
→ if the same method cannot be repeated by different individuals, this suggest one of the following
the techniques is not adequate (random error)
The method is not a good one (systemic error o)
Uncertainty
no measurement is free from error
→ error is introduced by the limitations of instruments and measuring devices (eg: size of divisions on a cylinder) and imperfection of human sense
→ Although errors in calculations can be large → they don’t contribute to uncertainty in measurements
Significant figures
no. Of significant figures in any answer should reflect the no. Of sf in given data
→ when data is X or / → answer should be quoted to same no. Of significant figures as lease precise value
→ when data is + or - → answer should be quoted to same no. Of decimal places as least precise value
→ when + or - measurements, the total absolute uncertainty = sum of absolute uncertainties

Scientific notation
Just the digits, with the decimal point placed after the first digit, followed by × 10 to a power that puts the decimal point where it should be - it shows how many places to move the decimal point

Fossil fuels and biofuels - what is a fuel
a substance with stored energy (usually chemical or nuclear energy) that can be easily transformed to another form (usually heat energy)
Units for energy - Joules
Fuels can be compared in relation to their:
energy content (kJg-1)
Renewability (fossil fuels V biofuels)
Enviro impact (sourcing and combustion)
Global warming
carbon dioxide is a greenhouse gas
It lets sunlight enter the atmosphere but traps heat that would otherwise escape back into space
As CO2 levels rise bcs of burning fuels > more heat = trapped → earths temp rises
→ lead to effects such a melting ice caps, rising sea levels and more extreme weather
Fossil fuels
decayed plant material formed over millions of years under pressure, high temps and lack of air
During these changes- some of the chemical energy is retained from when the plants originally accummalated by carrying out photosynthesis
Non-renewable energy resources are this that are being used at a faster rate than they can be replaced
Eg: coal, crude oil, natural gas
Fossil fuels - coal
composition - mostly carbon (also water, hydrogen, nitrogen and Sulfur)
sourcing : mining - eg: open cut mine was in Latrobe Valley, vic
Fossil fuels- crude oil
composition - molecules made of hydrogen and carbon -Eg: CH4
Sourcing - extraction - collects under impermeable rock and is pumped out
Fossil fuels - natural gas
composition - hydrocarbons that are gases under the conditions they are extracted from the earth, consisting mainly of methane
Sourcing -
→ coal seam gas - natural gas that adsorbs to coal deposits → extracted via fracking : injecting sand/water/chemicals at high pressure into coal/ rock to release trapped natural has
→ liquefied petroleum gas, LPG
a mixture of propane and butane store under pressure to liquefy
Obtained via fractional distillation of natural gas or crude oil
Biofuels
Renewable resource derived from plant and animal materials
Also protected that they have less impact on environment than fossil fuels
→ combustion of biofuels → also releases of CO2 into atmosphere
→ raw plant materials produced by photosynthesis → removes CO2 from atmosphere → results in lower net release of CO2
eg: bioethanol, biogas, biodiesel
Bioethanol
the fermentation of starches and sugar produces bioenthanol → anaerobic process (no oxygen)
requires enzymes (biological catalysts)
→ ethanol mixed w petrol to create E10
even to CO2 is poduced when creating/combusting bioethanol → lower net CO2 than fossil fuels
C6H12O6 (aq) ———> 2CH3CH2OH (aq) + 2CO2 (g)
biofuels - biogas
composition : mostly methane as well as some other gases including carbon dioxide
sourcing: biogas is formed by the anaerobic breakdown of organic waste
can be collected at rubbish tips, farms and food processing plants
→ its used for heating and electricity and its waste is a source of fertilizer
Environmental impacts of gases
emissions from the combustion of the fuel
Sourcing the fuel
Petro diesel vs biodiesel - enviro impacts
Sourcing?
biodiesel requires land to be cleared for farming plant crops
Oil rigs are used to source crude oil in the ocean risk spills
Renewability?
biodiesel is a renewable fuel:
Petro-diesel is made from a finite resource, crude oil that takes millions of years to form
Emissions?
both emit a significant amount of CO2 during combustion but less than petrol due to greater fuel efficiency
However the plants that produce biodiesel absorbs CO2 during photosynthesis → this reduced the net CO2 output
Both emit other pollutants such as nitrogen oxides → Sulfur dioxide and carbon monoxide however biodiesel emits less of these
Combustion of fossil fuels
heat energy is released from combustion
→ complete combustion - excess oxygen gas
→ incomplete combustion → limited oxygen gas
Complete combustion reactions
reactions of a fuel with oxygen by burning, coal, oil, natural gas, oil shales and tar sands
→ all these fuels are considered hydrocarbons bcs they only consist of hydrogen and carbon
→ combustion = exothermic reaction bcs reactants release energy in form of light/heat
produces CO2/water
Sufficient O2 to break down the fuel
Releases large quantities of energy
Hydrocarbons: alkanes
this is the alkane series and all end in the letters ‘ane’
All have the same genral formula → CnH2n+2
Length of carbon chain increases by one which will change the beginning of the name
combustion
known as burning, these involve a fuel (typically hydrocarbons) reacting with oxygen to produce carbon dioxide and water vapor, often releasing heat and light.
fuel + oxygen → water + carbon dioxide
Incomplete combustion
reaction of a hydrocarbon fuel with oxygen
An exothermic reaction bcs reactants release energy in the form of light and heat
Incomplete combustion
→ produces carbon monoxide → carbon soot and water
→ insufficient oxygen to completely break down the fuel
→ releases smaller qualities of energy
Yellow flame during incomplete combustion
this is due to the production of carbon soot
When carbon soot is heated → emits yellow → turns flame yellow
When carbon monoxide is produced and heated → emit an orange colour → complete combustion is often a barely visible blue flame
Ionic compounds
aka salts form when electrons are transferred btwn atoms which are then held together by electrostatic forces of attraction
Ionic compound bound in a ratio between cations and anions → net charge is 0
Precipitation reactions
occur when two soluble ionic compounds react to form an insoluble solid → precipitate
Acids
a type of compound that dissolves in water
Ph is lower than 7
Bases
the type of compound that dissolves in water
Bases have a ph that is above 7
Neutralisation reaction
acid + base → salt + water