1/94
Looks like no tags are added yet.
Ventilation
The movement of gas in and out of the lung; two phases: inspiration and expiration
What is required for gas to move in or out of the lungs?
A pressure gradient; gas 'wants to go' to an area of lower pressure
Pao
Pressure at the airway opening (mouth pressure)
Palv
Pressure in the alveoli (intrapulmonary pressure)
Ppl
Pressure in the pleural space (intrapleural pressure)
Pbs
Pressure at the body surface
Transrespiratory pressure gradient (Prs)
Prs = Palv - Pao; responsible for gas flow into and out of the lungs
Transpulmonary pressure gradient (PL)
PL = Palv - Ppl; responsible for the degree of alveolar inflation
Transthoracic pressure gradient (Pw)
Pw = Ppl - Pbs; pressure across the chest wall; total pressure needed to expand or contract the lungs and chest wall together
Equation of motion for the respiratory system
Pressure = (Volume / Compliance) + (Resistance x Flow)
Equation of motion: Pressure
Force generated by the respiratory muscles during inspiration
Equation of motion: Volume
Volume change (e.g., VT)
Equation of motion: Compliance
Distensibility of the lungs and thorax
Equation of motion: Resistance
Airflow and tissue resistance
Equation of motion: Flow
Volume change per unit of time
Compliance and resistance together
The load against which the respiratory muscles must work to ventilate the lungs (involves lungs and thorax)
Work of breathing in healthy lungs
Minimal; mainly during inspiration; expiration is passive, using energy stored during inspiration
Two categories of forces opposing lung inflation
Elastic forces and frictional forces
Elastic forces opposing inflation
Tissues of the lungs and thorax, and surface tension in the alveoli
Frictional forces opposing inflation
Resistance to gas flow and resistance to tissue movement during breathing
Elasticity
The physical tendency of an object to return to its initial state after being stretched
Elastic recoil
The return to the initial state; a new rubber band has great recoil, an old one has less
Tension
A force tending to stretch or elongate something
Hooke's Law
An object stretches equal units of length for each unit of force applied (tension is proportional to deformation)
Elastic limit
The point of maximal stretch; beyond it more tension produces little or no increase in length and may cause permanent distortion or breakage
Do the lung and chest wall obey Hooke's Law?
Yes; they stretch when force (inspiration) is applied, but only to a point; beyond it, more pressure will not increase volume and may cause damage
Natural tendency of lung tissue
To collapse/contract (like a rubber band)
Natural tendency of chest wall tissue
To expand
Pressure needed to inflate the lung
To stretch the lung (increase volume) pressure must be applied; more pressure yields more volume, but there are limits
Pleural space pressure (notes)
About -3 to -5 cmH2O (subatmospheric)
Hysteresis
The difference in the pressure-volume relationship between inflation and deflation
Surface tension and hysteresis
During inflation extra pressure is needed to overcome surface tension; during deflation surface tension forces are reduced
Pulmonary surfactant
Lowers surface tension in the lung; most effective at LOW lung volumes
Effect of altered or destroyed surfactant
Significantly increases the work of distending the lung (higher surface tension to overcome)
Compliance
The distensibility (ability to stretch and expand) of the lung; volume change per unit of pressure change
Elastance
The property of resisting deformation; the reciprocal of compliance
Lung compliance units
Liters (or mL) per cmH2O
Compliance formula
C = change in volume / change in pressure (CL = ΔV / ΔP)
Inflation pressure for lung compliance
The difference between alveolar and pleural pressures (PL)
How is compliance usually measured?
Under static conditions (no airflow)
Alveolar pressure under static conditions
Zero (equal to room pressure); otherwise gas would be flowing
Transpulmonary pressure under static conditions
PL = Ppl (the transpulmonary gradient equals intrapleural pressure), which determines how inflated the alveoli become
Normal lung compliance (healthy adult)
About 0.2 L/cmH2O (200 mL/cmH2O)
Pressure-volume curve in emphysema
Steeper and displaced to the left: increased compliance; large volume changes for small pressure changes; hyperinflation
Pressure-volume curve in pulmonary fibrosis
Flatter and displaced to the right: decreased compliance; great pressure needed for small volumes; reduced lung volume
Hyperinflation
Abnormally increased lung volume
Normal chest wall compliance
Similar to the lungs: 0.2 L/cmH2O
Conditions that reduce chest wall compliance
Obesity, kyphoscoliosis, ankylosing spondylitis, and many others
Why is intrapleural pressure subatmospheric?
Lungs pull inward and the chest wall pulls outward
Functional residual capacity (FRC)
The resting volume of the lungs where lung and chest wall forces are balanced; at the end of a normal relaxed exhalation; alveolar pressure equals atmospheric pressure
If the lung-chest wall balance is disrupted
The lung collapses to a volume less than FRC, or the thorax expands to a volume larger than FRC
How is the balance interrupted during inspiration?
Respiratory muscles overcome the lungs' contractile force; the chest wall's tendency to expand helps at the start; beyond its resting level, inspiratory muscles do more work against lung and chest wall recoil
Why is exhalation passive?
Potential energy stored in the stretched lung and chest wall during inspiration causes passive deflation
When is muscle effort required for exhalation?
To exhale below FRC (overcoming the chest wall's tendency to expand), using expiratory muscles
Total compliance
Sum of lung compliance and chest wall compliance; about 0.1 L/cmH2O
Factors that alter total compliance
Patient position (e.g., supine), and disorders affecting the lungs, chest wall, or both
Nonelastic (frictional) opposition to ventilation
Occurs only when the system is in motion; two components: tissue viscous resistance and airway resistance
Tissue viscous resistance
Impedance of motion from tissues (lungs, rib cage, diaphragm, abdominal organs); about 20% of total resistance to lung inflation
Conditions that increase tissue viscous resistance
Obesity, fibrosis, and ascites
Airway resistance
Frictional resistance caused by gas flow through the airways; about 80% of the total resistance to ventilation
Airway resistance formula
Raw = ΔP / flow = (Palv - Pao) / flow
Airway resistance units
cmH2O/L/sec (pressure in cmH2O; flow in L/sec)
Normal airway resistance (healthy adult)
About 0.5 to 2.5 cmH2O/L/sec
Meaning of normal airway resistance
To move gas at 1 L/sec (60 L/min), a healthy person lowers alveolar pressure to 0.5-2.5 cmH2O below atmospheric
Laminar flow
Flow in discrete layers (streamlines); layers in the center move faster than those near the wall; Poiseuille's Law applies
Poiseuille's Law: factors in pressure needed for a given flow
Driving pressure, gas viscosity, tube length, flow rate, and tube radius
Simplified Poiseuille relationship
ΔP is proportional to flow / r^4 (or flow is proportional to ΔP x r^4): flow and pressure are greatly influenced by airway radius
Effect of halving airway radius at constant flow
Pressure must increase 16 times; work of breathing can markedly increase
Effect of halving airway radius at constant pressure
Flow decreases 16 times
Distribution of airway resistance: large airways
About 80% is in the nose, mouth, and large airways (trachea and bronchi), where flow is mostly turbulent (high velocity, many corners)
Distribution of airway resistance: small airways
About 20% is in airways smaller than 2 mm in diameter, where flow is mainly laminar
Driving pressure across small airways
Less than 1% of the total driving pressure of the system
Airway diameter during inspiration
Increases (lung stretch, widening transpulmonary gradient); resistance falls
Airway diameter during exhalation / low lung volume
Decreases; the lower the lung volume, the higher the resistance
Local factors (alveolar level)
Individual alveoli and their airways differ in compliance and resistance, which causes uneven ventilation even in healthy lungs
Elastic and resistive elements of each alveolar unit
Elastic element = the alveolus; resistive element = the airway
High compliance lung units
Stretch a lot, less elastic recoil; fill slowly, empty slowly; accept a lot of volume
Low compliance lung units
Don't stretch much, recoil quickly; fill quickly, empty quickly; take less volume
High resistance alveoli
Less driving pressure reaches the alveolus, so less volume change; take a long time to fill and a long time to empty
Pressure drop across a partial obstruction
May be significant, leaving less pressure for alveolar inflation
Time constant (TC)
Expresses the relationship between compliance and resistance of a lung unit; TC = resistance x compliance
Time constant units
(L/cmH2O) x (cmH2O/L/sec) = seconds
Long time constant
Resistance OR compliance is high; takes longer to fill and empty than normal units
Short time constant
Resistance or compliance is low; fills and empties more quickly than normal units
Time constants and ventilation distribution
Units with long OR short time constants get less of the ventilation than units with normal resistance and compliance (when inspiratory time is fixed)
Lung diseases with abnormal ventilation from small airway obstruction
Emphysema, asthma, and chronic bronchitis (many units have increased time constants)
Causes of long time constants in obstructive disease
Increased resistance in the small airways AND loss of normal elastic recoil (e.g., emphysema)
Egan alveolus A
Normal resistance and compliance: fills and empties at a normal rate (normal time constant)
Egan alveolus B
Normal resistance but low compliance: fills and empties faster (low time constant) but at lower volume
Egan alveolus C
Normal compliance but high resistance: fills and empties slower (high time constant) and at lower volume
Frequency dependence of compliance
Lung compliance decreases with rapid breathing; occurs when some alveoli have normal time constants and others have long ones
Why does frequency dependence occur?
As RR increases, less time for filling and emptying; long time constant alveoli fill less and empty slower, so more of each breath goes to normal alveoli
Dynamic compliance
Compliance measured during breathing; still volume change divided by pressure change, but the pressure change includes pressure used to overcome airflow resistance
Why does dynamic compliance decrease with higher RR?
Limited time to fill and empty; alveoli with abnormal time constants don't empty and air is trapped
Dynamic hyperinflation
Air trapping from abnormal time constants; can occur with almost any stimulus to increase ventilation (higher RR and/or flows exaggerate time constant differences)