1/23
Vocabulary practice flashcards covering standards, definitions, inspection intervals, defect classifications, and wildfire mitigation procedures from the UROC Standards Manual (Exhibit 14).
Section 1.1
Establishes minimum industry operational expectations for member utilities concerning inspection, maintenance, vegetation management, incident response, monitoring, emergency operations, and documentation to promote safety, reliability, and resilience.
Section 1.3: Status of Standards
Clarifies that UROC provisions reflect industry standards and best practices that do not independently create private rights of action or replace law; utilities must maintain policies meeting or exceeding these standards and may adopt more protective measures.
Section 1.4
Requires member utilities to periodically self-certify compliance and document any material departure, corrective action plan, and completion date, warning that repeated uncorrected noncompliance may prompt membership review.
Section 1.5: Core Defined Terms
Defines foundational operational concepts, including Comprehensive Inspection (in-depth review beyond drive-bys), Imminent Risk (present and substantial danger of failure, ignition, injury, or severe damage), and Qualified Field Resource (personnel possessing appropriate training, authority, and equipment).
Section 2.1: Safety as an Operational Priority
Mandates a safety-management system prioritizing public safety and wildfire prevention, expressly prohibiting financial, scheduling, or staffing constraints from overriding known or identifiable imminent risks.
Section 2.3 & Section 4.8
Requires detailed logging of all inspections, defects, maintenance, alarms, and de-energization choices, mandating that written or electronic inspection and maintenance records be preserved for at least 10years.
Section 3.3
Governs training for dispatchers and operators regarding monitoring limits and hazard escalation, specifically establishing that a clean SCADA telemetry reading is never conclusive proof that equipment is structurally intact or free from thermal or mechanical hazards.
Section 3.4
Requires utility personnel who identify hazards beyond their technical training or authority to escalate them promptly, while requiring member utilities to maintain non-retaliation protections for good-faith safety reporting.
Section 4.2
Mandates that member utilities conduct comprehensive inspections of all transmission lines and associated facilities at least once every 2months, inspecting towers, conductors, hardware, grounding, and clearances.
Section 4.3
Requires member utilities to conduct visual inspections of distribution lines, rights-of-way, poles, transformers, crossarms, and attachments at least once every 4weeks.
Section 4.4: Best-Practice Inspection Interval
Recommends conducting visual distribution patrols at least once every 2weeks within designated fire-prone, heavily vegetated, weather-exposed, or elevated-risk corridors.
Section 4.6: Inspection Methods and Diagnostic Tools
Requires inspection techniques to match the hazard being evaluated, requiring close-proximity diagnostics like bucket trucks, aerial observation, oil testing, or thermal imaging when ground-level patrols are insufficient.
Section 5.2: Objective Defect Classification
Rules that defects must be categorized strictly using objective safety criteria, prohibiting utilities from downgrading, deferring, or dismissing hazards due to cost, required outages, or staffing limits.
Section 5.3: Level One Defect Standards
Classifies conditions creating imminent risk of equipment failure, ignition, contact, injury, or severe property loss, mandating mitigation, isolation, or guarding ideally within 60minutes and no later than 90minutes.
Section 5.3: Level Two and Level Three Defect Standards
Assigns Level Two defects (materially increasing failure or fire risk without imminent danger) a repair deadline of 10calendar days, and Level Three defects (routine maintenance items) a repair deadline of 60calendar days.
Section 5.4
Permits defect deferral only when justified by documented causes, supervisory approval, and interim measures, explicitly forbidding any deferral of Level One defects without immediate interim protective controls.
Section 6.4.1: Transmission-Conductor Clearance
Mandates maintaining a continuous minimum radial clearance of at least 15feet between energized high-voltage transmission conductors and surrounding vegetation, increasing clearance where local conditions warrant.
Section 6.4.2 & Section 6.4.3: High-Risk Corridors and Pole Clearing
Requires annual inspection of high-risk vegetation corridors and mandates pole clearing to remove all dead, dying, or diseased vegetation within 10feet horizontally and 8feet vertically around pole bases.
Section 6.9: Emergency De-Energization Authority
Establishes that service continuity cannot take precedence over public safety, requiring prompt evaluation of line shutoffs during structural compromises, advancing fires, persistent arcing, or confirmed imminent hazards.
Section 6.12: Regulatory Vegetation Reporting
Obligates utilities to document any vegetation clearance noncompliance and submit a formal report to the Midlands Public Utility Commission within 7calendar days if immediate correction is not executed.
Section 7.2
Codifies the operational rule that an absence of SCADA alarms, fault indications, or relay trips does not confirm structural stability, since physical impacts and internal thermal defects routinely occur without tripping electrical relays.
Section 7.4
Requires prompt on-site qualified field verification whenever multi-sensor (temperature and particulate), sustained, or escalating alarms trigger along line segments with pending incidents or unresolved defects.
Section 8.2 & Section 8.3: Vehicle Collisions and Third-Party Contact
Mandates prompt dispatch of a qualified field resource following any reported physical strike or vehicle collision with energized infrastructure, regardless of whether circuits remain fully powered without SCADA fault alarms.
Section 8.4
Specifies that collision inspections must be comprehensive enough to uncover both apparent external damage and latent, internal structural or electrical damage using specialized diagnostic evaluations where warranted.