1/217
Looks like no tags are added yet.
ARM instruction set architecture
Reduced Instruction Set Computing used in mobile and embedded devices
BGA socket type
Ball Grid Array permanently soldered to the motherboard
CISC vs RISC
CISC has complex instructions while RISC has simple fixed-length instructions
CPU core
Independent processing unit within a CPU capable of executing tasks
CPU multiplier
Factor that multiplies the base clock to determine the CPU frequency
CPU thread
Virtualized division of a core that handles instruction streams concurrently
LGA vs PGA
LGA has pins on the socket while PGA has pins on the CPU
Hyper-threading
Intel technology allowing a single core to handle two threads simultaneously
L1 cache
Smallest and fastest cache located closest to the CPU core
L2 cache
Medium size cache that balances speed and capacity
L3 cache
Largest cache shared among multiple cores
LGA socket type
Land Grid Array where pins are on the motherboard
Overclocking
Running a CPU at a higher frequency than its base clock
PGA socket type
Pin Grid Array where pins are on the CPU
Turbo Boost
Technology that temporarily increases CPU frequency above base clock
x86 instruction set architecture
Complex Instruction Set Computing used by Intel and AMD
External HDD
Cost-effective and portable but slower than SSD options
External SSD
Portable with high-speed performance suitable for large file transfers
HDD
Traditional spinning disk storage that is slower but more cost-effective for large capacities
NAS
Network-attached storage for centralized file sharing and backups
NVMe
High-speed storage interface designed for SSDs using PCIe lanes
RAID 0
Striping across multiple drives for performance but lacks redundancy
RAID 1
Mirroring data across drives for redundancy but halves available capacity
RAID 10
Combines striping and mirroring for both performance and redundancy, requiring an even number of drives
RAID 5
Stripes data with distributed parity for performance and redundancy but requires at least three drives
RAID 6
Similar to RAID 5 but uses double parity for higher fault tolerance, requiring at least four drives
SAN
Storage area network for high-performance enterprise data access
SAS
High-performance storage interface for enterprise environments
SATA
Common storage interface for HDDs and SSDs with slower speeds than NVMe
SSD
Solid-state storage with faster speeds and no moving parts compared to HDD
20
How many pins are in a DisplayPort connector?
19
How many pins are in a standard HDMI Type A connector?
9
How many pins does a USB 3.0 Type-A connector have?
24
How many pins does a USB Type-C connector have?
Shielding
What cable characteristic is vital for ensuring signal integrity over long distances?
Universal Serial Bus
What does USB stand for?
40 Gbps
What is the maximum data rate of Thunderbolt 3?
480 Mbps
What is the maximum data rate of USB 2.0?
5 Gbps
What is the maximum data rate of USB 3.0?
10 Gbps
What is the maximum data rate of USB 3.1 Gen 2?
20 Gbps
What is the maximum data rate of USB 3.2 Gen 2x2?
5 meters
What is the recommended maximum cable length for USB 2.0 devices?
3 meters
What is the recommended maximum cable length for USB 3.x devices?
VGA
Which analog video standard is characterized by a 15-pin connector and is commonly found in older devices?
Twisted pair
Which cable construction uses multiple twisted pairs to reduce crosstalk?
HDMI
Which cable is most common for digital high-definition video and audio connectivity?
Stranded conductor
Which conductor type offers greater flexibility but slightly higher signal attenuation?
DisplayPort 1.4
Which DisplayPort version first supported 8K resolution at 60 Hz?
Mini HDMI (Type C)
Which HDMI connector type is commonly found on cameras and tablets?
Micro HDMI (Type D)
Which HDMI connector type is smallest and used for micro devices?
HDMI 2.1
Which HDMI version added enhanced Audio Return Channel (eARC) and supports up to 48 Gbps?
HDMI 2.0
Which HDMI version introduced support for 4K resolution at 60 Hz?
DisplayPort
Which interface is used for computer monitors with features like daisy chaining and multi-stream transport?
USB Type-C
Which port standard uses a reversible connector supporting data video and power?
USB 2.0
Which USB specification introduced USB On-The-Go (OTG) functionality?
USB4
Which USB standard integrates protocols such as PCI Express and DisplayPort and supports up to 40 Gbps?
IPv4
Internet Protocol version 4; 32 Bits
IPv6
Internet Protocol version 6; 128 Bits
Private IP address
Usable only on private networks. Can not be routed through the Internet
Public IP address
Usable on both private and public networks. Can be routed through the Internet, as long as the IP Address is unique
IPv4 Class A Range
1.0.0.0 to 126.0.0.0
IPv4 Class B Range
128.0.0.0 to 191.255.255.255
IPv4 Class C Range
192.0.0.0 to 223.255.255.255
Private Class A Range
10.0.0.0 to 10.255.255.255
Private Class B Range
172.16.0.0 to 172.31.255.255
Private Class C Range
192.168.0.0 to 192.168.255.255
IPv4 Loop-back Address
127.0.0.1
APIPA Range
169.254.0.0 to 169.254.255.255
NAT
Network Address Translation. Translates IP Addresses between different networks. Typically between a public and private network
IPv6 Link-Local
IPv6 version of APIPA. Automatically configured, and only usable on local segment. (fe80::/64)
IPv6 Site-Local
IPv6 version of Private Addressing. Only usable within a single organization or site. Not usable on Internet. (fc00::/7)
IPv6 Global
IPv6 version of public addresses. Must be unique and are usable on the Internet.
Unicast
Delivered to one interface or node
Multicast
Delivered to a group of interfaces or nodes
Anycast
Delivered to the nearest interface
Broadcast
Delivered to any interface or node in the same LAN. IPv4 only.
CIDR Notation
A method for allocating IP addresses and routing that uses a suffix (e.g. /24) to indicate the network prefix length instead of traditional classes
Default Gateway
The network node that acts as the primary forwarding point for traffic destined for networks outside the local subnet; typically a router
DHCPv6
A protocol that assigns IPv6 addresses and configuration parameters to devices from a central server similar to DHCP in IPv4
Maximum Transmission Unit (MTU)
The largest size of an IP packet that can be transmitted in a single network layer transaction without requiring fragmentation
NAT vs PAT
A comparison where NAT translates whole IP addresses while PAT allows multiple devices to share a single IP address by differentiating sessions using port numbers
Subnet Mask
A 32-bit number used in IPv4 to divide the address into network and host portions; common notation is 255.255.255.0
IP
Internet Protocol
Reserved IPv4 Addresses
Special IPv4 addresses such as 0.0.0.0 for the default route and 255.255.255.255 for broadcast that are reserved for specific network functions
TCP Protocol
When someone says it's a TCP based protocol, it means that the connection is reliable and it guarantees the data to be transferred...it's called a "connection oriented communication" & ensures the data gets there using acknowledgements.
UDP Protocol
Does not guarantee data transfer...it's a best effort. It basically sends data and hopefully the receiver gets the data. If they get it then they get it, but if they don't then too bad...the server won't be resending it.
PORT 20/21
FTP (File Transfer Protocol), TCP used to transfer files over authenticated connections
PORT 69
TFTP (Trivial File Transfer Protocol), UDP it does't guarantee the data like TCP of FTP, but it's quicker. There is no authentication or encryption. You probably use this more to connect to network devices. For example, I'm going to connect my computer to the router and update its operating system is where this is typically used
PORT 22
SSH (Secure Shell),TCP provides encrypted command line access by creating a secure tunnel
PORT 23
Telnet, TCP, administrators use to connect remotely to a server and issue commands via a command-line interface. Telnet is not commonly used in networks anymore because all of the commands sent back and forth to the server are passed without any encryption or protection. Therefore, telnet is a security risk and has been mostly replaced by SSH (Port 22)
PORT 25
SMTP (Send Mail Transfer Protocol), TCP an SMTP server uses the SMTP protocol to send emails from one server to another. If your mail client cannot send an email properly, it is likely an issue with your SMTP server.
PORT 53
DNS (Domain Name System), TCP/UDP this is what translates those domain names to ip address...without it the internet wouldn't work
PORT 80
HTTP (Hypertext Transfer Protocol), TCP is used to transfer webpages in the clear
PORT 443
HTTPS (Hyper Text Transfer Protocol Secure), TCP is used for HTTPS traffic. Therefore, this port must be opened. This is secure web browsing over SSL or TLS
PORT 110
POP3 (Post Office Protocol), TCP is used to download incoming mail
PORT 143
IMAP (Internet Message Access Protocol), TCP is used to synchronize incoming mail
PORT 3389
RDP (Remote Desktop Protocol), TCP/UDP is used to securely remote access a Windows desktop
PORT 427
SLP (Service Location Protocol), TCP used for Windows to find the different devices and connections within your network
PORT 548
AFP (Apple Filing Protocol), TCP provides file sharing capabilities to macOS devices
PORT 161/162
SNMP (Simple Network Management Protocol), UDP is used to query, configure, and monitor host on LAN