1/56
Looks like no tags are added yet.
rocker arm
a pivoting lever that transfers the camshaft's motion to open a valve. (one of the 2 most-used terms)
valve train
the complete set of parts (camshaft, rockers, valves, springs) that operate the valves. (one of the 2 most-used terms)
push rod valve assembly
a valve-operating system where rods transmit motion from a lower camshaft up to rocker arms.
design
the plan or arrangement of a part or system.
include
to contain or have something as part of a whole.
Variable Valve Timing (VVT)
a system that adjusts when the valves open and close for better performance and efficiency.
Electronic Lift Control
an electronic system that adjusts how far a valve opens.
engage
to connect or interlock with another part so it starts working.
disengage
to disconnect or release from another part.
drive train
the group of components that deliver power from the engine to the wheels.
transfer
to move or pass something from one place or part to another.
rate of spin
how fast something rotates.
idle
an engine running at low speed while not being driven, e.g. when the vehicle is stationary.
arrangement
the way parts are organised or positioned.
variable speed transmission
a transmission that can change its gear ratio to vary output speed.
differential
a gear system that lets a vehicle's two wheels rotate at different speeds when turning.
drive shaft
a rotating shaft that transmits power from the transmission to the wheels.
conventional
traditional or standard; the usual type.
axle shaft
the shaft that transmits power from the differential to a wheel.
emphasis on sth.
special importance or attention given to something.
transmission
the system of gears that transfers engine power to the drive wheels.
transverse engine placement
an engine mounted sideways, with the crankshaft running left-right, rather than front-to-back.
transaxle
a single unit that combines the transmission and the differential/axle.
SUV
sport utility vehicle.
of the conditions
depending on the particular circumstances or state of something.
gear shift lever
the lever used by the driver to change gears.
spline
a series of ridges on a shaft that lock it to a matching part so they rotate together.
mainshaft
the central shaft in a transmission through which power passes.
bellhousing
the housing that covers the flywheel and clutch, connecting the engine to the transmission.
synchro
short for synchronizer; a part that matches the speed of two gears before they engage, for smooth shifting.
synchronizer gear
the gear mechanism that equalises the speed of two gears before they engage.
gear
a toothed wheel that meshes with another to transmit motion; also, a specific transmission ratio.
overdrive
a high gear ratio that lets the engine run at lower RPM for a given road speed.
clutch
a device that connects and disconnects the engine from the transmission.
to ease-out
to release something gradually and smoothly, e.g. a clutch pedal.
clutch disc
the disc that presses against the flywheel to transmit engine power through the clutch.
flywheel
a heavy rotating disc that smooths out the engine's power delivery.
occur
to happen or take place.
spring
a coiled metal part that stores energy and pushes back when compressed or stretched.
bolted
fastened in place using a bolt.
absorb
to take in or soak up, e.g. force or vibration.
rattling
making a rapid series of short, sharp knocking sounds.
splined mainshaft
a mainshaft with ridges (splines) cut into it so gears can slide along it while still turning with it.
notch
a small V-shaped or angular cut in a surface or edge.
moisture
small amounts of water present in the air or on a surface.
torque convertor
a fluid coupling that transmits engine power to an automatic transmission.
viscosity
the thickness of a fluid and its resistance to flowing.
kinetic energy
the energy an object has because it is moving.
universal joints
joints that allow a rotating shaft to bend while still transmitting power.
sway
to move slowly and unsteadily from side to side.
U-joint
universal joint; a joint that allows a rotating shaft to bend and still transmit power.
CV-joint
constant velocity joint; a joint that transmits power at a constant speed even at an angle.
dent
a hollow, dimpled mark left by an impact or pressure.
inherent
existing as a natural or basic part of something.
half shaft
one of the two shafts that carry power from the differential to each driven wheel.
rubber "boots"
flexible rubber covers that protect joints, e.g. CV joints, from dirt and moisture.
hollow
empty inside; having a hole or space within.