1/306
PRELIM
What should you do when you arrive at the microbiology laboratory?
Wash your hands with disinfectant soap when you arrive at the lab.
What should you do before leaving the microbiology laboratory?
Wash your hands with disinfectant soap again before you leave.
What is prohibited in the laboratory?
Absolutely no food, drinks, chewing gum, or smoking is allowed in the laboratory.
What should you not put in your mouth in the laboratory?
Do not put anything in your mouth such as pencils, pens, labels, or fingers.
Where should food not be stored?
Do not store food in areas where microorganisms are stored.
What protective clothing should be used in the laboratory?
Purchase a lab coat and safety glasses, bring them to class, and use them.
What alternative protective clothing is acceptable?
A long-sleeved shirt that buttons or snaps closed is acceptable protective clothing.
What requirements must the alternative protective clothing meet?
This garment must cover your arms and be able to be removed without pulling it over your head.
Where should protective clothing be left?
Leave protective clothing in the lab and do not wear it to other non-lab areas.
What type of clothing should be avoided in the laboratory?
Avoid loose fitting items of clothing.
What type of shoes are appropriate in the laboratory?
Wear appropriate shoes.
Are sandals allowed in the laboratory?
Sandals are not allowed in the laboratory.
How should the workspace be maintained?
Keep your workspace free of all unnecessary materials.
Where should backpacks, purses, and coats be placed?
Backpacks, purses, and coats should be placed in the cubbyholes by the front door of the lab.
Where should needed items be placed?
Place needed items on the floor near your feet, but not in the aisle.
What should be used to disinfect work areas?
70% ethanol or fresh 10% bleach.
When should work areas be disinfected?
Before and after use.
When should laboratory equipment and work surfaces especially be decontaminated?
Especially after spills, splashes, or other contamination.
How often should laboratory equipment and work surfaces be decontaminated?
On a routine basis.
How should everything in the laboratory be labeled?
Label everything clearly.
What should be done with caps on reagents, solution bottles, and bacterial cultures?
Replace caps on reagents, solution bottles, and bacterial cultures.
When should Petri dishes be opened in the laboratory?
Do not open Petri dishes in the lab unless absolutely necessary.
What should be done to inoculating loops and needles before laying them down?
Inoculating loops and needles should be flame sterilized in a Bunsen burner before you lay them down
How should microorganisms be treated in the laboratory?
Treat all microorganisms as potential pathogens.
What should be done when handling microorganisms?
Use appropriate care and do not take cultures out of the laboratory.
When should disposable gloves be worn?
Wear disposable gloves when working with potentially infectious microbes or samples (e.g., sewage).
What should be done when working with a sample that may contain a pathogen?
Be extremely careful to use good bacteriological technique.
What should be done to equipment and materials?
Sterilize equipment and materials.
How should pipetting be performed?
Never pipette by mouth
How should everything in the laboratory be considered?
Consider everything a biohazard.
Where should laboratory materials be discarded?
Do not pour anything down the sink.
What should be done to liquids and broth cultures before discarding them?
Autoclave liquids and broth cultures to sterilize them before discarding.
Where should solid waste material be placed?
Dispose of all solid waste material in a biohazard bag and autoclave it before discarding in the regular trash.
What safety equipment should laboratory personnel familiarize themselves with?
Eye-wash station, shower, sinks, fire extinguisher, biological safety cabinet, first aid kit, emergency gas valve.
Where should broken glass be discarded?
In the broken glass container.
Where should razor blades, syringe needles, and sharp metal objects be discarded?
In the “sharps” container.
When should spills and accidents be reported?
Immediately to your instructor.
How should small spills be handled?
Clean small spills with care.
What should be done for large spills?
Seek help for large spills.
When should injuries or accidents be reported?
Immediately to the instructor, no matter how small they seem
What is biosafety?
“The discipline addressing the safe handling and containment of infectious microorganisms and hazardous biological materials”.
How is the practice of safe handling of pathogenic microorganisms and their toxins in the biological laboratory accomplished?
Through the application of containment principles and the risk assessment.
Why do we need biosafety?
Laboratory has hazards of infectious agents; it can post accidental threats to workers and environment; to have adherence with safety regulations while dealing with infectious agents
What are the 3 reasons why biosafety is needed?
Laboratory has hazards of infectious agents 2. It can post accidental threats to workers and environment 3. To have adherence with safety regulations while dealing with infectious agents
What is containment?
Containment is defined in levels that increase in complexity as the risk associated with the work in the microbiological laboratory increases
What are the 2 types of containments?
Primary containment; Secondary containment
What is primary containment?
Provides immediate protection to the workers in the biological laboratory from exposure to chemical and biological hazards.
What do primary barriers include?
Biosafety Cabinet (BSC); Fume hoods; Other engineering devices
What is a Biosafety Cabinet (BSC)?
Biosafety cabinets (BSCs) are primary means of containments, developed for working safely with infectious micro-organisms
What does the overall biosafety program require?
Good microbiological practices; Primary containment equipment; Primary containment facility design
What does a biosafety cabinet provide protection to?
Personnel handling the infectious material; Environment by preventing the release of the microbes; Particular product or specimen from contamination
What are the 3 areas protected by a biosafety cabinet?
Personnel handling the infectious material; Environment by preventing the release of the microbes; Particular product or specimen from contamination
What is an important feature of a biosafety cabinet?
HEPA Filter
What does HEPA stand for?
High efficiency particulate air filter
What does a HEPA filter remove?
The most penetrating particle size (MPPS) of 0.3 um
What is the efficiency of a HEPA filter?
At least 99.97%.
What is the typical HEPA filter?
A single sheath of borosilicate fibers treated with a wet-strength water repellant binder
What are the classifications of biosafety cabinet?
BSC CLASS I; BSC CLASS II; BSC CLASS III
What is the obvious feature of BSC Class I?
Open fronted (obvious feature)
What protection does BSC Class I provide?
Provides personal protection and environment protection but not product or specimen protection
What can BSC Class I protect?
Can protects the personnel but does not provide maximum protection at all
Can BSC Class I process infectious sample?
Cannot process infectious sample, it won’t ensure your protection
What is the exhaust system of BSC Class I?
Hepa Filter
How does air enter BSC Class I?
Unfiltered room air is drawn in through the work opening and across the surface
What can happen to the air processed inside BSC Class I?
It can be recirculated
What is the opening of BSC Class II?
Half Open
Where is BSC Class II commonly used?
Commonly used in the hospitals
What does BSC Class II protect?
Protects the personnel, environments and product
What is the feature of BSC Class II?
Laminar Air Flow Principle
What are the sub-types of BSC Class II?
A1; A2; B1; B2
What is the interior design of BSC II A1?
May have contaminated air under negative pressure
What happens to the air in BSC II A1?
All are recirculated inside
What chemicals are used in BSC II A1?
No chemicals at all (only biological sample only)
What is the interior design of BSC II A2?
It has negative pressure but with flexible connection
What happens to the air in BSC II A2?
Most or all recirculated
What chemicals are allowed in BSC II A2?
Minute volatile chemicals only
What is the interior design of BSC II B1?
Biological Sample
What happens to contaminated air in BSC II B1?
Have negative pressure but the air or contaminated air is exhausted outside
What type of duct does BSC II B1 have?
HARD DUCT
What happens to most or all of the air in BSC II B1?
Most or all are exhausted outside
What happens to most of the air in BSC II B2?
Most are exhausted outside
What chemicals are allowed in BSC II B2?
Small chemicals only
What is the main structural feature of BSC Class III?
Totally enclosed; only hand will go inside the gloves area
What type of organisms is BSC Class III used for?
Used for highly infectious material organisms
What level of protection does BSC Class III offer?
Offers maximum protection is offered
What does the HEPA filter do in BSC Class III?
Supply and exhaust air
What type of pressure does BSC Class III have?
Has a negative pressure cabinet
How restricted is the area where BSC Class III is located?
The area in which the BSC CLASS III is located strictly restricted
What is secondary containment?
Is intended to protect the laboratory worker, the community and the environment from unintended contamination with a biological hazard
What does secondary containment offer?
Offers protection to yourself and the laboratory workers
What is the best example of secondary containment?
PPEs (laboratory coats, mask, safety goggles)
What are examples of PPEs?
Laboratory coats, mask, safety goggles
What are biosafety levels?
Biosafety levels are selected to provide the end-user with a description of the minimum containment required for handling different microorganisms safely in a laboratory setting and reduce or eliminate exposure to potentially hazardous agents.
How are biosafety levels classified by risk?
Minimal Risk → Moderate Risk → High Risk → Extreme Risk
What is Biosafety Level 1?
BIOSAFETY LEVEL 1 (Minimal Risk)
What is known about BSL-1 organisms?
It is not known to cause disease in healthy adults
What are the example organisms of BSL-1?
Bacillus subtilis; Mycobacterium gordonae; Soil microbes
What are BSL-1 practices?
Work can be performed on an open table or bench; Biosafety Cabinet Class I (BSC Class I) is appropriate to use; PPE; Sink; Lab doors separate
Where can BSL-1 work be performed?
On an open table or bench
Which BSC is appropriate for BSL-1?
Biosafety Cabinet Class I (BSC Class I)