Chapter 5 - Strategy and Tactics

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/38

encourage image

There's no tags or description

Looks like no tags are added yet.

39 Terms

1
New cards

__________ is the process of gathering and evaluating information from a fire to determine a course of action and prepare for response. (Page 124)

A) Size-up

B) Tactical readiness

C) Strategic planning

D) Operational readiness

A) Size-up

Size-up is the process of gathering and evaluating information about a fire or emergency to determine the appropriate course of action and prepare for an effective response.

Firefighters consider factors such as:

-The size and location of the fire.

-Building construction and occupancy.

-Fire conditions and potential hazards.

-Available resources and potential risks to life.

Size-up begins before arrival when information is received and continues throughout the incident as conditions change.

B) Tactical readiness: Refers to being prepared to carry out specific firefighting tasks, rather than evaluating the incident.

C) Strategic planning: Involves developing broader goals and an overall plan, rather than the initial process of gathering and evaluating incident information.

D) Operational readiness: Refers to having personnel, equipment, and resources prepared for deployment.

Study Tip

Size-up = See, assess, decide.

Firefighters assess the situation to determine what is happening, identify hazards, and decide what actions to take

2
New cards

A size-up report reports useful information that includes: (Page 125)

A) rank of officers.

B) name of town.

C) what type of apparatus being used.

D) incident size.

D) Incident size.

A size-up report communicates important information about the fire or emergency so firefighters and incident commanders can determine the appropriate response.

This information includes the size and extent of the incident, fire conditions, building or area involved, hazards, and whether additional resources are needed.

A) Rank of officers: Officer ranks do not describe the incident's conditions or severity.

B) Name of town: The location is important, but the town's name alone is not the key information this question is asking about.

C) What type of apparatus being used: Apparatus information may be relevant to resource coordination, but it does not describe the incident's size or conditions.

Study Tip

Size-up describes the situation. Think about what is burning, how big the incident is, what hazards exist, and what resources are needed.

3
New cards

A size-up report is intended to assist in establishing key information regarding incident conditions when: (Page 125)

A) first arriving on scene.

B) all agencies need specific information.

C) assigned a division.

D) participating in an escalating event.

A) First arriving on scene.

A size-up report is an initial assessment made by the first-arriving firefighter or officer to communicate important incident information, including the fire's location, size, conditions, hazards, and resource needs. This information helps incident command determine the appropriate response.

B) All agencies need specific information: Agencies may use the information, but this is not the primary timing or purpose described.

C) Assigned a division: A division supervisor may conduct ongoing assessments, but the initial size-up typically begins when the first unit arrives.

D) Participating in an escalating event: Size-ups continue throughout an incident, but the initial report is especially important upon arrival.

Study Tip

Remember: Arrive → Assess → Announce. First arrive at the scene, assess conditions, and announce your findings over the radio.

4
New cards

A size-up should start: (Page 124)

A) on the way into the fire station before the shift.

B) during the incident.

C) first arriving on scene.

D) once assigned a crew and resource.

A) on the way into the fire station before the shift.

A size-up begins before arriving at the incident. Firefighters should start gathering information and assessing potential hazards as early as possible, then continually update their assessment as new information becomes available.

B) During the incident: Size-up continues throughout the incident, but it should begin earlier.

C) First arriving on scene: The initial on-scene assessment is important, but it is not necessarily when size-up begins.

D) Once assigned a crew and resource: Waiting until resources are assigned delays the assessment process.

Study tip

Remember: Size-up starts early and continues throughout the incident.

Think of size-up as an ongoing process: gather information, assess hazards, make decisions, and reassess as conditions change.

5
New cards

When sizing up the weather factors, what are some important key elements? (Page 125)

A) Safest route to incident

B) Topography of the incident

C) Atmospheric pressure

D) Speed of the wind

A) Safest route to incident

When sizing up an incident, firefighters must consider how weather conditions could affect travel and access to the fire. Identifying the safest route helps crews avoid hazards and reach the incident safely.

B) Topography of the incident: Refers to terrain, which is a separate fire-behavior factor.

C) Atmospheric pressure: A weather element, but less directly relevant to the practical size-up point being tested.

D) Speed of the wind: A major influence on fire behavior, but apparently not the intended answer to this specific question.

Study tip

Remember: Size-up involves both hazards and access. When a question asks about practical considerations during an incident, look for options related to safe approach and crew safety.

6
New cards

When assessing the smoke column of a wildland fire upon arrival, if the smoke column is leaning, it is probably: (Page 125)

A) wind driven.

B) atmospherically unstable.

C) in heavy timber.

D) growing in intensity.

A) Wind driven.

When a wildland fire's smoke column is leaning to one side, it usually indicates that wind is pushing the smoke in a particular direction. Wind can also push flames, carry embers, and increase the rate and direction of fire spread.

B) Atmospherically unstable: An unstable atmosphere often produces a rapidly rising, billowing smoke column rather than simply a leaning one.

C) In heavy timber: Heavy timber describes the type of fuel burning, not the shape or direction of the smoke column.

D) Growing in intensity: An increasing fire may produce a stronger, taller column, but a leaning column alone does not establish that the fire is intensifying.

Study Tip

Remember: Leaning = wind; rising and billowing = possible atmospheric instability.

When sizing up a wildfire, observe the smoke column's shape, direction, and behavior to help assess fire conditions.

7
New cards

The smoke color is usually a reliable indication of the type of fuel in which the fire is burning. Light-colored smoke indicates: (Page 125)

A) brush fire.

B) heavy timber fuels.

C) light flashy fuels.

D) slash piles.

C) Light flashy fuels.

Light-colored smoke, often white or light gray, can indicate a fire burning light, fine fuels, such as grass and dry leaves. These fuels ignite quickly and can allow a wildfire to spread rapidly.

A) Brush fire: Brush can produce different smoke colors depending on moisture content and burning conditions; it is not the best answer here.

B) Heavy timber fuels: Large logs and heavy timber often produce thicker, darker smoke, especially when combustion is incomplete.

D) Slash piles: Piles of branches and logging debris can produce dense smoke, depending on moisture and combustion conditions.

Study Tip

Remember: Light smoke often suggests light fuels; dark smoke often suggests heavier fuels or incomplete combustion.

Keep in mind that smoke color is only a clue. Moisture, temperature, and combustion conditions can also affect its color.

8
New cards

After giving a report on conditions and ordering any additional resources, the company officer needs to make sure that __________ is/are in place. (Pages 125-126)

A) LCES

B) LCAS

C) sections

D) divisions

A) LCES

LCES stands for Lookouts, Communications, Escape Routes, and Safety Zones. After reporting conditions and requesting additional resources, the company officer must ensure these essential wildland firefighter safety measures are in place before engaging in operations.

L — Lookouts: Monitor fire behavior and hazards.

C — Communications: Maintain reliable communication among crew members.

E — Escape Routes: Identify routes to safety if conditions change.

S — Safety Zones: Identify areas where firefighters can survive without using a fire shelter.

B) LCAS: Not the standard acronym for the four essential wildland firefighter safety elements.

C) Sections: Organizational units used in incident management, not a basic firefighter safety system.

D) Divisions: Geographic organizational units used to manage incident operations, not a substitute for LCES.

Study Tip

Memorize LCES = Lookouts, Communications, Escape Routes, Safety Zones.

Think: Watch, Talk, Escape, Survive. These four elements help protect firefighters when fire behavior changes unexpectedly.

9
New cards

A size-up must evaluate fuels for which of the following fuel factors? (Page 126)

A) Escape route

B) Smoke color

C) Ladder fuels

D) Chimneys

C) Ladder fuels.

Ladder fuels are vegetation that allows fire to spread vertically from the ground into shrubs and tree crowns. Identifying ladder fuels during a wildland fire size-up helps firefighters assess the potential for a surface fire to become a dangerous crown fire.

A) Escape route: This is a firefighter safety consideration, not a fuel factor.

B) Smoke color: This is an indicator used to assess fire conditions and possible fuel types, not a specific fuel structure.

D) Chimneys: Although chimneys or chimney-like terrain features can influence fire behavior, they are not the specific fuel factor being asked about.

Study Tip

Remember: Ladder fuels = fire climbs the ladder.

Grass → shrubs → tree branches. This vertical connection allows fire to climb from the ground into the treetops, increasing fire intensity and danger.

10
New cards

Topography factors must be evaluated during a size-up because they can influence the rate of spread and direction of the fire. These topography factors include: (Page 126)

A) unstable air pressure.

B) terrain features.

C) LCES.

D) resources available.

B) Terrain features.

Topography refers to the shape and features of the land. During a wildland fire size-up, firefighters evaluate terrain because it influences the fire's rate and direction of spread.

Important terrain features include:

-Slope: Fires generally spread faster uphill because heat preheats fuels above the flames.

-Canyons: Can channel wind and intensify fire behavior.

-Ridges: Can affect wind patterns and fire movement.

A) Unstable air pressure: This relates to atmospheric conditions and weather, not topography.

C) LCES: A firefighter safety system meaning Lookouts, Communications, Escape Routes, and Safety Zones.

D) Resources available: This concerns personnel and equipment, not land features.

Study Tip

Remember the three major factors affecting wildland fire behavior: Weather, Topography, and Fuels (W-T-F).

For topography, think slope, canyons, and ridges.

11
New cards

Some considerations that weather can have a significant effect on a fire include: (Page 127)

A) LCAS.

B) thunderstorm activity.

C) resources available.

D) no frontal passage.

B) Thunderstorm activity.

Thunderstorm activity can significantly affect wildland fire behavior by producing strong, erratic winds, lightning strikes, and sudden changes in wind direction. These conditions can cause a fire to spread rapidly and unpredictably, putting firefighters at risk.

A) LCAS: Not the standard term for a weather condition that affects fire behavior.

C) Resources available: Refers to personnel and equipment, not weather.

D) No frontal passage: A frontal passage can significantly change wind, temperature, and humidity. However, thunderstorm activity is the clear weather-related hazard listed here.

Study Tip

Remember: Thunderstorms = wind, lightning, and unpredictability.

During a wildland fire size-up, always watch for thunderstorm activity because sudden outflow winds can rapidly change fire direction and intensity.

12
New cards

The first consideration and the highest priority in developing an IAP is always: (Page 128)

A) crew integrity.

B) life safety.

C) establishing incident command.

D) LCAS.

B) Life safety.

Life safety is the highest priority when developing an Incident Action Plan (IAP). The IAP outlines the objectives, strategies, and tactics for managing an incident while protecting firefighters, other emergency personnel, and the public.

A) Crew integrity: Keeping crews together is important for firefighter safety, but it falls under the broader priority of life safety.

C) Establishing incident command: Incident command is essential for organizing the response, but protecting lives remains the top priority.

D) LCAS: This is not the highest-level priority in developing an IAP. Firefighter safety systems support life safety.

Study Tip

Remember the standard incident priorities:

-Life safety

-Incident stabilization

-Property and environmental conservation

Think: Save lives first, control the incident second, protect property third.

13
New cards

__________ should be the second priority when developing an IAP. (Page 128)

A) Establishing incident command

B) LCAS

C) Stabilization of the incident or conservation of homes and property

D) Life safety

C) Stabilization of the incident or conservation of homes and property.

When developing an Incident Action Plan (IAP), the standard incident priorities are:

-Life safety — Protect the public and emergency responders.

-Incident stabilization — Control the incident and prevent it from getting worse.

-Property and environmental conservation — Protect homes, property, and natural resources.

Option C is the best answer because it describes the second priority: stabilizing the incident and protecting property.

A) Establishing incident command: An essential organizational function, but not the second incident priority.

B) LCAS: Not the standard second priority in developing an IAP.

D) Life safety: This is the first priority, not the second.

Study Tip

Memorize L-S-P:

-Life safety

-Stabilize the incident

-Property conservation

Think: Save lives, stabilize the situation, protect property.

14
New cards

The three components that form the building blocks of an effective strategy are: (Page 128)

A) life safety, resource management, and personal accountability.

B) task, purpose, and end state.

C) conservation of homes and property, life safety, and safety zones.

D) incident command, crew integrity, and resource management.

B) Task, purpose, and end state.

An effective strategy is built around three components:

-Task: What needs to be done?

-Purpose: Why does it need to be done?

-End state: What should the situation look like when the task is completed?

Together, these components help firefighters understand their assignments and how their actions support the overall incident objectives.

A) Life safety, resource management, and personal accountability: These are important operational priorities and responsibilities, not the three building blocks of a strategy.

C) Conservation of homes and property, life safety, and safety zones: These relate to incident priorities and firefighter safety, not the components of a strategy.

D) Incident command, crew integrity, and resource management: These are important organizational and operational principles, but they are not the three components described.

Study Tip

Remember T-P-E: Task, Purpose, End state.

Ask yourself:

Task: What am I doing?

Purpose: Why am I doing it?

End state: What result am I trying to achieve?

15
New cards

There are five components of the risk management process. One of those components is: (Page 128)

A) identifying hazards.

B) identifying terrain.

C) evaluating crews' capabilities.

D) tactical priorities.

A) Identifying hazards.

Identifying hazards is a key component of the risk management process. Firefighters must recognize potential dangers, such as changing fire behavior, hazardous terrain, falling trees, and shifting winds, before deciding how to manage risks.

The five commonly taught steps are:

-Identify hazards.

-Assess hazards.

-Develop controls and make risk decisions.

-Implement controls.

-Supervise and evaluate.

B) Identifying terrain: Terrain assessment is part of evaluating hazards, but it is not one of the five main process components.

C) Evaluating crews' capabilities: Crew capability is considered during risk assessment and planning, but it is not the standard name of a process component.

D) Tactical priorities: These guide incident operations but are not one of the five risk management steps.

Study Tip

Remember the sequence: Identify → Assess → Control → Implement → Supervise.

Think: Find the danger, evaluate it, decide how to manage it, put the plan into action, and monitor the results.

16
New cards

The location where a wildland fire begins is called the: (Page 129)

A) ignition point.

B) starting point.

C) area of origin.

D) head.

C) area of origin.

The area of origin is the location where a wildland fire begins. Investigators examine this area to determine the fire's cause and the circumstances surrounding its ignition.

A) Ignition point: Refers to the specific spot where ignition occurs, rather than the broader area where the fire began.

B) Starting point: An informal phrase, not the standard terminology used in this context.

D) Head: The portion of a fire spreading most rapidly, generally in the direction of the wind or upslope.

Study tip

Remember: Origin = where it began; head = where it spreads fastest.

This distinction is especially useful for wildland firefighting and fire investigation questions.

17
New cards

As the fire grows and moves into new fuel, the most rapidly spreading area and intense part of the fire is called the: (Page 129)

A) main body.

B) head.

C) flank.

D) heel.

B) Head.

The head of a wildland fire is the part that generally spreads the fastest and burns most intensely. It typically advances in the direction of the wind or uphill, where conditions favor rapid fire spread.

A) Main body: Refers generally to the central area of the fire, not necessarily its fastest-spreading part.

C) Flank: Refers to either side of the fire between the head and the heel.

D) Heel: The rear portion of the fire, which generally spreads more slowly than the head.

Study Tip

Remember the fire's basic anatomy:

-Head = front (fastest spread).

-Flanks = sides.

-Heel = rear (slowest spread).

Think of a person running: the head leads, the sides are the flanks, and the heel is at the back.

18
New cards

As the fire grows, a change in weather, topography, or fuel may cause it to move in such a way that it projects out into a long, narrow extension called a(n): (Page 129)

A) finger.

B) head.

C) island.

D) flank.

A) Finger.

A finger is a long, narrow extension that projects outward from the main body of a wildland fire. Changes in weather, topography, or fuel conditions can cause the fire to spread unevenly, creating these extensions.

B) Head: The part of the fire spreading most rapidly, generally in the direction of the wind or uphill.

C) Island: An unburned area of fuel surrounded by burned ground within the fire perimeter.

D) Flank: Either side of the fire between the head and the rear.

Study Tip

Remember the basic parts of a wildland fire:

-Finger: A narrow projection.

-Head: The fastest-spreading front.

-Flank: The sides.

-Island: An unburned patch inside the fire perimeter.

Memory trick: A finger sticks out from the main body of the fire, just like a finger extending from your hand.

19
New cards

__________ are physical barriers to fire, such as a roadway surface, that provide an area of safety for firefighters. (Page 129)

A) Anchor points

B) Islands

C) Safety zones

D) Escape routes

A) Anchor points

An anchor point is a secure location or physical barrier, such as a roadway, that firefighters use as a starting point for building a fireline. It helps prevent the fire from flanking around the fireline and reduces the risk of firefighters being surrounded by fire.

B) Islands: Unburned areas surrounded by burned ground within a fire perimeter.

C) Safety zones: Areas where firefighters can survive without using a fire shelter.

D) Escape routes: Paths firefighters use to reach safety when fire conditions become dangerous.

Study tip

Remember: Anchor = starting point.

Anchor point: Where you begin building a fireline.

Safety zone: Where you go for protection.

Escape route: How you get to safety.

20
New cards

__________ is a measurement from the middle of the advancing flame to the tip. (Page 129)

A) Average flame velocity

B) Chain

C) Flame length

D) Flame flank

C) Flame length.

Flame length is the distance measured along the flame from its origin near the middle of the advancing flame to the flame's tip. It is an important indicator of fire intensity and helps firefighters determine which suppression tactics are safe and effective.

A) Average flame velocity: Refers to the speed at which a flame moves, not its length.

B) Chain: A unit of measurement used in wildland firefighting and surveying, equal to 66 feet.

D) Flame flank: Refers to the side of a wildland fire, not a measurement of the flame itself.

Study Tip

Remember: Length = distance; velocity = speed.

Flame length helps firefighters estimate fire intensity and decide whether direct attack is safe.

21
New cards

__________ on a wildland and a ground-cover fire is mounted by containing and extinguishing the fire at its burning edge. (Page 131)

A) Transitional attack

B) Indirect attack

C) Defensive attack

D) Direct attack

D) Direct attack.

A direct attack is a wildland firefighting method in which firefighters work directly at the burning edge of the fire to contain and extinguish it. They may use water, hand tools, or other suppression methods to control the flames.

A) Transitional attack: Generally involves transitioning between offensive and defensive strategies, especially in structural firefighting.

B) Indirect attack: Firefighters construct control lines away from the active fire and may burn out intervening fuels.

C) Defensive attack: Focuses on protecting people, property, and strategic positions rather than directly extinguishing the fire at its edge.

Study Tip

Remember: Direct = at the edge; Indirect = away from the edge.

If firefighters attack the flames right where the fire is burning, think direct attack.

22
New cards

One type of a direct attack on a wildland fire is: (Page 131)

A) anchor, suppress, and pinch attack.

B) flanking attack.

C) transitional attack.

D) hold, flank, and pinch attack.

B) Flanking attack.

A flanking attack is a direct attack method in wildland firefighting. Firefighters work along the sides, or flanks, of the fire to contain its spread and suppress it, advancing as conditions allow.

A) Anchor, suppress, and pinch attack: This is not the standard name of the recognized anchor, flank, and pinch method.

C) Transitional attack: Generally refers to shifting between offensive and defensive strategies, especially in structural firefighting.

D) Hold, flank, and pinch attack: This is not the standard terminology for the direct-attack method.

Study Tip

Remember: Direct attack = fight the fire at its edge.

A flanking attack targets the sides of the fire, while an indirect attack establishes control lines away from the active fire.

23
New cards

A pincer attack is also known as the: (Page 131)

A) anchor, flank, and pinch attack.

B) flanking attack.

C) hold, flank, and pinch attack.

D) anchor, suppress, and pinch attack.

A) Anchor, flank, and pinch attack.

A pincer attack is also known as the anchor, flank, and pinch attack. Firefighters begin at a secure anchor point, work along the fire's flanks, and move to contain the fire by closing in around it when conditions permit.

B) Flanking attack: Describes attacking along the sides of a fire, but it is not the specific alternate name requested.

C) Hold, flank, and pinch attack: "Hold" is not the correct first step in the standard name.

D) Anchor, suppress, and pinch attack: "Suppress" is not the correct middle term; the standard phrase uses "flank."

Study Tip

Remember A-F-P: Anchor → Flank → Pinch.

Start at a secure point, work along the sides, and close in to contain the fire.

24
New cards

A pincer attack is a method of direct attack that requires: (Page 131)

A) sector, groups, and divisions.

B) bulldozers, aircraft, and suppression crews.

C) two or more teams of firefighters.

D) offsite incident management.

C) Two or more teams of firefighters.

A pincer attack is a direct wildland firefighting method in which two or more teams attack the fire from different sides, working toward each other to contain or suppress it.

A) Sector, groups, and divisions: These are organizational structures used to manage incident operations, not requirements for a pincer attack.

B) Bulldozers, aircraft, and suppression crews: These are possible firefighting resources, but they are not specifically required for this tactic.

D) Offsite incident management: Incident management may coordinate the response, but it is not a requirement of a pincer attack.

Study Tip

Remember: Pincer = pinch from two sides.

Imagine two teams closing in on a fire from opposite directions, like the two arms of a pair of pincers.

25
New cards

__________ attack involves engagement on both flanks of a wildland fire. (Page 131)

A) Multiple team

B) Narrow

C) Anchor, flank, and pinch

D) Flanking

C) Anchor, flank, and pinch

The anchor, flank, and pinch method involves establishing a secure anchor point, working along the flanks of the fire, and moving toward the center to contain it. This approach engages both sides of the fire and helps firefighters maintain a safer, more controlled attack.

A) Multiple team: Describes the use of multiple teams, not this specific attack method.

B) Narrow: Not the recognized tactical term for engaging both flanks.

D) Flanking: Refers to attacking along the sides, but it does not describe the full tactical method the question is testing.

Study tip

Remember: Anchor → Flank → Pinch.

Anchor: Establish a secure starting point.

Flank: Work along the sides.

Pinch: Bring the attack together toward the center.

Exam tip: When a question describes a specific method involving multiple steps, look for the complete tactical name rather than a general term like flanking.

26
New cards

The __________ is a method of direct attack that requires only one team of firefighters. (Page 131)

A) anchor, flank, and pinch attack

B) single resource attack

C) strike team

D) flanking attack

D) flanking attack

A flanking attack is a direct attack method in which firefighters work along the sides, or flanks, of a wildland fire. This method can be carried out by a single team working from a secure anchor point.

A) Anchor, flank, and pinch attack: Describes a specific sequence of tactical actions rather than the general method referenced by the question.

B) Single resource attack: Refers to the number or organization of resources involved, not necessarily the specific attack method.

C) Strike team: Consists of multiple similar resources working together under one leader.

Study tip

Remember: Flanking = fighting the sides of the fire.

Keep these terms distinct:

Flanking attack: Where firefighters attack.

Single resource: How many resources are assigned.

Strike team: A coordinated group of similar resources.

27
New cards

The decision regarding which flank of the fire to attack is based on the determination of which side of the fire: (Page 132)

A) is easiest to suppress.

B) has the smallest flame lengths.

C) poses the greater risk.

D) has the easiest access.

B) has the smallest flame lengths.

When deciding which flank of a wildland fire to attack, firefighters consider flame length because it indicates fire intensity and helps determine whether a direct attack is safe and practical. The flank with smaller flame lengths is generally safer and more suitable for direct suppression.

A) Is easiest to suppress: This may be a benefit, but it doesn't identify the specific fire-behavior indicator the question is testing.

C) Poses the greater risk: Firefighters must assess risk, but attacking the more dangerous flank first is not necessarily the tactic described here.

D) Has the easiest access: Access is important, but flame length is a more direct indicator of whether a flank can be attacked safely.

Study tip

Remember: Shorter flames = safer direct attack.

Flame length helps firefighters judge fire intensity and choose an appropriate suppression tactic. Always follow incident-specific safety procedures and reassess as conditions change.

28
New cards

__________ is most often used for large wildland and ground-cover fires that are too dangerous to approach. (Page 132)

A) Defensive attack

B) Direct attack

C) Indirect attack

D) Transitional attack

C) Indirect attack.

An indirect attack is commonly used for large wildland fires that are too dangerous to approach directly. Firefighters establish control lines away from the fire's edge, often using natural barriers or favorable terrain, to help contain the fire.

A) Defensive attack: Focuses on protecting people, property, and strategic positions rather than specifically describing the use of control lines away from the fire.

B) Direct attack: Involves suppressing the fire directly at its edge, which may be too dangerous in this situation.

D) Transitional attack: Generally describes a shift between offensive and defensive firefighting strategies, especially in structural firefighting.

Study Tip

Remember: Too dangerous to approach = indirect attack.

Direct: Fight the fire at its edge.

Indirect: Build control lines away from the fire.

29
New cards

A(n) __________ is mounted by building a fire control line along a predetermined route, based on natural fuel breaks or favorable breaks in the topography, and then burning out the intervening fuel. (Page 132)

A) direct attack

B) indirect attack

C) defensive attack

D) transitional attack

B) Indirect attack.

An indirect attack involves constructing a fire control line away from the active fire's edge, using natural barriers, fuel breaks, or favorable terrain. Firefighters may then intentionally burn the fuel between the control line and the approaching fire to remove combustible material and help stop the fire's spread.

A) Direct attack: Firefighters work directly at the fire's edge to suppress flames.

C) Defensive attack: A general defensive strategy focused on protecting people, property, or control lines; it is not the specific technique described.

D) Transitional attack: Generally refers to a fire suppression strategy that transitions between defensive and offensive operations, commonly in structural firefighting.

Study Tip

Remember:

Direct = at the fire.

Indirect = away from the fire.

An indirect attack uses a prepared control line and may involve burning out fuel ahead of the approaching fire.

30
New cards

A scratch line is a(n) __________, __________ control line that was quickly constructed. (Page 133)

A) unfinished; permanent

B) finished; temporary

C) finished; permanent

D) unfinished; temporary

D) Unfinished; temporary.

A scratch line is a quickly constructed, preliminary fire control line. It is generally unfinished and temporary, created to help firefighters initially control or slow a fire's spread until a more complete control line can be established.

A) Unfinished; permanent: A scratch line is unfinished, but it is not necessarily permanent.

B) Finished; temporary: A scratch line is preliminary and unfinished, not a completed control line.

C) Finished; permanent: Both terms are incorrect because a scratch line is not necessarily finished or permanent.

Study Tip

Remember: Scratch line = quick and temporary.

Think of it as the first rough line firefighters create before improving or completing the control line.

31
New cards

A hand line is a fireline constructed with: (Page 133)

A) hand tools.

B) hand lines.

C) many scratch lines.

D) strike teams.

A) Hand tools.

A hand line is a fireline constructed by firefighters using hand tools, such as shovels, pulaskis, hoes, and McLeod tools, to remove vegetation and expose mineral soil. This helps stop or slow a wildfire's spread.

B) Hand lines: Repeats the term being defined; it does not identify the tools used to construct the line.

C) Many scratch lines: A scratch line may be part of fireline construction, but this is not the definition of a hand line.

D) Strike teams: These are organized groups of firefighting resources, not tools used to construct a fireline.

Study Tip

Remember: Hand line = hand tools; machine line = heavy equipment.

This distinction is commonly tested in wildland firefighting exams.

32
New cards

Cold trailing is a technique where firefighters feel ashes and fuels to make sure: (Page 133)

A) their tactics are successful.

B) the fire is out.

C) their fireline is effective.

D) the fire is still burning.

B) the fire is out.

Cold trailing is a wildland firefighting technique in which firefighters carefully check burned areas by feeling ashes, soil, and fuels for residual heat. The goal is to find and extinguish hidden hot spots to ensure the fire is completely out and prevent it from rekindling.

A) Their tactics are successful: Cold trailing checks for remaining heat, not overall tactical success.

C) Their fireline is effective: Fireline effectiveness concerns containment, not specifically detecting residual heat.

D) The fire is still burning: The goal is to find hidden heat and confirm extinguishment, not to determine whether the fire should continue burning.

Study tip

Remember: Cold trailing = checking for heat.

If firefighters feel warmth in ashes or fuels, a hot spot may remain and needs to be extinguished. Cold means no detectable residual heat.

33
New cards

A machine line is completed by using a variety of: (Page 134)

A) hand saws.

B) chainsaws.

C) heavy equipment.

D) tactics.

C) Heavy equipment.

A machine line is a fire control line constructed using heavy equipment, such as bulldozers, to remove vegetation and expose mineral soil. This creates a barrier that helps prevent a wildfire from spreading.

A) Hand saws: Used for cutting vegetation manually, not for constructing a machine line.

B) Chainsaws: Used to cut trees and brush but are handheld tools, not heavy equipment.

D) Tactics: Tactics are strategies or methods, not machinery used to build a fireline.

Study Tip

Remember: Machine line = machines. Think bulldozers clearing vegetation and scraping soil to create a firebreak.

34
New cards

A wet line is distributed by: (Page 134)

A) heavy timber.

B) heavy equipment.

C) aircraft.

D) hand crews.

D) Hand crews.

A wet line is created by applying water or foam to vegetation and other fuels to slow or stop a fire's spread. Hand crews can establish a wet line using hoses, pumps, and other portable firefighting equipment.

A) Heavy timber: Timber is vegetation, not equipment used to distribute a wet line.

B) Heavy equipment: Bulldozers and similar machinery are generally used to construct firelines by removing vegetation and exposing soil.

C) Aircraft: Aircraft can drop water or fire retardant, but they are not the intended answer for establishing a wet line in this question.

D) Hand crews: Correct because firefighters on the ground can apply water or foam directly along a control line.

Study Tip

Remember: Wet line = water applied on the ground. Think of hand crews using hoses to wet vegetation and slow the fire's advance.

35
New cards

__________ is made up of a chemical solution, such as foam, that retards, or slows, the forward progress of the fire. (Page 134)

A) Chemical line

B) Detonation line

C) Retardant line

D) Wet line

C) Retardant line

A retardant line is created using a chemical solution that slows or retards the forward spread of a fire. The chemical treatment makes the fuel less likely to ignite or sustain combustion, helping firefighters control the fire's progress.

A) Chemical line: A general-sounding term, but not the specific terminology used in this question.

B) Detonation line: Associated with explosive operations, not a chemical fire-retardant barrier.

D) Wet line: Typically created by applying water or foam directly to fuels to suppress combustion.

Study tip

Remember: Retardant = retards (slows) fire spread.

Retardant line: Uses a fire-retardant chemical.

Wet line: Uses water or foam to wet fuels.

Exam tip: When a question specifically mentions a chemical solution that retards forward progress, look for the term retardant line.

36
New cards

A __________ is generally established by using natural barriers, such as a river, scree fields, cliffs, rockslides, or other fire resistive or fireproof features. (Page 134)

A) natural control line

B) topographic control line

C) nature line

D) man-made line

A) Natural control line

A natural control line uses existing natural barriers, such as rivers, cliffs, rockslides, and scree fields, to help stop or slow the spread of a wildfire. These features can serve as boundaries for fire-control operations without requiring firefighters to construct an entirely new line.

B) Topographic control line: Refers more specifically to features of the terrain; it is not the best match for the general term used in this question.

C) Nature line: Not a standard firefighting term.

D) Man-made line: A control line constructed by firefighters, such as a firebreak created by removing vegetation.

Study Tip

Remember: Natural = already there; man-made = built by firefighters.

Examples of natural barriers include rivers, cliffs, and rockslides.

37
New cards

A common threat to an existing control line could include: (Page 135)

A) human error.

B) spotting.

C) over confidence.

D) inadequate incident command.

B) Spotting.

Spotting occurs when burning embers are carried by wind or convection ahead of the main fire, igniting new fires beyond an existing control line. This can allow the fire to cross the line and continue spreading.

A) Human error: Can contribute to firefighting problems, but it is not the specific fire behavior threat described.

C) Overconfidence: Can lead to poor decisions, but it is not a direct physical threat to the control line.

D) Inadequate incident command: Can weaken overall fireground operations, but it is not the specific fire behavior hazard being asked about.

Study Tip

Remember: "Spotting jumps the line." Wind carries embers beyond the control line, potentially starting new fires on the unburned side.

38
New cards

The blackline concept consists of: (Page 135)

A) surrounding the fire with a scratch line.

B) creating a buffer of burned fuels at the fire's edge and the rest of the fire.

C) completely extinguishing the fire.

D) identifying the burned/unburned line.

B) Creating a buffer of burned fuels at the fire's edge and the rest of the fire.

The blackline concept in wildland firefighting involves burning or removing fuel along a control line to create a strip of burned ground, or "black," that helps prevent the fire from spreading into unburned fuels.

A) Surrounding the fire with a scratch line: A scratch line is a control line made by removing vegetation down to mineral soil; it is not the definition of the blackline concept.

C) Completely extinguishing the fire: Blacklining is a fire-control strategy, not the same as fully extinguishing a fire.

D) Identifying the burned/unburned line: This describes locating the fire's edge, not creating a burned fuel buffer.

Study Tip

Remember "Blackline = blackened fuel buffer." The goal is to create an area where combustible fuels have already been burned, helping reduce the chance of fire spreading across the line.

39
New cards

__________ is the process utilizing a fire engine that can pump water while moving and putting fire out at the same time. (Page 135)

A) Pumping and rolling

B) Anchor and drown

C) Bump and run

D) Tactical pumping

A) Pumping and rolling

Pumping and rolling is a firefighting technique in which a fire engine pumps water while moving forward, allowing firefighters to apply water to a fire while the vehicle is in motion. It is commonly used for fires such as grass and brush fires.

B) Anchor and drown: Not the standard term for pumping water while a fire engine is moving.

C) Bump and run: Not the standard term for this firefighting technique.

D) Tactical pumping: Refers more generally to pumping operations and is not the specific term for pumping water while moving.

Study Tip

Remember "Pumping and rolling = pumping while rolling." The fire engine keeps moving and discharges water at the same time.