1/22
Looks like no tags are added yet.
Reagents / Solvents - Catalysts
standard Ochem arrow
H2O / H+
Hydration of Alkenes - SN1 reaction; r.d.s. = the formation of the carbocation; H2O attatches at most subst. carbon, then more H2O protonates the H leaving just OH
1) Hg(oAc)2 / H2O; 2) NaBH4
Oxymercuration - mercurinium ion formed at double bond, H2O attacks backside opening it up; in the end you have Markovnikov attachment of OH.
Results in + (HG)
1) Hg(oAc)2 / CH3CH2OH ; 2) NaBH4
Alkoxymercuration - same exact thing as Oxymercuration, but instead of H2O attaching, it’s a different solvent. The process is still the same though, it attaches fully as itself to the Markov. position, then it gets an H protonated off it.
Results in + (HG)
1) BH3-THF / 2) H2O, NaOH
Hydroboration - ANTI-Markov! Concerted syn addition. Basically just puts OH on anti-markov. position. Results in +H3BO3.
Br2 (or Cl2, but not I2) / CHCl2
Halogenation of Alkenes - Anti addition. Each add on opposite sides! Similar to oxymercuration, a triangular ion is formed with the halogen, than the extra halogen attacks either the LEFT or RIGHT side of the triangle.
Br2 (Cl2 or I2) / H2O
Formation of Halohydrins - Anti addition like the halogenation of Alkenes, but now OH attaches to the more substituted carbon, and the Halogen takes the anti position of the other carbon on the double bond.
1) mCPBA
Epoxidation of Alkenes - where the double bond is an epoxide is formed (triangle ion one, but with an O)
1) mCPBA / H2O
Opening of Epoxides - the epoxide gets formed just life before, but now it gets opened by H2O. Thus, you get two OH’s in an anti addition. 2 steps, no rearrangements! You will always get two products that are either enantiomers or a racemic mixture.
1) mCPBA / Basic Solvent (NaOH, NaoCH3, NaSCH3)
Same as opening of epoxides, but now the OH only attacks the LESS SUBST. Carbon, instead of equally attacking both sides. Creates one product from each enantiomer of the epoxide.
Kmno4 / H2O cold OR OsO4 / H2O2
Syn Di-hydroxylation of Alkenes - Adds to OHs, one on each carbon of the double bond; same side. Cis = meso, Trans = racemic!
Kmno4 = cheaper and safer
OsO4 = you can use less and you get a better yield, but unsafe and expensive
1) O3, CHCl2 / (CH3)2S
Ozonolysis of Alkenes - Breaks double bond in half with an Oxygen on the end of each half. C/t has no effect on this reaction. Results in +DMSO.
3 methods of polymerization:
1) Cationic
2) Free Radical
3) Anionic (rare)
Ru. Catayst
Olefin Metathesis - Tops above the double bond of each addition get combined in a 2 with one of each diagonal of each other. (Look at your notes)
1) NaNH2 / 2) Either a nucleophile or a ketone 3) H2O [H2O is optional if its SN2, Ketone always has it alongside it]
Alkylation of Alkynes -
2 methods - 1) SN2 rxn and 2) Ketone → Alcohol
1) SN2, the nucleophile directly attatches to the end of the triple bond; if there is H2O, it turns the O to an OH
2) Same process, but the double-bonded O in the ketone turns into an O substituite, then H2O comes in and turns it to an OH, which creates the alcohol
Alkyne; H2 / Pd, Pt, or Ni
Reduction of Alkynes (Full Hydrogenation) - 2 H2s are added to change the triple bond into a single bond.
Alkyne; H2 / Pd, BaSO4 poisoned with quinoline [Lindlar Catalyst]
Reduction of Alkynes (Partial Hydrogenation) - 1 H2 gets added to change the tiple bond into a cis double bond
Alkyne; Na (s) / NH3 (l)
Reduction of Alkynes (Dissolving Metal Reduction) - changes triple bond to a trans double bond
KOH / 200 degrees C
Synthesis of Alkynes (Internal Alkyne) - Two halogens (ex: Br) get hucked off and a triple bond gets formed in two ways, but the internal one is favored because KOH isn’t strong enough to protonate a terminal alkyne, so it favors the most substituted one.
NaNH2 / 150 degrees C
Synthesis of Alkynes (Terminal Alkyne) - Two halogens (ex: Br) get hucked off, and a triple bond gets formed in two ways, but the terminal alkyne gets favored because the base is strong enough
Alkyne; HBr, 2HCl, 2HI, Excess br, 1HCl, etc.
Addition of HX to Alkynes - Whatever it is it will add to the more stable position. Watch out for if there is only one, or if there is two.
Alkene; HgSO4, H2SO4
Hydration of Alkynes:
Terminal Alkynes - Form 1 product; Ketone where the two carbons of the triple bond are, but the right-side carbon is always there because the triple bond ends in an H rather than a C
Internal Alkyne - Forms 2 products; Ketone on each carbon of the triple bond
Alkyne; 1) Sia2BH / 2) H2O
Hydroboration of Alkynes - forms double bond O on both sides of the triple bond if it is internal, but also forms a double bonded O on the end with an H if the triple bond is terminal