1/82
Looks like no tags are added yet.
What are the two general chemical classes of polymers, which is most commonly used in packaging, and what distinguishes their molecular structures?
Thermoplastics and thermosets. Thermoplastics are most commonly used in packaging. Thermoplastic chains are not cross-linked and can move past one another when heated; thermosets have cross-linked, interconnected chains that cannot move freely without destroying the material.
Complete the following: As molecular weight increases, melting point ____. As branching increases, density ____. A plastic with two monomers is a ____. Highly ordered chains are ____. Random chain arrangement is ____. The stiffer HDPE has a ____ molecular weight.
Increases; decreases; copolymer; crystalline; amorphous; higher.
What is the molecular structural difference between HDPE, LDPE, and LLDPE?
HDPE has linear chains; LDPE has highly branched chains; LLDPE has linear chains with short branches.
What is the process of stretching plastic film in one or two directions called, and what does it do?
Orientation. It straightens and aligns polymer molecules in the direction of stretching, improving film properties.
Identify I-LLDPE, PVC, PET, PVAC, EVOH, PVDC, PS, PA, and OPP.
I-LLDPE: Linear low-density polyethylene; PVC: Polyvinyl chloride; PET: Polyethylene terephthalate; PVAC: Polyvinyl acetate; EVOH: Ethylene vinyl alcohol; PVDC: Polyvinylidene chloride; PS: Polystyrene; PA: Polyamide; OPP: Oriented polypropylene.
How can you distinguish an amorphous polymer from a crystalline version of the same polymer?
The polymer with lower crystallinity generally has better clarity than the polymer with higher crystallinity.
How do the general properties of thermoplastics and thermosets differ?
Thermosets generally have higher potential use temperatures and greater solvent resistance.
What properties of plastic are affected by the molecule's degree of polarity?
Melting point, solubility, barrier properties, and coefficient of friction.
How are heat-shrink properties imparted to a polymer?
A combination of thermal and mechanical history is used to produce shrink film.
What is cold flow, and where are cold-flow considerations most important?
Cold flow, or creep, is deformation under load over time. Low cold flow is important when a plastic part must hold a significant load.
Why are all plastics clear in the melt state?
Rapid molecular movement prevents molecules from becoming ordered.
Which two common packaging plastics are predominantly nonpolar?
Polyethylene and polypropylene.
From what raw material source are most packaging plastics made?
Petrochemicals.
What is the purpose of flame or corona treatment?
To impart polarity to the surface of low-polarity plastics and improve adhesion.
Which has the higher melting point: high-molecular-weight polysulfone or low-molecular-weight polysulfone?
High-molecular-weight polysulfone.
What is the purpose and advantage of producing copolymers?
Copolymers combine favorable properties of distinctly different polymers.
What is the difference between addition polymers and condensation polymers?
Addition polymerization joins monomers together like links in a chain. Condensation polymerization joins reactive monomers while releasing a small molecule, commonly water.
What influences whether a particular PET is amorphous or crystalline?
Filling or application temperature and processing conditions determine whether PET becomes amorphous or crystalline.
Why can't the same mold be used to shape all plastic materials?
Plastics have different coefficients of expansion and molding temperatures, so the same mold can produce parts with different dimensions.
Name four plastics that would sink in water.
Polyamide, polyacrylonitrile, polycarbonate, and polyvinyl chloride.
Name two applications for uniaxial shrink film and explain why it is used for them.
Tamper-evident neck bands and shrinkable label stock. They are monoaxially oriented so shrinkage occurs in only one direction.
What are Tg and Tm, and how do transition patterns differ between amorphous and crystalline polymers?
Tg is the glass transition temperature, where a rigid polymer becomes soft and rubbery. Tm is the melting temperature. Amorphous polymers exhibit a prominent Tg, while crystalline polymers exhibit a prominent Tm.
Name four basic ways of forming plastics into semirigid shapes.
Extrusion blow molding, injection molding, profile extrusion, and thermoforming.
What problem can occur if you switch the polymer used in a mold designed for a particular plastic?
Different plastics have different shrinkage rates, so the molded part may have incorrect dimensions. Molds incorporate shrinkage tolerances.
What is coextrusion, and what advantages does it offer?
Coextrusion uses multiple extruders to feed different materials into a single multilayer sheet or film. It combines the performance advantages of different materials.
What machine heats and softens plastic before molding?
A plasticating extruder, consisting of a barrel and rotating screw.
What is the principal use for a thin-walled extruded tube?
Personal care products.
Define sprue, runner, flash, gate, and parison.
Sprue: Main channel through which molten plastic enters the mold. Runner: Channel distributing molten plastic to mold cavities. Flash: Plastic that flows along the mold parting line when clamping force is insufficient. Gate: Small opening through which molten plastic enters the cavity. Parison: Hollow plastic tube used in bottle making.
What are the two ways of manufacturing plastic film?
Cast film and blown film.
How are plastic bags usually made?
Blown film is cut to size and sealed at one end.
What combinations of vacuum, pressure, and mechanical assists are used in thermoforming?
Plug-assist vacuum forming uses a plug to push heated sheet into a cavity before vacuum pulls it against the mold. Billow forming uses air to push the sheet upward, a plug to stretch it into the cavity, and vacuum to conform it to the mold.
What is the importance of a programmed parison?
It controls wall thickness along a container, especially in narrow-waisted bottles, using a programmed moving mandrel.
What is the makeup of a high-oxygen-barrier multilayer bottle typically used for ketchup?
PP, EVOH, and PP layers, with bonding layers on both sides of EVOH.
What molding process would be used to make a 1,200-liter bulk bin?
Rotational molding.
What is the significance of the number found on most blow-molded bottles and injection-molded parts?
It identifies the mold cavity that produced the part and helps troubleshoot defects or investigate complaints.
Why are carbonated beverage bottles injection-stretch blow molded?
Stretching improves strength and orientation, allowing bottles to withstand internal carbonation pressure.
What designs can extrusion blow molding produce that are more difficult to make by injection blow molding?
Oil, detergent, and household chemical bottles, including bottles with handles, pumps, or hardware.
Why isn't injection molding used to make narrow-mouthed bottles?
Injection molds are expensive and threaded containers require provisions for removal. Injection blow molding is better suited to narrow-mouthed bottles.
How does an injection-molding extruder differ from an extrusion-profile extruder?
An injection-molding extruder meters and ejects a measured quantity of melt into a mold, while a profile extruder produces a continuous flow.
Why do injection-molded parts have tighter tolerance ranges than extrusion-blow-molded or thermoformed parts?
Injection molding is controlled by metal mold surfaces, producing greater dimensional accuracy; blow molding and thermoforming are less precise.
How is a cast film biaxially oriented?
It is stretched in the machine direction and then grasped along its sides and stretched wider in the transverse direction.
What is an undercut?
A part feature that prevents a mold from opening normally unless additional mold components are removed; it increases mold cost.
What are the advantages of injection blow molding, and where are they particularly beneficial?
It produces no generated regrind, requires no secondary operations, gives precise neck finishes and good material distribution, and allows many cavities for small bottles. It is beneficial for bottle manufacturing and small containers.
What are the implications of choosing injection molding versus thermoforming for open tubs? What feature is easier to incorporate into thermoformed tubs, and how can the processes be distinguished?
Injection molding has higher tooling costs but precise parts and a visible gate and parting lines. Thermoforming has lower tooling costs and can easily incorporate snap-on lids. Thermoformed tubs may show vacuum holes and lack obvious parting lines.
How can you recognize the process by which a bottle was made?
Extrusion-blow-molded bottles have a bottom pinch-off line and faint side parting lines. Injection-blow-molded bottles lack pinch-off marks but have a gate point or bull's-eye and faint side parting lines.
Why are cavity molds preferred over plug molds in thermoforming?
Cavity molds provide better material distribution and greater draw, especially when used with plug assist.
What is a sink mark, and what might cause it?
A surface depression where wall thickness changes substantially, caused by uneven shrinkage during injection molding.
What does melt flow rate measure, and what is its significance?
It measures the mass of plastic extruded through a small orifice in 10 minutes under specified conditions. It indicates melt fluidity and helps determine suitable processing temperatures and forming methods.
Which commodity packaging plastic does not burn and self-extinguishes?
PVC.
Which commodity packaging plastic is used mostly for thermoforming?
PS.
Which commodity packaging plastic is an exceptionally high all-around gas barrier?
PVDC.
Which commodity packaging plastic is strongest and stiffest?
PC.
Which commodity packaging plastic has the lowest melting point?
LDPE.
Which commodity packaging plastic has the highest melting point?
PET.
Which commodity packaging plastic is used most often for closures?
PP.
Which commodity packaging plastic is used most often for detergent and oil bottles?
HDPE.
Which commodity packaging plastic forms the best live hinge?
PP.
Which commodity packaging plastic is used for thermoformed film when packaging luncheon meat?
PVDC.
Which commodity packaging plastic is lowest in cost?
LDPE.
Which commodity packaging plastic is made into soda bottles?
PET.
Which commodity packaging plastic is an exceptionally high-oxygen barrier but water-soluble?
EVOH.
Which commodity packaging plastic is an exceptionally high-oxygen barrier?
PVDC.
Which commodity packaging plastic is used for most hot-filled bottles?
PP.
Which commodity packaging plastic would be used to make a squeezable bottle?
LDPE.
Define stress.
Force producing or tending to produce deformation in a package divided by the area over which the force acts. Tensile and compressive stress act perpendicular to the area; shear stress acts parallel to it.
Define yield point and explain its practical significance.
The point at which permanent deformation begins. Packaging must withstand loads without reaching its yield point.
Define elongation and ultimate tensile strength.
Elongation is the increase in length of a tensile specimen at break or yield. Ultimate tensile strength is the maximum stress a material withstands before breaking.
What is static coefficient of friction (COF), and how does it differ from dynamic COF?
Static COF is the force needed to initiate sliding between surfaces. Dynamic COF is the friction force during continued movement.
What is tested when measuring dimensional change in plastic film, and when is it important?
Dimensional stability: the ability to retain original size and shape under environmental changes. It matters during heat processing, hot filling, and heat sealing, where shrinkage or distortion may occur.
Which plastic would you use to make a clear presentation box for a gold watch?
PS.
Name two materials used for heat sealing and state where each would be used.
Surlyn seals through fatty contaminants; metallocene is used when a stronger heat seal is required.
Why are many medical bottles molded from polypropylene rather than polyethylene?
Polypropylene can withstand steam sterilization.
Which two plastics would you most likely use for a microwave application?
PET and PA.
Which two materials are the best moisture barriers, and which two are the worst?
Best: PCTFE (Aclar) and PVDC (Saran). Worst: PA (nylon) and acrylonitrile copolymer (Barex).
What is the difference between chemical compatibility and stress-crack resistance?
Chemical compatibility means no significant chemical reaction occurs between the product and polymer. Stress-crack resistance concerns surface-initiated physical cracking under biaxial stress in the presence of an external agent, without chemical degradation.
How is expanded polystyrene made?
A blowing agent is incorporated into PS, expanding it into a low-density cellular foam.
What material are ice cream tubs made of, and why?
PS, because it can be steam sterilized.
What is a bioplastic?
A plastic developed from renewable resources such as cellulose, starch, or other biopolymers; it may or may not be biodegradable.
What is the feedstock for bio-based polyethylene?
Sugarcane-based ethanol or ethylene.
What is PLA made from, and what is its main attribute?
PLA is derived from starch sources such as corn, sugar, cassava, or sugarcane; it is industrially compostable.
Where is BPA used, and why is it being banned by governments?
It is used in polycarbonate bottles and metal-can linings. It is restricted because of concerns about cancer, obesity, and endocrine disruption.
What are plasticizers used for in packaging?
They impart flexibility or softness and assist processing.
What is hot tack?
The ability of a heat seal to withstand stress while the seal is still hot.