1/62
Looks like no tags are added yet.
Three types of chemical rockets?
bi-propellant, mono-propellant, solid rocket
how does a Bi-Propellant rocket work?
one tank fuel and one tank oxidizer -> combine in combustion chamber -> generate heat out of the rocket
properties of bi-proppellant rockets?
higher Isp than Mono-propellant, more complicated
how does a mono-propellant rocket work?
one propellant -> run through catalyst on top of combustion chamber that makes the propellant want to break down -> generates heat out
what does Isp refer to?
the efficiency of the engine
properties of mono-propellant rockets?
lower Isp than Bi-propellant, simpler
who do solid rockets work?
fuel and oxidizer combine together -> once lit, lights up like a firework
properties of solid rockets?
higher thrust/weight ration than liquid, okay Isp, not restart able/throttleable
ideally expanded nozzle?
Pexit=Patm, comes out in a straight line
Under expanded nozzle?
Pexit > Patm, expands outward from nozzle
Over expanded nozzle?
Pexit < Patm, early separation from nozzle and compression
which expansion ratio is the most efficient?
ideally expanded nozzle
4 types of propolusion
chemical
electrical
nuclear
cold gas
properties of chemical propulsion?
high thrust, okay Isp
properties of electrical propulsion?
low thrust, very high Isp
properties of nuclear propulsion?
high thrust, high Isp
properties of cold gas propulsion?
low thrust and Isp, simple
what is staging?
dropping off an engine after its fuel has been depleted to reduce mass
advantages of staging?
1) high total payload mass delivered to orbit for a given delta V requirement
2) high total velocity achievable for a total vehicle mass
3) low engine efficiency required
4) reduce total vehicle mass for a given payload and delta V requirement
5) optimize the nozzle expansion for each stage to its operational altitude range
Disadvantages of staging?
1) Increased complexity
2) Decreased reliability/ greater chance for issues
3) Increased cost
what are expendable rockets?
designed to be discarded after single use
what are reusable rockets?
designed to be launched multiple times (including recovering rocket stages, engines, and other components)
advantages of reusable rockets?
1) lower launch costs
2) faster launch cadence
3) strategic flexibility
4) higher hardware utilization
5) environmental benefits
Disadvantages of Reusable Rockets?
1) payload penalty
2) higher mass and complexity
3) recovery cost
what is the reference point for a SOLAR day?
the sun
what is the reference point for a SIDEREAL day?
the vernal equinox
what orientation only allows one opportunity to launch?
when launch site latitude = inclination of orbit
what orientation only allows 2 opportunities to launch?
when launch site latitude < inclination of orbit (ascending node and descending node)
what orientation does not allow an opportunity to launch?
when the launch site latitude > inclination of orbit
what are the 4 phases of lanch?
1) Vertical ascent
2) Pitch Over
3) Gravity Turn
4) Vacuum
what is the origin of the SEZ frame?
launch pad
what is the fundamental frame of the SEZ frame?
local horizon (the ground)
what is the k-hat direction?
upwards, zenith
what is the principle (i-hat) direction?
south
what is the j-hat direction?
east
when calculating launch velocities, when does the flight path angle = 0?
perigee, apogee, or in a circular orbit
what is a Hohmann transfer?
a way to transition/transfer from an initial to a final orbit using intermediate transfer orbit
Hohmann transfer are the ____ fuel efficent transfers
MOST
assumptions for hohmann transfers?
1) both initial and final orbit are COPLANAR (inclination1=inclination2)
2) Orbits must be COAPSIDAL (both orbits share the same apsides)
3) Burns are INSTANTANEOUS (Ri=Rf)
4) Burns are TANGENTIAL (Vmagnitude changes, direction doesn't)
what if one of the orbits in circular?
a circular orbit can be coapsidal with any other orbit as long as the first assumption is true
tangential/hohmann burns change _____
magnitude
simple plane changes change _____
direction
combined plane changes change __________
magnitude and direction
where do you need to burn to change inclination?
ascending or descending node
where do you need to burn to change RAAN?
north or south pole
where is the most efficient location for a plane change?
further away from earth
rendezvous and proximity ops?
planning an executing maneuvers for 2 or more spacecraft to achieve a desired relative orientation or position
2 types of rendezvous?
co-planar and co-orbital
mission uses of RPO?
rendezvous + docking
satellite inspection
orbital warfare
on-orbit servicing
formation flying
3 phases of RPO?
1) plane matching
2) orbit shaping and alignment
3) orbit phasing
what COEs are connected to plane matching?
inclination and RAAN
what COEs are connected to orbit shaping and alignment?
eccentricity and argument of perigee
what COEs are connected to orbit phasing?
semi-major axis and true anomaly/argument of latitude
what is the origin of the RIC coordinate plane?
target satellite center of mass
what is the fundamental plane of the RIC coordinate plane?
target satellite orbit plane
what is the axes of the RIC coordinate plane?
x- radial
z- cross track
y- in track
what does the radial axis measure?
the vector form the center of the earth to the satellite (I hat)
what does the cross track axis measure?
angular momentum
what does the in-track axis measure?
local horizon, if a circular orbit-> velocity vector
assumptions of the Clohessy Wiltshire model?
1) restricted 2-body equation of motion with no perturbations
2) target is in a circular orbit
3) target and chase are "close" together, short timespans
when to use perch?
target and chase spacecraft are in the same orbit
when to use linear drift?
change in semi-major axis
when to use natural motion circumnavigation?
change in eccentricity