CCNA - Day 11 (Part 2) - Static Routing

For an end host like a PC to send packets outside of its local network, it will send the packets to its […].

default gateway

A default route is a route to [network]/[netmask].

0.0.0.0/0

The […] route is the least specific route possible.

default (least specific route)

To send a packet to a destination, does a router need a route to every network in the path to the destination?

No (It only needs a route to the destination network)

Configure a static route, specifying the next-hop IP: R1(config)# […]

ip route ip-address netmask next-hop

Configure a static route, specifying the exit-interface: R1(config)# […]

ip route ip-address netmask exit-interface

Configure a static route, specifying the exit-interface and next-hop IP: R1(config)# […]

ip route ip-address netmask exit-interface next-hop

Code […] in the routing table indicates a static route.

S

Configure a default route, specifying the next-hop IP: R1(config)# […]

ip route 0.0.0.0 0.0.0.0 next-hop

Static routes in which you specify only the […] appear as directly-connected in the routing table.

exit-interface

A […] route is often used to direct traffic to the Internet.

default (directs traffic to the Internet)

In the routing table, the output "Gateway of last resort is not set" means […]

a default route has not been configured

Code […] in the routing table indicates a candidate default route.

*