1/39
Comprehensive flashcards covering plant water transport, transpiration, root hair cell adaptations, leaf anatomy, mineral nutrition, and potometer experiments.
What is transpiration?
The evaporation of water from plant leaves into the air through stomata. This happens because the moist interior of the leaf has a higher water vapor concentration than the drier air outside, causing water vapor to diffuse out.
What deficiency would plant have without Carbon, nitrate.
Without carbon, plants cannot build glucose or other carbohydrates for energy, causing stunted growth. Without nitrate (nitrogen), plants cannot synthesize amino acids, proteins, or chlorophyll, which leads to stunted growth and yellow leaves (chlorosis).
How is a continuous column of water maintained in the xylem against the force of gravity?
Water molecules stick to each other through cohesion. When water evaporates from the leaves, this cohesive attraction pulls the entire unbroken column of water upward through the xylem like a rope.
By what mechanism does water enter the root hair cells from the soil?
Osmosis. This occurs because the soil has a higher concentration of free water molecules than the root cell cytoplasm, so water naturally diffuses across the partially permeable cell membrane into the cell.
What are the three main adaptations of root hair cells?
1) Long extension: provides a large surface area to absorb water and minerals faster. 2) Thin cell wall: creates a short pathway for quick water uptake. 3) Active transport proteins: use cellular energy to absorb mineral ions from low concentrations in the soil.
What are the four primary processes that occur in leaves?
1) Photosynthesis: produces glucose using sunlight energy. 2) Gas exchange: absorbs CO<em>2 and releases O</em>2. 3) Transpiration: pulls water and dissolved minerals up from the roots while cooling the plant. 4) Transport: moves water in via xylem and distributes sugars via phloem.
How does gas exchange in a leaf differ between day and night?
During the day, CO<em>2 moves in and O</em>2 moves out because photosynthesis occurs faster than respiration. At night, O<em>2 moves in and CO</em>2 moves out because photosynthesis stops without sunlight while cellular respiration continues.
How is the palisade layer adapted for photosynthesis?
Its cells are packed with numerous chloroplasts and positioned directly beneath the upper epidermis to capture the maximum possible amount of sunlight for photosynthesis.
What is the function and structure of the spongy layer in a leaf?
It consists of loosely packed cells with large air spaces. This open network allows gases like CO<em>2 and O</em>2 to diffuse easily to and from cells, while providing space for water to evaporate from cell surfaces into vapor.
How do guard cells regulate transpiration?
When water enters guard cells, they swell and curve (become turgid), opening the stomatal pore to let water vapor out. When water is scarce, they lose water and become limp (flaccid), closing the pore to prevent dehydration.
What is the function of the waxy cuticle on a leaf?
It forms a waterproof, waxy barrier over the leaf surface. This reduces uncontrolled water loss because water cannot easily evaporate through the hydrophobic wax.
What is the role of stomata and where are they located?
They are microscopic pores primarily on the lower epidermis of the leaf. They open and close to allow gas exchange for photosynthesis and respiration while controlling water vapor loss during transpiration.
What substances does the xylem transport, and in which direction?
Water and dissolved mineral ions, transported in one direction upward from roots to leaves. This upward flow is driven by the pull of transpiration from the leaves.
What substance is carried by the phloem, and in which direction?
Dissolved sugars (sucrose) and amino acids, transported in both directions (up and down). This delivers energy and nutrients from photosynthetic leaves to growing or storage tissues throughout the plant.
From where do plants obtain carbon, hydrogen, and oxygen?
Plants take up hydrogen and oxygen from soil water (H<em>2O) via their roots, and they absorb carbon and oxygen from atmospheric carbon dioxide (CO</em>2) through leaf stomata.
Which three essential mineral elements do plants require for healthy growth?
Nitrogen, potassium, and phosphorus. Nitrogen is needed to build proteins and chlorophyll, potassium is required for enzyme activation and opening stomata, and phosphorus is needed to make DNA and cell membranes.

What apparatus is shown in the image, and what does it measure?
A potometer. It measures the rate of water uptake by a leafy shoot, which provides an estimate of the transpiration rate because water taken up replaces water lost by evaporation.
What key assumption is made when measuring transpiration with a potometer?
It assumes that the rate of water uptake equals the rate of water lost by transpiration. This is reasonable because roughly 98 to 99% of absorbed water evaporates, with only a small fraction used in photosynthesis and growth.
Why is a layer of oil added to the water surface and a woody shoot used in a potometer experiment?
The oil prevents water from evaporating directly from the container surface, and the woody shoot prevents water loss through the stem. This ensures all recorded water uptake is due strictly to leaf transpiration.
What serves as an appropriate control in a potometer experiment?
A leafy shoot or twig with all of its leaves removed. This verifies that water loss in the test plant is caused specifically by leaf stomata rather than equipment leaks or stem evaporation.
What equipment can be used to test the effects of light intensity, temperature, wind speed, and humidity on transpiration?
A lamp for light intensity, an incubator for temperature, a fan for wind speed, and a clear plastic bag misted with water for humidity. These allow single environmental variables to be changed while keeping others constant.
Why does a twig with all leaves removed serve as the control in a potometer experiment?
Because removing the leaves removes the stomata. If water uptake drops to near zero, it confirms that water uptake in the experimental setup is driven directly by transpiration from leaves.
Why does using a fan to increase wind speed increase transpiration rate in a potometer experiment?
The moving air sweeps away water vapor that accumulates around the leaf surface. This maintains a steep concentration gradient between the wet interior of the leaf and the dry surrounding air, speeding up diffusion.
Why does using an incubator to raise temperature increase the rate of transpiration?
Higher temperatures provide water molecules with more kinetic energy. This causes water to evaporate faster from spongy mesophyll cells and diffuse more quickly out of the open stomata.
Why does placing a clear plastic bag with water spray over leaves decrease transpiration rate?
It raises the humidity of the air around the leaves. This reduces the concentration gradient of water vapor between the leaf interior and the air, which slows down the diffusion of water vapor.
Why does using a lamp to increase light intensity lead to higher transpiration?
Light stimulates guard cells to take up water and become turgid, opening the stomata to let in CO2 for photosynthesis. These open pores allow more water vapor to escape.
Why are stomata located primarily on the lower epidermis on the underside of the leaf?
The underside of the leaf is cooler and shaded from direct sunlight and wind, which keeps evaporation rates lower and prevents excessive water loss.
Why does the spongy mesophyll layer contain large air spaces between cells?
To provide open channels for gases like CO<em>2 and O</em>2 to diffuse quickly between stomata and leaf cells, and to give water space to evaporate from cell surfaces into vapor.
Why do root hair cells absorb mineral ions via active transport rather than diffusion?
Because mineral ions are usually at a lower concentration in the soil than inside the root cells. Moving them against their concentration gradient requires energy (ATP) and transport proteins.
Why do root hair cells have thin cell walls?
To provide a short diffusion distance, allowing water and dissolved minerals to pass rapidly into the cell.
Why do root hair cells possess long, narrow extensions?
To dramatically increase the surface area in contact with soil moisture, speeding up the absorption of water and mineral ions.
What organic molecules do plants synthesize by combining carbon, hydrogen, and oxygen during photosynthesis?
Glucose, complex carbohydrates (like starch for storage and cellulose for cell walls), and lipids for long-term energy and membranes.
What deficiency symptoms do plants display when lacking potassium or phosphorus?
A potassium deficiency causes yellow leaves with dead spots and poor flowering/fruiting because enzymes fail. A phosphorus deficiency causes poor root growth and purple leaves because the plant cannot build sufficient DNA and cell membranes.
What term describes the transport of sucrose and amino acids through the phloem?
Translocation. This process moves sugars and nutrients from sources (leaves making sugar) to sinks (roots, fruits, or growing shoots using or storing sugar).
How do guard cells respond when water is scarce or in darkness?
They lose water by osmosis and become limp (flaccid). This changes their shape, closing the stomatal pore to prevent excessive water loss and dehydration.
Why is water uptake in a potometer not entirely identical to water lost by transpiration?
A small percentage (≈1 to 2%) of the absorbed water is kept by the plant cells to maintain cell turgidity and serve as a reactant in photosynthesis.
Why must a plant shoot be cut underwater before setting up a potometer?
To prevent air from being sucked into the cut xylem vessels. An air bubble would break the continuous column of water held together by cohesive forces, stopping water transport.
Why does net gas exchange in leaves reverse between day and night?
During the day, photosynthesis occurs faster than respiration, resulting in a net intake of CO<em>2 and release of O</em>2. In darkness, photosynthesis ceases while respiration continues, causing a net intake of O<em>2 and release of CO</em>2.
How does a mass potometer measure the rate of transpiration?
It measures the total reduction in mass of the plant and its sealed container over time using a balance. Because the container prevents surface evaporation, all mass lost is due to water evaporating through leaf transpiration.
How do xylem vessels differ structurally from phloem sieve tubes?
Xylem vessels are hollow tubes of dead cells reinforced with waterproof lignin to withstand the tension of pulling water. Phloem tubes are made of living cells connected by perforated sieve plates to actively transport nutrient sap.