1/17
Vocabulary flashcards covering industrial pump and fan specifications, types, operating curves, and testing standards.
Screw pump
A pump type commonly used for handling viscous fluids like oil.
NPSH
The parameter representing the energy required at pump suction to avoid cavitation.
Reciprocating pump
A type of pump classified as a positive displacement pump.
Operating point
The point where the pump curve and the system curve intersect.
Multistage centrifugal pump
A pump type commonly used for boiler feed applications.
Peristaltic pump
A pump type that uses a flexible tube squeezed by rollers to move fluid.
API 610
The code that specifies centrifugal pump standards for petroleum industries.
Pump curve flow-head relationship
The operational characteristic where volume flow rate decreases as head increases.
Pump power affinity relationship
The principle stating that pump power becomes eight times when the pump speed is doubled (23=8).
Pump motor power determinants
The primary operating parameters that determine the motor power required for a pump, specifically head and efficiency.
Mechanical seal
The type of seal that is most reliable for high-pressure pumps.
Fan efficiency (η)
Defined by the formula η=Input shaft powerOutput air power.
Propeller fan
The fan type best suited for handling large volumes of clean air at low pressure.
Regenerative blower
A blower type that creates vacuum as well as pressure applications.
Pitot tube
An instrument commonly used to measure airflow in ducts.
Variable frequency drive
A common method used for fan speed control.
Aerofoil blades
The type of fan impeller blade most prone to erosion in dusty conditions.
AMCA Standard 210
A common standard used for testing fan performance.