Refresher Set 1

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/64

encourage image

There's no tags or description

Looks like no tags are added yet.

65 Terms

1
New cards

Maximum normal stress theory


Which of the following predicts the failure stress reasonably well for brittle materials under static biaxial loading.

2
New cards

1

In absence of friction, a simple machine is an ideal machine if efficiency is

3
New cards

Screw

Which of following is a form of an inclined plane

4
New cards

1

What is thr ideal mechanical advantage of a machine that changes only the direction of the input force?

5
New cards

Turning pairs

Ackermann steering gear is made up of.

6
New cards

It meets ASME Boiler and Pressure Vessel Code requirements

What is the meaning of “U” stamp on a pressure vessel

7
New cards

Buckling

Which failure mode is most critical for long, slender columns under compressive load?

8
New cards

Slenderness ratio

What is the term for the ratio of a column's effective length to its radius of gyration?

9
New cards

Fixed support

Which condition provides both vertical reaction and moment resistance?

10
New cards

Principal normal stress

What is the combination of applied normal and shear stresses that produces maximum principal normal stress or minimum principal normal stresss, with a third principal stress between or equivalent to the extremes?

11
New cards

Tresca yield criterion

What is the other term for Maximum Shear Stress Theory, as a failure prediction theory?

12
New cards

Cubic os stationary curvature

In planar kinematics, what is the locus of points on a moving body that exhibits zero rate of change of curvature at a given instant?

13
New cards

Fatigue stress concentration factor

Which of the following is the ratio of the fatigue strength without a stress concentration to the fatigue stress with a stress concentration?

14
New cards

Miner's Rule

This is a theory in cyclic and impact loading, which states that damage at any stress level, is proportional to number of cycles. What is this theory commonly called?

15
New cards

6061 aluminum alloy


A storage tank for saline water requires a material that is lightweight, corrosion-resistant, and has good mechanical strength. Which material is the most suitable choice?

16
New cards

Link

It is one of the rigid members / bodies joined together to form a kinematic chain.

17
New cards

One link should be fixed

For a kinematic chain to be considered as mechanism

18
New cards

Pantograph

The mechanism used to enlarge or reduce moments for reproducing drawings to different scales is called

19
New cards

Pickering type

In gramophones for adjusting the speed of the turn-table, what type of governor is commonly used?

20
New cards

Continuous beam

What beam is carried by three or more supports, allowing the bending effects to be distributed along its span?

21
New cards

Section modulus

Which beam-section property is used as the ratio of moment of inertia to the distance from the neutral axis to the extreme fiber?

22
New cards

Resistance to buckling

For a compression member, what property is increased when the diameter of the column is made larger?

23
New cards

Neutral axis

In a beam under bending, what is the axis where the normal bending stress becomes zero?

24
New cards

Entire section remains in compression

If an eccentric compressive load acts within the kern of a column section, what stress condition exists over the whole cross-section?

25
New cards

Vickers test

It is also known as diamond pyramid hardness test, uses a pyramid shaped diamond indenter and a load that ranges from 1 kg to 120 kg.

26
New cards

Grashof's Law

"For a planar four-bar linkage, the sum of the shortest and longest lengths cannot be greater than the sum of the remaining two link lengths if there is to be a continuous relative rotation between two members." How do you call the preceding statement?

27
New cards

Drag-link mechanism

It is a Grashof four-bar mechanism in which the shortest link is the frame or fixed link and the other two cranks completely rotate with their axes. How do you call this Grashof four-bar mechanism?

28
New cards

Incompletely constraint

The motion of a shaft in a circular hole is an example of _____ motion.

29
New cards

Greater energy absorption prior to fracture

Which property best distinguishes a ductile material from a brittle one when analyzing a stress-strain diagram?

30
New cards

Square root of stiffness-to-mass ratio

In vibration analysis, which parameter governs the natural frequency of a simple spring–mass system?

31
New cards

Allegheny Ludlum alloy


Which superalloy is commonly utilized as a stainless-type material due to its high yield strength?

32
New cards

Displacement

Which term refers to the vector change in position of an object with respect to a reference point?

33
New cards

Radial acceleration

Which component of acceleration is directed inward toward the center of rotation in circular motion?

34
New cards

The point of contact

The instantaneous center of rotation of a rigid thin disc rolling without slip on a plane rigid surface is located at

35
New cards

Infinity

For a 4-bar linkage in toggle position, the value of mechanical advantage is

36
New cards

Maximum-shear-stress theory

It is a failure prediction theory, which states that a part subjected to any combination of loads will fail (by yielding or fracturing) whenever the maximum shear stress exceeds a critical value. How do you call this failure prediction theory?

37
New cards

ASME B31.9

Which standard governs the design and installation of piping systems typically used in process plants and industrial facilities?

38
New cards

Fatigue notch factor

The ratio of the fatigue strength of a polished specimen at the same number of cycles is known as the

39
New cards

Rolling

For large-scale production, which steel forming process is considered the most cost-efficient?

40
New cards

Rigidity

When one more spring or resisting member share the load, the relative stiffness is known as

41
New cards

Stress Concentration Factor

It is a correction factor used to account for the nonuniform stress distributions.

42
New cards

Flactuating stress

Fatigue failure occurs when a part is subjected to:

43
New cards

4 links and 4 turning pairs

A kinematic chain needs a minimum

44
New cards

RT-1

On a pressure vessel nameplate, which designation indicates that the welds have been fully examined by radiographic testing?

45
New cards

Tolerance

The total permissible variation in the size of dimension: the difference between the limits of size.

46
New cards

6

How many independent motions can a rigid body have when moved freely in space?

47
New cards

API 510

Which code is commonly used as a reference for the inspection, repair, and maintenance of pressure vessels in refinery and petrochemical service?

48
New cards

Design stress = ultimate stress divided by factor of safety

In general, the design stress and factor of safety are related as follows:

49
New cards

Strain

The total deformation measured in the direction of the line of stress.

50
New cards

Elastic limit

The maximum stress to which a material can be subjected without a trace of any permanent set remaining upon a complete withdrawal of the stress.

51
New cards

High-density polyethylene (HDPE)

Which type of polyethylene exhibits the highest degree of crystallinity, resulting in greater stiffness, strength, and higher softening temperature?

52
New cards

Does not exhibit high modulud of elasticity

A soft material

53
New cards

Energy per unit volume stored in a deformed material

Strain energy is a measure of

54
New cards

Lateral strain

For any specific material, the percentage decrease in diameter is known as

55
New cards

Endurance Limit

The maximum stress induced in a material when subjected to alternate or repeated loading without causing failure.

56
New cards

Shear strength

The ability of metal to withstand forces thus following a number of twists.

57
New cards

Zinc

A coating material used to produce galvanized iron

58
New cards

Plastic region before reaching ultimate strength

Materials have a yield strength of 450 MPa and an ultimate strength of 700 MPa. If it is subjected to a tensile stress of 500 MPa, at what stage of the stress-strain curve is the material likely operating?

59
New cards

Kennedy's theorem

Which kinematic principle states that the instantaneous centers of three bodies in plane motion lie on a straight line?

60
New cards

1/16

According to code requirements, what is the minimum allowable thickness (inches), excluding corrosion allowance, for pressure vessels used in steam service?

61
New cards

Hardness

The property of steel which resist indention or penetration.

62
New cards

Martensite

The hardness of steel increase if it contains:

63
New cards

Fluctuating stress

Fatigue failure occurs when a part is subjected to:

64
New cards

Valve steel

Which steel type is specifically designed for service at elevated temperatures, offering strong resistance to creep, oxidation, and corrosion?

65
New cards

Aluminum

Which material does NOT exhibit a distinct endurance limit under cyclic loading?