1/61
Vocabulary flashcards covering core definitions, laws, and equations across Mechanics, Waves, and Electricity & Electromagnetism from the NCEA Level 2 Physics curriculum.
Displacement
The change in position from the starting point to the finishing point, including direction; it is a vector.
Distance
The total path travelled; it is a scalar quantity.
Gradient of a Displacement–Time Graph
Represents velocity. A steeper gradient indicates a greater speed, while a negative gradient represents motion in the opposite direction.
Gradient of a Velocity–Time Graph
Represents acceleration. A positive gradient indicates positive acceleration, and a negative gradient indicates negative acceleration.
Area Under a Velocity–Time Graph
Represents displacement, where areas below the time axis count as negative displacement.
Constant-Acceleration Equations
Kinematic equations describing motion under uniform acceleration: v=u+at, s=ut+21at2, v2=u2+2as, s=21(u+v)t, and a=ΔtΔv.
Acceleration Due to Gravity
The downward acceleration experienced by a freely falling object near Earth's surface when air resistance is negligible, equal to approximately 9.8m s−2.
Terminal Velocity
The constant speed reached by a falling object when upward air resistance balances downward weight, making resultant force and acceleration equal to zero.
Resultant Force
The single force that has the same overall effect as all the individual forces acting together; it is the vector sum of all forces.
Newton's First Law
If the resultant force on an object is zero, it remains at rest or continues to move at a constant velocity; its velocity changes only when acted upon by a resultant force.
Newton's Second Law
The resultant force acting on an object equals its mass multiplied by its acceleration (F=ma), with acceleration occurring in the direction of the resultant force.
Newton's Third Law
When two objects interact, each exerts an equal-sized force in the opposite direction on the other; these action–reaction forces act on different objects.
Equilibrium
The state of an object where both the resultant force and resultant torque are zero, resulting in zero linear acceleration and zero angular acceleration.
Torque (Moment)
The turning effect of a force, calculated as force multiplied by the perpendicular distance from the pivot (τ=Fd).
Hooke's Law
For a spring stretched within its elastic limit, the applied force is directly proportional to extension: F=kx, where k is the spring constant.
Centripetal Acceleration
The acceleration directed towards the centre of a circular path that continuously changes the direction of velocity, given by ac=rv2.
Centripetal Force
The inward resultant force required to maintain circular motion (Fc=rmv2), which can be provided by tension, friction, gravity, or a normal force.
Momentum
A vector quantity defined as an object's mass multiplied by its velocity (p=mv), acting in the direction of velocity.
Conservation of Momentum
The principle that total momentum before an interaction equals total momentum after in an isolated system with zero resultant external force.
Impulse
The change in momentum produced by a force, calculated as Δp=FΔt for a constant resultant force, and equal to the area under a force–time graph.
Work
The energy transferred by a force acting through a displacement in the direction of that force, calculated as W=Fd.
Power
The rate of energy transfer, calculated as P=tW and measured in watts.
Amplitude
The maximum displacement of a wave from its equilibrium position.
Wavelength
The distance between consecutive points that are in phase on a wave.
Frequency
The number of wave cycles per second, measured in hertz (Hz).
Period
The time required for one complete wave cycle, related to frequency by f=T1.
Wave Equation
The relationship stating that wave speed equals frequency multiplied by wavelength: v=fλ.
Wave Pulse
A single disturbance that travels through a medium, transferring energy without transferring matter overall.
Principle of Superposition
The principle that when two overlapping pulses or waves meet, the resultant displacement is the algebraic sum of their individual displacements at each point.
Constructive Interference
The interaction that occurs when two waves meet in phase, causing their displacements to add together and produce a larger resultant amplitude.
Destructive Interference
The interaction that occurs when two waves meet out of phase, causing their displacements to partially or completely cancel each other.
Diffraction
The spreading out of waves after passing through a gap or slit, which is greatest when the gap width is similar to the wavelength.
Refractive Index
A measure of how much light slows down in a material, given by n=vc, where c is light speed in a vacuum and v is light speed in the material.
Snell's Law
The formula governing refraction across a boundary between two media: n1sin(θ1)=n2sin(θ2), where angles are measured from the normal.
Total Internal Reflection (TIR)
The phenomenon where light is completely reflected inside a higher-index medium when it hits a boundary with a lower-index medium at an angle of incidence greater than the critical angle.
Critical Angle
The angle of incidence in a higher-index medium that produces a refracted ray at 90∘ to the normal; for a material-to-air boundary, it satisfies sin(C)=n1.
Principal Focus (Converging Lens)
The point on the principal axis where rays travelling parallel to the principal axis converge and meet after passing through the lens.
Thin Lens Equation
The relationship between focal length (f), object distance (do), and image distance (di): f1=do1+di1.
Real Image
An image formed where light rays actually meet and intersect, which can be projected onto a screen.
Virtual Image
An image formed where light rays appear to diverge from a point behind a mirror or lens but do not actually meet, meaning it cannot be projected onto a screen.
Electric Current
The rate of flow of electric charge, defined by I=tQ and measured in amperes (A).
Voltage (Potential Difference)
The electrical energy transferred per unit charge between two points, defined as V=QE and measured in volts (V).
Resistance
The opposition a component offers to the flow of electric current, defined as R=IV and measured in ohms (Ω).
Ohm's Law
For a conductor at constant temperature, the voltage across it is directly proportional to the current through it: V=IR.
Electric Field
A region of space where an electric charge experiences an electric force.
Electric Field Strength
The electric force exerted per unit positive charge, defined as E=qF, or E=dV across parallel plates separated by distance d.
Motor Effect
The force experienced by a current-carrying conductor when placed in an external magnetic field due to the interaction between magnetic fields.
Magnetic Force on a Wire
The force acting on a current-carrying wire perpendicular to a magnetic field, given by F=BIL, where B is field strength, I is current, and L is wire length in the field.
Magnetic Force on a Moving Charge
The force experienced by a charged particle moving perpendicular to a magnetic field, given by F=Bqv, directed perpendicular to both velocity and field.
Induced Voltage
The potential difference produced across a straight conductor moving perpendicular through a magnetic field, calculated as V=BvL.
Projectile Motion
The two-dimensional curved motion of an object where horizontal velocity remains constant while vertical velocity changes due to constant downward acceleration under gravity.
Resolving a Force
The process of splitting a single force vector into two perpendicular components, typically horizontal and vertical, using trigonometry.
Resistors in Series
A circuit arrangement where the same current passes through each component in turn, with the equivalent resistance given by RT=R1+R2+….
Resistors in Parallel
A circuit arrangement where each branch experiences the same potential difference, with the equivalent resistance given by RT1=R11+R21+….
Electrical Power
The rate at which electrical energy is converted or transferred by a component, calculated as P=IV and measured in watts (W).
Uniform Electric Field
A region where the field strength and direction are constant at every point, visually represented by parallel, equally spaced field lines.
Work Done on an Electric Charge
The energy transferred when moving a quantity of charge through an electric potential difference, given by W=qV.
Force on a Charge in an Electric Field
The electric force exerted on a charged particle placed within an electric field, calculated as F=qE.
Conditions for Total Internal Reflection
Light must travel from a medium with a higher refractive index towards one with a lower refractive index, and the angle of incidence must exceed the critical angle.
Refraction Bending Rules
A wave bends towards the normal when entering a medium where it travels slower, and bends away from the normal when entering a medium where it travels faster.
Magnification in Optics
The ratio of image height to object height, or image distance to object distance, calculated as m=hohi=dodi.
Circular Path of a Charged Particle
The trajectory formed when a magnetic force acts perpendicular to a moving charge's velocity (F=Bqv), providing centripetal acceleration without altering its speed.