1/64
All 30 J-version questions as cards: groups, trends, bonds, VSEPR, metals, naming, reactions, FRQ, balancing, moles.
Valence electrons
Outermost electrons. Count = A-group column number (1A = 1 … 8A = 8). Middle block (Ti, Fe, Cu) does not follow this.
Same # of valence electrons as carbon?
Si (same column, 4A). Trap: Ti is a transition metal.
Group with 3 valence electrons that forms 3+ ions
Group 3A
Diatomic + highly effective at gaining one electron
Halogens (7A): F2, Cl2, Br2, I2
Atoms with 1-3 valence electrons
Lose them and become positive (1A → +1, 2A → +2, 3A → +3)
Atoms with 5-7 valence electrons
Gain electrons to reach 8 and become negative (6A → 2−, 7A → 1−)
Ionization energy (IE)
How hard it is to rip an electron off an atom
Electronegativity (EN)
How strongly an atom pulls shared electrons toward itself
Why are Be and Ba the least and most reactive in Group 2?
Be has high IE and loses electrons with difficulty; Ba has low IE and loses electrons easily
Metal reactivity trend
Increases going DOWN a group (lower IE, loses electrons more easily). Example: K is more reactive than Na.
Trap: answer choice says metals "gain electrons"
Always wrong. Metals lose electrons.
Going DOWN a group: radius, IE, EN
Radius goes up; IE goes down; EN goes down (more energy levels, electrons farther away)
Going ACROSS a period (left to right): radius, IE, EN
Radius goes down; IE goes up; EN goes up (more nuclear charge pulls electrons in)
Why does atomic radius increase down a group?
More energy levels are added, increasing the distance between the nucleus and the valence electrons
Why does IE increase left to right across a period?
Increase in nuclear charge, which increases attraction between protons and valence electrons (never because of neutrons)
Br has a smaller radius than I and Se because Br has…
The smallest number of energy levels (vs I) and the largest effective nuclear charge (vs Se)
Rank O, S, Ga, Cs, Fr from highest to lowest EN
O > S > Ga > Cs > Fr (Fr is lowest, bottom-left)
N, O, F ranked greatest to smallest: radius and IE
Radius: N, O, F. IE: F, O, N
Where is the biggest atom? Where are the highest IE and EN?
Biggest atom: bottom-left (Fr). Highest IE and EN: top-right (F)
Two of the same atom bonded (F2, N2)
Nonpolar covalent: electrons shared equally
Two different nonmetals bonded
Polar covalent: electrons shared unequally
Metal + nonmetal bonded
Ionic: electrons transferred (MgO, NaCl)
Polar covalent molecule out of XeF4, O3, HF, N2, MgO
HF
Molecule with a bond where electrons are shared equally: CO, NH3, HCl, N2, H2O
N2
When two F atoms form F2, the two bonding electrons are…
Shared equally
When is a molecule nonpolar overall?
Symmetric shape: identical atoms around the center and no lone pairs on the center, so the pulls cancel
Nonpolar structure out of CHCl3, PCl3, SO2, H–C≡C–H, ethanol
H–C≡C–H (C2H2): linear and symmetric
Hydrogen bonding requirement
H bonded directly to F, O, or N ("H grabs FON")
How many exhibit hydrogen bonding: H2S, HCl, PH3, SiH4?
0 (no H attached to F, O, or N)
Electron groups (VSEPR)
Atoms attached to the center + lone pairs on the center (a double bond counts as 1 group)
Lone pairs on the center atom (when bonded to F or Cl)
(Center's valence electrons − number of atoms attached) ÷ 2
Electron group geometry for 2 / 3 / 4 / 5 / 6 groups
Linear / trigonal planar / tetrahedral / trigonal bipyramidal / octahedral
4 electron groups with 1 lone pair; with 2 lone pairs
1 LP: trigonal pyramidal. 2 LP: bent
5 electron groups with 1, 2, 3 lone pairs
1 LP: seesaw. 2 LP: T-shaped. 3 LP: linear
6 electron groups with 1, 2 lone pairs
1 LP: square pyramidal. 2 LP: square planar
Molecular geometry of ClF3
T-shaped (3 atoms + 2 lone pairs = 5 groups)
Electron group geometry of OF2
Tetrahedral (2 atoms + 2 lone pairs = 4 groups). Bent is the molecular shape, which is the trap.
Electron group geometry of SO4 2−
Tetrahedral (4 O atoms, no lone pairs on S)
Electron group geometry vs molecular geometry
Electron group geometry counts lone pairs as groups; molecular geometry describes only where the atoms are
Why are metals good conductors of heat?
Free-moving "sea of" electrons rapidly carry heat energy through the metal (both J keys have the wrong letter here)
Sea of electrons model
Positive metal ions in a sea of delocalized electrons: conducts heat and electricity, shiny, malleable
NOT a sea of electrons but often confused with metals: Na, brass, Cr, graphite, Hg
Graphite (carbon is a nonmetal)
Name S2F10
Disulfur decafluoride
Prefixes 1-10
Mono, di, tri, tetra, penta, hexa, hepta, octa, nona, deca (no "mono" on the first element)
Definitive sign of a chemical reaction (J version)
Iron nail develops a flaky orange crust in water (rust is a new substance)
Physical changes (NOT reactions)
Melting, freezing, crushing, boiling off water
Reaction types
Element + compound = single replacement. Compound + compound = double displacement. One → many = decomposition. CxHy + O2 = combustion
AgNO3 + CaCl2 →
AgCl + Ca(NO3)2
Ca + AgCl →
CaCl2 + Ag
Lithium sulfate + lead(II) acetate (aq): what is in the balanced molecular equation?
2 LiC2H3O2 (aq). PbSO4 is the solid that forms.
Solubility shortcut
Compounds with Li, Na, K, NH4, nitrate, or acetate are (aq)
NOT a balanced decomposition reaction
NaHCO3 → Na2CO3 + H2O + CO2 (Na: 1 on the left vs 2 on the right; it needs 2 NaHCO3)
FRQ: word equation
Potassium carbonate + calcium nitrate → potassium nitrate + calcium carbonate
FRQ: unbalanced formula equation
K2CO3 + Ca(NO3)2 → KNO3 + CaCO3
FRQ: balanced formula equation
K2CO3 + Ca(NO3)2 → 2 KNO3 + CaCO3
FRQ: type of reaction
Double displacement
Combustion balancing order
C first, H second, O last. If O2 ends up as a fraction, double everything.
C2H2 combustion: coefficient on O2
5 (2 C2H2 + 5 O2 → 4 CO2 + 2 H2O)
C5H10 combustion: sum of coefficients
The real math is 2 + 15 + 10 + 10 = 37, which isn't a choice. The key says 31: bubble 31 and show the 37 work.
Al2(CO3)3 + H3PO4 → AlPO4 + CO2 + H2O coefficients
1, 2, 2, 3, 3
Grams to moles
Grams ÷ molar mass (show work)
Molar mass of CaCl2
40.08 + 2(35.45) = 110.98 g/mol
Moles in 198.40 g CaCl2 (J-19)
198.40 ÷ 110.98 = 1.79 mol
Moles in 127.27 g CaCl2 (J-20)
127.27 ÷ 110.98 = 1.15 mol
Ion charges to know
Ag+, K+, Li+, Ca2+, Pb2+, NO3−, Cl−, CO3 2−, SO4 2−, C2H3O2−