1/29
Looks like no tags are added yet.
Connecting devices
Devices in an organisation need to communicate:
with each other
with shared devices such as printers and scanners
with the internet
Network interface
Every computer attached to a network must have an electronic circuit called a network interface controllers which is also know as a network interface card. in modern PC’s and laptops these are built in.
Wired connections
copper cables, include Cat5a,Cat6, and Cat6a, are used in networks
Cat5e is cost effective and widely supported
What is Bluetooth ?
Bluetooth is a wireless method used for connecting devices like mice, keyboards, and audio devices, with a range of approximately 100 meters.
USB connection
USB is the most prevalent wired connection, supporting up to 127 devices and providing power to peripherals.
VGA, HDMI and Display port
These are video interconnects for connecting visual displays like monitors, projects, and TVs
HDMI
Supports digital sound transmission and is becoming the standard for video and sound connections
Parallel and serial
Are older technologies used for connecting printers and communication devices
Wired connections
Wired connections are preferred in business settings for their enhanced speed, reliability, and security.
WI-FI Direct
WI-FI Direct is used for connecting devices to remote displays, while Wi-Fi allows for wireless printing/scanning and connecting devices to local area networks (LANs) and wired area networks (WANs).
Technologies like Wi-Fi and Bluetooth
Technologies like Wi-Fi and Bluetooth enables wireless connections to networks, including corporate networks and mobile devices, a process know as tethering.
Fibre optic cable
Fibre optic cable is made from glass that becomes flexible when it is thin.
Digital information travels along fibre-optic cables such as light signals or photons at close to the speed of light, about 30 times faster than electrons travelling along copper cables
it has a maximin run length of up to 2km
Ethernet connectivity
ethernet is the standard technology for connecting LANs defined by a set of rules specifying the electrical characteristics of network devices.
The connecting twisted pair cable is often referred to as an ethernet cable
Benefits of Ethernet
ethernet provides greater bandwidth, faster data transmission, and improved productivity/efficiency
It offers enhanced security, stable signal strength and reduce the need for boosters
Ethernet connections do not radiate signals, making hacking more difficult
signal strength remains constant over distance, unaffected by environmental factors
Network hardware
computers in local area networks need switches to connect and route data packets between computers and the router. Packets contain source and destination addresses and data.
Network router
A router is used to connect two networks -typically to connect the LAN to the internet. The router is connected to the switch and to the internet via an internet service provider (ISP)
Wireless connections
Modern computers use wireless network adaptors to communicate via Wi-Fi signals, typically within a range of 50 meters or less
Ad-hoc mode allows peer -to-peer communication between wireless devices
Infrastructure mode enables communication with a central node and connected wired nodes
wireless access points are commonly used in large office buildings to create a single wireless local area network
Each access point may be