1/68
Looks like no tags are added yet.
suppositories
typically cylindrical or torpedo shaped with a pointed or rounded front end to allow for easier insertion.
wider torpedo shape helps to keep the suppositories inside the rectum after insertion.
req of base in suppository
should be non-irritating, help to moderate the drug release rate, and not chemically interact with the drug itself.
suppository bases are typically ________ in nature and made of substances that melt at _________ to allow drug release while suppository melts
fatty / body temp
what type of base is used for lipophilic drugs being delivered by suppository?
water-soluble bases
what type of base is used for hydrophilic drugs being delivered by suppository?
fatty bases
what causes the drug to experience delayed dissolution & diffusion in suppositories?
if the drug is attracted more to the base itself than it is to the aqueous fluid in the rectum/vagina
most current suppository bases do not experience __________ changes during heating close to the temperature needed to mold the suppository.
crystalline
effect of lower melting point of suppository
melts and releases drug faster than if suppository had higher melting point
typical fatty suppository bases are synthetic _______ derived fats
glycerol
When reacting fatty acids and glycerol, longer reaction times yield _____ triglycerides
more
The more hydroxyl groups present, the ______ reactive the resulting fatty suppository base.
more
purpose of adding surfactants to suppositories
may also have -OH groups, in order to increase the hydrophilicity of the base or help to emulsify the fatty acids.
significance of free hydroxyl groups in base (suppository)
plasticizer effect = greater # of free OH groups → more plastic the base becomes after cooling (flexibility helps prevent cracks in suppository during cooling)
post-hardening = suppository of a specific hardness becomes even harder over time in storage (increases w # free OH groups)
goal of plasticizing effect in suppository base
helps prevent cracks in suppository during cooling
greater numbers of -OH groups can lead to a __________ likelihood of reactions between the base and the contained drug.
greater
commonly used fatty suppository bases
● Cocoa Butter
● Witepsol series
● Suppocire series
water soluble bases are used for _________ drugs
hydrophobic
water soluble bases
used for hydrophobic drugs, allow the base to dissolve quickly to allow the drug to dissolve and be absorbed as readily as possible despite its poor solubility
most common water-soluble base
glycero-gelatin base, combining glycerin and gelatin. The glycerin provides flexibility while the gelatin increases the firmness of the suppository. Water will cause gelatin to swell. This means that glycero-gelatin suppositories must be packaged in moisture-resistant packaging.
Additionally, as glycero-gelatin suppositories swell after insertion in the rectum, this can lead to pressure in the rectum and an urge to defecate
how is a glycero-gelatin suppository compounded?
ingredients are weighed and then water and glycerin are stirred.
Powdered gelatin is added to the water mixture while stirring and then the container is weighed and covered for an hour.
After an hour it is heated to dissolve the gelatin with minimal stirring to avoid bubbles.
Once gelatin is dissolved, the container is weighed and water is added to bring the solution back to its original weight.
Once the solution starts to thicken as it cools it can be poured into lubricated molds.
Liquid petroleum, a hydrophobic lubricant, is commonly used for glycerol-gelatin suppositories.
typical mold sizes for adults (glycero-gelatin suppository)
around 2 grams for an adult
PEGs w higher numbers have ________ MW and form ________ solids
higher / harder
2 main water-soluble suppository bases
glycero-gelatin
polyethylene glycol (PEG)
why might diff PEG grades be mixed?
to reach correct hardness level
PEGS can be combined w propylene glycol or water to help _________ the finished suppository
soften
how do you combine PEGs?
the liquid PEGs should be warmed and the solid PEGs should be melted before combining to prevent any PEGs from becoming solid during mixing.
how do density diff in ing affect suppository formulation?
If the density of the active ingredient is much greater than the density of the base, it can be difficult to ensure consistent doses of the active ingredient
how do you ensure a suppository mold is not underfilled & is correctly dosed?
the ratio of the densities should be calculated (density of the API over the density of the suppository base) which is called the displacement factor (DF).
The displacement factor can then be used to calculate the amount of base that should be added.
You can then use the displacement factor to determine how much base is displaced by the weight of a given API
You can then subtract this amount from the total weight needed to fill the suppository to determine the weight of the base needed to fill the mold
how do you compound a PEG base suppository?
the ingredients will first be weighed.
then solid PEGs will be combined and melted while liquid PEGs will be combined and heated.
The active ingredient can then be incorporated into the liquid base.
The base can be poured into molds which are lubricated.
The molds are typically overfilled so that the mold is adequately filled once the PEGs cool and contract.
The excess can be trimmed after cooling and the suppositories can then be removed from the molds and packaged.
aerosol dosage form for rectal/vaginal use
aerosol foams
aerosol foams
emulsions with a propellant that is in the internal phase of the emulsion. When the emulsion is propelled out of the aerosol canister the propellant in the internal phase expands as there is gas within the surfactant coated emulsion droplets. This creates the bubbles that develop a foam formulation.
what determines stability of aerosol foam?
surfactant strength
liquid formulations for rectal/vaginal delivery
solutions, suspensions, or emulsions
ex. enemas, liquid suppositories which are liquids that form sol-gels after administration, vaginal douches, or feminine washes
Vaginal and rectal creams, gels, and ointments may add a ____________ to these formulations in order to help these dosage forms to adhere to the rectal or vaginal mucosa
mucoadhesive
Additionally, semisolids for vaginal use should be matched to vaginal pH of:
4.5-5.5
Gels, creams, and ointments need to easily spread as the rectal and vaginal areas are less easily accessible making ___________ more important
spontaneous spreading
Rectal formulations will typically have a_________ for insertion into the rectum to administer the dosage form
long nozzle
vaginal forms may have an applicator. how does this applicator work?
can be twisted onto the tube containing the dosage form allowing the tube to be squeezed until the reservoir in the applicator is filled. The applicator can then be removed from the dosage form container, inserted into the vaginal cavity, and the dosage form can be pushed out of the applicator.
describe rectum surface area for drug absorption
decent, but lacks villi/microvilli which give the SI its large surface area
major hurdle for rectal drug delivery
minimal fluid in the rectum, typically only 2-3 mL of mucus fluid, which can make dissolution of drugs for rectal administration difficult unless they are particularly soluble.
3 veins that supply blood to the rectum
superior rectal vein
middle rectal vein
inferior rectal vein
where does the superior rectal vein carry blood to first?
liver
where do the middle & inferior rectal veins carry blood to first?
systemic circulation
benefit of drug delivery to lower third of rectum
avoids first-pass metabolism
disadvantage of drugs delivered to upper 1/3 of rectum (deeper into rectum)
undergo first-pass metabolism prior to reaching systemic circulation.
advantages of rectal delivery
ease of administration, particularly when the oral route is less favored such as in nauseous or vomiting patients, unconscious patients, very large doses, very poor tasting drugs, or drugs for small children.
can offer improved absorption for drugs that are susceptible to degradation by acid or enzymes in the stomach or small intestine.
avoids several challenges with oral delivery including gastric emptying rate, first-pass metabolism, or upper GIT conditions (hyperacidity, etc.) that can negatively affect absorption, bioavailability, or speed of onset.
Rectal formulations, especially liquid formulations, often have a faster onset of action than orally administered drugs.
rectal administration is less prone to overdose than the oral route due to physical limitations of the delivery route.
major disadvantages of rectal drug delivery
defecation can decrease absorption. If a patient defecates following administration of a rectal dosage form, the remaining dose can be lost— can be compounded by the fact that rectal administration can sometimes induce the need to defecate due to the pressure a suppository can exert on the rectal wall.
the rectum has a higher presence of microorganisms and these microorganisms and their enzymes can lead to breakdown or degradation of specific drugs.
varies in patient acceptability
Suppositories can also often be more costly or less available than orally administered dosage forms.
Rectal administration is currently being explored as an alternative route for __________ drugs as these drugs tend to have poor oral bioavailability
protein or peptide
when is vaginal administration advantageous?
for local administration of medications for fungal or bacterial infections as well as for hormonal drugs. The vagina can also be used for systemically acting drugs as the vagina has extensive venous drainage. Vaginal blood flow reaches systemic circulation and bypasses first pass.
The vagina can also be used for systemically acting drugs as the vagina has extensive ________ drainage.
venous
does vaginal blood flow go through first-pass met?
no
vaginal tablets
Vaginal tablets are similar to conventional tablets in how they are manufactured, but are typically small and either oval or diamond shaped. The tablet is placed into an applicator and the applicator can be inserted into the vagina, the dosage form can be inserted into the vaginal canal through depressing the applicator, and then the applicator can be removed.
can be used for antifungals, antibiotics, and hormonal medications.
thin films
Thin films are similar to the films we discussed in the buccal drug delivery session. These are typically inserted by the patient using a finger. The film is mucoadhesive allowing it to attach to the vaginal mucosa and deliver drug over an extended period.
Currently, the only FDA approved vaginal thin film is a spermicidal contraceptive thin film.
vaginal rings
typically used to deliver female sex hormones for long term contraception.
The ring is elastic and is typically squeezed to form a thin oval for insertion into the vagina and then after insertion springs back to its round shape to hold it in place.
The ring itself is latex free, as latex is a common allergen, and contains both the hormone formulation and a block co-polymer which controls drug release.
The block co-polymer typically contains two or more polymers with one polymer being more hydrophobic than the other.
These polymers are alternated and the relative amounts of each polymer in the co-polymer block controls the rate of drug release
how long can a vaginal ring be left in place prior to removal?
3 weeks
what controls drug release in vaginal rings?
block co-polymer
what things does absorption thru the vaginal mucosa bypass?
first-pass effect
stomach acidity
enzymes that are barriers to oral administration thru the GIT
surface area of vaginal mucosa
60cm²
vaginal mucosa has similar absorptive properties to ________
buccal mucosa
why is the vaginal fluid pH range 4.5-5.5 for pre-menopausal women?
due to the presence of lactobacilli in the vaginal canal which convert glycogen to lactic acid
impacts ionization of drug
Drugs with a pKa above 5.5 will be predominantly ____________ which will allow them to readily permeate the mucosa.
unionized
3 ways drugs delivered vaginally can be absorbed
transcellular
paracellular
receptor-mediated endocytosis
receptor mediated endocytosis (RME)
Cells in the vagina can have receptors designed to recognize certain drugs, like sex hormones, and when the drug is recognized by these receptors it is taken into the cell through endocytosis.
when is vaginal drug delivery used?
for local delivery in the vagina to treat infections, delivery to the uterus, or systemic delivery for contraceptive hormones
first uterine pass effect
The venous plexus surrounding the vagina allows drugs absorbed into those blood vessels to pass to the uterus first rather than to systemic circulation.
why is first uterine pass effect beneficial for drugs like progesterone?
can be delivered preferentially to the uterus while maintaining low systemic levels of the hormone.
challenges of vaginal drug delivery
cyclical nature of hormonal levels that can lead to variation in the physiological factors that impact drug absorption including thickness of the vaginal epithelial cell layer, width of the interstitial spaces, vaginal secretions, vaginal pH, and drug metabolizing activity.
impacted by age-related factors such as menopause.
These factors can make the rate and amount of drug absorbed difficult to predict and therefore it is difficult to estimate the doses required for drug efficacy.
key advantages of vaginal drug delivery
bypassing first-pass metabolism
low enzymatic activity in the vaginal canal
lack of challenges present in GIT delivery (gastric emptying, acidity, etc.)
extended-release formulations that can be self administered
painless application
dosage forms are discrete
hormones can be delivered in lower doses as they have local effects
disadvantages of vaginal drug delivery
variations in physiology that impact absorption such as vaginal epithelium thickness, vaginal pH, and hormonal activity
systemic absorption can be unpredictable
formulations can leak or slip
dosage forms can cause local irritation
some dosage forms may interfere with coitus
some patients may have an aversion or may have a preference not to use this route due to its private nature