1/37
Looks like no tags are added yet.
What is a series circuit?
All of the components are in an unbroken loop [0.1.1].
What is a parallel circuit?
There are branches and not all components are on the same loop as each other (note: components in the same branch are in series with each other) [0.1.1].
What is required for charge to flow through a closed circuit?
A source of potential difference (e.g. cell, battery, or power pack) [0.1.1].
What is charge measured in?
Coulombs (C) [0.1.1]
What is current and its equation?
The rate of flow of charge (current = charge / time) [0.1.1].
How is current measured and in what units?
Measured in Amps (A) by an ammeter connected in series with a component [0.1.1, 0.1.2].
What is potential difference (voltage)?
Energy transferred to a component per unit of charge [0.1.2].
How is potential difference measured and in what units?
Measured in Volts (V) by putting a voltmeter in parallel (or 'across') with the component [0.1.1, 0.1.2].
How does potential difference affect current?
Higher potential difference = higher current (because the source of p.d. causes charge to flow) [0.1.1].
What is resistance and its units?
A measure of how hard it is for current to flow, measured in Ohms (Ω) [0.1.1, 0.1.2].
How does resistance affect current and how is it calculated?
Higher resistance = lower current. Calculated using: resistance = potential difference / current (or measured with an ohmmeter) [0.1.1, 0.1.2].
What does a variable resistor do?
Changes the resistance in a circuit and therefore changes the current [0.1.1].
How does current behave in a series circuit?
It is the same everywhere [0.1.2].
How does current behave in a parallel circuit?
Total current is the sum of the branches [0.1.2].
How does potential difference behave in a series circuit?
Potential difference of the power supply is shared between the components [0.1.2].
How does potential difference behave in a parallel circuit?
It is the same everywhere (across each branch) [0.1.2].
How does resistance behave in a series circuit?
R_total = R1 + R2 (total resistance is the sum of the individual resistors) [0.1.2].
How does resistance behave in a parallel circuit?
Total resistance of two resistors is less than the resistance of the smallest individual resistor [0.1.2].
Core Practical: Method to investigate I-V characteristics (resistor, filament lamp, diode)
Describe and explain the I-V graph for a fixed resistor (at constant temperature)
Describe: Current is directly proportional to potential difference (straight line through origin — Ohm's Law, ohmic conductor). Explain: Resistance of the resistor is constant as current changes [0.1.3].
Describe the I-V graph for a filament lamp (bulb)
As p.d. increases, current increases. At low p.d., current is directly proportional. At higher p.d., current is NOT directly proportional so resistance is not constant (graph curves/levels off) [0.1.3].
Explain the I-V graph for a filament lamp (bulb)
As p.d. increases, temperature of the filament increases. Higher temperature = ions in the wire vibrate more = collide with free electrons in the wire more = higher resistance [0.1.3].
Describe and explain the I-V graph for a diode
Describe: No current until p.d. reaches threshold (x), then current increases in proportion with p.d. Explain: Current flows in one direction only; diode has a very high resistance in the reverse direction (prevents current flowing when reversed) [0.1.3].
How does a Light Dependent Resistor (LDR) work and what is an application?
As light intensity increases, resistance of an LDR decreases (meaning current increases). Application: switching lights on when it gets dark [0.1.4].
How does a thermistor work and what is an application?
Temperature-dependent resistor: as temperature increases, resistance decreases (meaning current increases). Application: thermostats [0.1.4].
What are the colours, voltages, and roles of the 3 wires in a UK plug?
Live wire: brown, 230V, carries alternating p.d. from supply. Neutral wire: blue, 0V, completes the circuit. Earth wire: green and yellow stripes, 0V, safety wire to stop appliance becoming live [0.1.4].
How does a fuse work?
Connected to the live wire; if too much current flows, the fuse wire overheats and melts, breaking the circuit for safety [0.1.4].
Explain the role of the earth wire (earthing)
Connected to metal case of appliance and a metal pipe underground. Normally carries no current (0V) and provides a low-resistance path to ground. If live wire comes loose and touches metal case, current flows through earth wire to ground, stopping casing becoming live and electrocuting someone [0.1.4].
Model answer: What happens if a person touches a live wire?
P.d. of live wire is 230V and p.d. of person is 0V. There is a large potential difference between the person and the live wire, so current flows through the person's body to earth and causes a shock [0.1.4].
Model answer: What happens if the earth wire touches a live wire?
P.d. of live wire is 230V and p.d. of earth wire is 0V. There is a large potential difference between them, so current flows and could cause a spark which may cause a fire [0.1.4].
What is the difference between alternating and direct potential difference, and what is UK mains supply?
Alternating p.d. constantly changes direction; direct p.d. is in one direction only. UK domestic mains electricity is an alternating supply with a frequency of 50Hz and potential difference of about 230V [0.1.4].
What are the 3 electrical power equations?
How does doubling current affect power in P = I²R vs P = VI?
In P = VI, power is directly proportional to current (doubling I doubles P). In P = I²R, power is proportional to current² (if current doubles, power increases ×4) [0.1.5].
What is the National Grid and how do step-up and step-down transformers work?
System of cables and transformers transferring electrical power from power stations to homes. Step-up transformers increase p.d. to reduce current; this reduces thermal energy lost to surroundings from high-resistance transmission cables, making transmission more efficient. Step-down transformers decrease p.d. to a much lower value (230V) to make it safe for homes [0.1.5].
What is the transformer equation for primary and secondary coils?
Vp × Ip = Vs × Is (potential difference in primary × current in primary = potential difference in secondary × current in secondary) [0.1.5].
How do energy transfers work in appliances (e.g. battery fan, electric heater) and what is the electrical work equation?
Battery fan: chemical potential energy in battery -> kinetic energy by motor + wasted internal energy to surroundings. Electric heater: energy from ac mains -> internal energy of heater. Energy transferred by electrical work: E = P × t [0.1.5].
What does a power rating tell us (e.g. 2,000 W)?
How quickly an appliance transfers energy. 2,000 W means it transfers 2,000 J of energy per second (1W = 1J/s) [0.1.5].