1/39
Flashcards covering primary pharmaceutical production, unit operations, excipient functionality, release mechanisms, scale-up yield calculations, and formulation development.
What is the fundamental distinction highlighted between an API and a finished drug product?
A drug is not just an API; manufacturing must create the API, convert it into a usable dosage form, and consistently deliver the correct dose at the correct release rate.
What are the three stages summarized in the manufacturing concept API→PRODUCT→PATIENT?
Primary production creates the API, formulation and secondary production convert it into a dosage-form product, which is then administered to the patient.
In pharmaceutical manufacturing, what is the key difference between primary production and secondary production?
Primary production changes the chemical or biological material (API focus), whereas secondary production changes the dosage form (dosage-form focus).
What are the five steps that make up the pharmaceutical manufacturing chain?
01 Starting materials (chemicals / biological feed), 02 Primary production (make + purify API), 03 Formulation (blend API + excipients), 04 Secondary production (granulate / compress / coat), and 05 Finished product (test + pack + release).
Which specific unit operations are categorized under secondary production in the manufacturing chain?
Granulate, compress, and coat.
What are the three production routes used to manufacture Active Pharmaceutical Ingredients (APIs)?
Chemical synthesis, biotechnology, and extraction.
How is chemical synthesis defined for API production, and what are two examples?
Reactions build or modify molecules; examples include aspirin and ibuprofen.
How does biotechnology produce APIs, and what are two examples?
Cells or microorganisms produce the API; examples include antibiotics and proteins.
How are APIs produced via extraction, and what are two examples?
The API is isolated from natural material; examples include digoxin and heparin.
Whichever production route is used, what four parameters must the isolated API be controlled for?
Identity, purity, particle properties, and moisture.
What are the four core unit operations of primary production used to isolate a usable API?
1 Reaction, 2 Crystallisation, 3 Filtration, and 4 Drying.
What are the main functions of the reaction and crystallisation steps in primary production?
Reaction creates the target molecule under controlled temperature, mixing, and time; crystallisation purifies the molecule and creates crystals with a suitable size distribution.
What are the main functions of the filtration and drying steps in primary production?
Filtration retains the solid API while the liquid phase passes through; drying removes water or solvent to protect stability and powder flow.
Why is an API alone rarely suitable to be administered directly as a medicine?
The dose may be too small to handle, difficult to compress, unstable, poorly soluble, or unpleasant to take.
What components constitute a formulation according to the lecture equation?
Formulation=API+excipients+process choices
What is the function of a diluent, and what are two common examples?
A diluent adds bulk to the tablet; examples include lactose and MCC (microcrystalline cellulose).
What is the function of a binder, and what are two common examples?
A binder holds particles together; examples include povidone and starch.
What is the role of a disintegrant, and which specific excipient is cited as an example?
A disintegrant breaks the tablet apart; an example is croscarmellose.
How do glidants and lubricants differ in function, and what examples are given for each?
A glidant improves powder flow (e.g., colloidal silica), whereas a lubricant reduces friction during processing (e.g., magnesium stearate).
What is the role of a coating, and what examples of coating polymers are mentioned?
A coating protects the core or controls release; examples include HPMC and enteric polymers.
In the worked paracetamol tablet example, what is the API strength and the total tablet weight?
The tablet strength is 500.0mg of paracetamol (API), and the total tablet weight is 680.5mg.
How is the drug load of the paracetamol tablet calculated?
680.5mg500.0mg×100%=73.5%
In the paracetamol tablet example, what are the specific quantities of microcrystalline cellulose and magnesium stearate per tablet?
Microcrystalline cellulose is 89.0mg/tablet and magnesium stearate is 6.0mg/tablet.
What three major categories of factors control drug bioavailability?
Physiological factors (GI pH, food, gastric emptying), physicochemical factors (pKa, solubility, stability, particle size), and dosage form factors (excipients, process, release system).
How do decreasing API particle size and increasing disintegrant levels alter tablet performance?
Decreasing API particle size increases total surface area leading to faster dissolution, while increasing disintegrants accelerates tablet breakup leading to faster release.
How do increasing hydrophobic lubricant and applying an enteric coating alter drug release?
Increasing hydrophobic lubricant causes less wetting and slower release, whereas applying an enteric coating resists stomach acid to provide delayed release.
What characterizes an immediate-release dosage form?
Rapid disintegration and dissolution providing fast onset, though it may require repeated dosing.
What characterizes an extended-release dosage form?
The API is released over a longer period, maintaining therapeutic drug levels with fewer doses.
What is a delayed-release dosage form, and what clinical precaution applies to modified-release products?
Drug release starts later (often after passing the stomach) via an enteric coating responding to GI conditions; modified-release products should not be crushed or split unless the label specifically allows it.
What are the four major quality attributes evaluated to verify that a drug meets standards until shelf-life expiry?
Correct dose (assay, content uniformity), mechanical quality (hardness, friability, appearance), reproducible release (disintegration, dissolution), and safety and stability (microbial limits, degradants).
What are the four main stability stresses that can degrade a drug product during shelf life?
Heat, moisture, light, and oxygen.
For a batch of 500,000 tablets with a tablet weight of 680.5mg, what is the theoretical batch mass?
680.5mg×500,000=340.25kg
If the theoretical batch mass is 340.25kg and actual collection after tableting is 331.3kg, what are the percentage yield and process loss?
% yield=340.25kg331.3kg×100%=97.4%, which corresponds to a process loss of 2.6%.
What is continuous manufacturing, and which ICH guideline provides its harmonised regulatory framework?
Connected unit operations run with continuous material flow, governed by the ICH Q13 framework for development, control, and lifecycle management.
What two examples of new dosage-form technologies are cited from the FDA's emerging technology program?
3D printing and ultra-long-acting oral formulations.
Why can a chemically pure API still perform poorly in drug formulation?
Physical properties matter: crystal form (polymorph and hydration state), particle size (flow, mixing, dissolution), residual solvent, and moisture can undermine performance even if chemical purity is high.
What five parameters do operators control during the crystallisation unit operation?
1 Supersaturation (driving force), 2 Cooling profile, 3 Seeding (promotes controlled nucleation), 4 Agitation (influences mixing and crystal breakage), and 5 Solvent choice (affects solubility and impurity rejection).
What is the sequence of downstream problems caused by generating too many fine crystals during crystallisation?
Too many fine crystals → slow filtration → longer drying → variable powder.
What are the five key process variables in the reaction step, and what rule governs the reaction endpoint?
Temperature, mixing, addition rate, reaction time, and pH / composition; the reaction endpoint should always be based on evidence rather than simply elapsed time.
What are the five steps in the structured formulation development cycle?
1 Understand the API, 2 Define the target, 3 Select excipients, 4 Prepare prototypes, and 5 Evaluate performance (iteratively refining until quality targets are met).